- 14
- 131 680
DubP
เข้าร่วมเมื่อ 7 เม.ย. 2016
Specifically General
Jetson Bolt Ebike Fork Bearing Adjustment
Shout out to the Facebook Jetson Bolt Electric Bike group, several people have asked how to adjust the head tube (or fork tube) bearing. I had to make this adjustment today, so I figured I'd make this video. As always, I hope it helps and sorry for my stuttering.
A lot of people ask about my handlebar setup, so here's a link to a Facebook post with all the part info:
m. groups/2837172053055450/permalink/6120483684724254/?mibextid=Nif5oz
A lot of people ask about my handlebar setup, so here's a link to a Facebook post with all the part info:
m. groups/2837172053055450/permalink/6120483684724254/?mibextid=Nif5oz
มุมมอง: 236
วีดีโอ
Schwalbe Super Moto-X 20 x 2.4 Ebike Tire
มุมมอง 5923 หลายเดือนก่อน
I'm replacing the 16 inch moped tires on my electric scooter with Schwalbe Moto-X Ebike tires.
Cheap Hands Free Hardware Cleanup
มุมมอง 1365 หลายเดือนก่อน
This is just the process I came up with for DIY fastener cleaning and rust removal. It's not perfect, but it's cheap and you didn't have to do any manual scrubbing. Basically, you just get a kid's rock tumbler and tumble the fasteners in detergent, then rinse and tumble them again with rust remover. There you go, you don't even have to watch the video now lol. Here's the best deal ever on a tum...
Tesla Model 3 Door Check Strap DIY Replacement
มุมมอง 5Kปีที่แล้ว
Tesla Model 3 Door Check Strap DIY Replacement
Ford 427 FE Top Oiler Teardown Part 2
มุมมอง 22K4 ปีที่แล้ว
Buy this engine on eBay here: www.ebay.com/itm/324199559957 This time I pull the heads and pan of the 427. Looks good!
Ford 427 FE Top Oiler Teardown Part 1
มุมมอง 74K4 ปีที่แล้ว
Buy this engine on eBay here: www.ebay.com/itm/324199559957 I'll be selling my 427 engine soon and in this video I take it apart to show the condition of the internals.
DIY Electric Scooter Part 2
มุมมอง 694 ปีที่แล้ว
This time I reprogram the Infineon controller for more current and throttle based regen.
DIY Electric Scooter Part 1
มุมมอง 1584 ปีที่แล้ว
Just going over the scooter I threw together using my kid's BMX bike and a cheap E-Bike kit.
RC10 Gold Pan
มุมมอง 1524 ปีที่แล้ว
I cleaned up an original RC10 for my friend, just wanted to show it off before it goes home.
OpenRC Truggy HSP Remix Part 2
มุมมอง 3.4K4 ปีที่แล้ว
The OpenRC Truggy is a 3D printed 1/10 Scale RC model. This remix uses HSP differentials and driveline components.The OpenRC TRuggy and the HSP remix are both available on Thingiverse. OpenRC TRuggy: www.thingiverse.com/thing:42198 OpenRC TRuggy HSP remix: www.thingiverse.com/thing:3939239
OpenRC Truggy HSP Remix Part 1
มุมมอง 3.9K4 ปีที่แล้ว
The OpenRC Truggy is a 3D printed 1/10 Scale RC model. This remix uses HSP differentials and driveline components.The OpenRC TRuggy and the HSP remix are both available on Thingiverse. OpenRC TRuggy: www.thingiverse.com/thing:42198/files OpenRC TRuggy HSP remix: www.thingiverse.com/thing:3939239
LPG (Propane) Conversion for LG DLGX9001V Dryer
มุมมอง 22K5 ปีที่แล้ว
LPG (Propane) Conversion for LG DLGX9001V Dryer
Thanks for this vid. it made the job easier...
Thank you for the step by step video!!!
Very good vídeo , thanks!!
Good step by step. Thanks.
just bought the 20x4 version..cant wait..
I think about buying 20x4 version too. Good quality, so people saying
This engine is a regurgitated Buick nailhead.
Does that make it good or bad?
How do you figure that? There isnt anything even close to a nailhead. I have 3 of them btw. The 425 is actually sitting in a house. Haha
I have been running the Michelin pilot street 80/90/16 on 20s but my frame is nowhere near as tight as it is for 26s originally, I did a lot of massaging with soap and used motorbike tyres. MXUS 3K Turbo hub and Sabvoton 72150. Good to see your build looking sweet, the Schwalbes are much better for your frame.
JFK era. Quite old for automotive engines. But Kaase keeps the venerable FE alive and better!!
Find more fe parts at survival motor sports Barry is a class act also dove engineering Jim dove and Robert pond still making blocks heads etc
PUTIT IN THE OBS
GOOD JOB
did you lubricate anything before taking it in?
Turbo good job with only one hand. You saved my life, bro. Thanks a lot and greetings from Germany.
Like comment and subscribe!
Ideally no need to change, loose a bolt attached to frame, push slightly strap down and while in this position tight the bolt. Original strap is much better and it's a slight adjustment which can help eliminate the noise. Save your $$$
It's the same as the original strap, purchased from the Tesla dealer. As for the adjustment, sounds like it's worth a try. I'm doubtful tho
@WilliamPatrickFrye i just did this adjustment for front 2 doors. Over a month now and no noise when closing. Slight hit and trial but worth the effort
Good job sticking to the point well done
Thanks!
Amazing video. Thank you so much for being very clear in your details and making the process easy to follow and throwing in a lot of relevant tips. Appreciate it.
Great video. Where did you buy this strap and how is holding now. No noises?
Yeah I remember when Ford Kicked Ferrari ass!! In 66 67 68 69 they got bored and left!! Oh yeah and for the 50th anniversary and won it again!! FORD!! A Better idea! 💡
Chevy started using the side bolt designs cuz they were buying cheap cast block that kept breaking crank bolts from the cheap casting material. Ford did that in the 60s to make there blocks last longer while racing and beating on the bottom end
Where did you buy your check strap? I bought 2 on E-bay and they click as bad as the old one
Got it at the Tesla dealership. So far still noise free.
I just posted a youtube video on how to fix this without buying a new check strap and without taking the door apart.... Chances are very likely that this noise will return.
Where’d you get this? thanks
Got the part at a Tesla dealer.
This video has been super useful for me. Congrats. Saludos desde España
Great demo DubP, and all done single handed! Thanks for sharing.
I’m going through same thing now. Tesla comes out Wednesday and will charge me $128. I would do this myself but I don’t have the tools 😢
Where did you buy the part, I got one off eBay and noise was even worse than old one?
That happend to me too...
I replaced two and they were both bad ...
Yup same here
I picked up the part in the video at the Tesla dealer. It was about 50 bucks. It's been 4 months and so far still nice and quiet.
Do you think to replace it without removing door panel ?
You cant.
Update: I just posted a youtube video on how to fix this without removing the door panel
Im confused are those screws or bolts And then some doe doe leans on your door an makes you repeat this process. Lol
I wonder how much he got for it??
SELL IT!?!?!?!?
Put it back in the galaxy and drive it kiddos 😢
Personal as a car guy and as a ford guy all my life I dont think you should have touched it regarless of your thoughts on how it looks on the inside or whatever your excuse was you ruined a chance of someone making that motor a survivor from the 60s now it hast to be rebuilt with all modern stuff thats not from the 60s like it was originally sorry but my opinion is if you dont know what your doing just leave it alone
The motor was too rusted up to be used as a "survivor" engine. Just looking at the rust on the outside tells you that it needed to be taken apart and rebuilt.
Nice video! Mines has developed the same horrendous noise. I’ve heard somewhere you don’t have to take the door panel off to replace this.
Update: You dont. I just posted a youtube video on how to fix it without removing the door panel
That was pretty cool, 😎 👌😁👍
I had a 70 428 which was the best sounding engine i had. I also had a 64 427 HP but I never built it I sold it later as I was not going to use it. I would get it to idle about 650 rpm it would turn 3 revs then bark the tires and 3 revs and bark again lol
i have one out of a boat late model it looks clean still has all the marine on it i would sell it i am in california
😞 P r o m o s m
Don't sell it you will regret selling the 427
Why would you even think about getting rid of this? My opinion is you’re and idiot.🙈
Great video! I will remember it once my M3 will make such sounds. Up to now, I have only 16.000 kilometers 🙂
Nice video.
Nice fix man! Your braver than me, I just made a service appointment today. They are coming to replace both check straps for free in a couple of days. It’s covered under my 4 year 50k miles warranty. I have a 2022 model 3
I knew it was real as soon as I saw the cross bolted mains.
HOW MUCH ???TY JOHN
That means this is a 427 that feeds the cam bearings and lifter gallery before it feeds the mains and the rods like 390/428s... The oiling system can or could be reworked, to aid in oil flow priority, but I wouldn't do that to this motor. Just freshen it up maybe warm it over that's it. May find its way into a nice Cougar or something somewhere. Swapping this 427 in place of a stock motor shouldn't hurt the value of most FoMoCo's, the 427 was available as a dealer-installed option on any FORD of the day.
Still for sale?
You'll never own another one
Thanks to you, I converted my dryer today! It took less time to convert it than it took to hook up that stupid dryer vent!
Thanks! Propane installation/conversion appears to be an afterthought in my neck of the woods. I bought an LG dryer with installation from LGPartnerMall and the outfit that delivered with a “certified install tech” termination said they didn’t do propane conversions. Tech said wouldn’t even disconnect the old dryer. Luckily I had already done that or they wouldn’t have hauled the old unit away. SMH