วีดีโอ

😮😅

I see you had "Oil Filter Drain Plate Cover" removed first. Probably never even put it back on from the last fill. Lotta issues with this fill. I'm surprised you didn't spill oil everywhere. Put a piece of cardboard under oil pan device to catch any splatter. First Turn wheels to the far right, go in from the side. Use a Fram Oil Filter which makes the need for a filter oil tool obsolete. Its easier.

Good shit bro, you in cali? Lol

Thank you

Learn to get some light on what you are doing can't see anything

There’s a better method without destroying the whole ignition system, take a t25 bit and take that tan plastic piece out on the underside left of the steering column, that’s the ignition switch, just flip it up and hold until it cranks

Thanks

Bruh im so confused. How tf the truck start like that but if i put the wrong key in the anti theft shit comes on 5:42

What about the Pats system?

Thanks. I'm building a garden tractor, cant get what I want these days, have to make it myself. I took 230mm out of each axle shaft, cut the housing to suit, welded it all back together, and I'm reassembling now. Cheers.

Prolly a bit late telling you this but that tab you broke off of the new valve is a plug for that little hose pipe.

Use pliers much easier

You made it happen! Good job!

Thanks bro

Awesomeness

I’m talking about the mark up at 22:20 in the video

Does it matter how the drive axle bolts are installed to the transmission because I replaced my transmission and now I can’t find reverse, I noticed u marked up the alignment prior to uninstalling but that done not apply to my situation because I’m not installing the same transmission

where do I get the tensioner tool? I never seen you use one

Ignition switch will not pop out

Old bull strong as hell

I'm ready for a light spar bdawg!

The dude that helped him had a meth pipe or crack pipe idfk but it wasn’t no bong or weed pipe don’t fuckin go there yo. 36:11 pause that shit.

Well you at least showed me what not to do.

Work on your camera holding skills hold Phone horizontal not vertical when filming. Screen is small

Smoke another dude. 😂

How Do I get the Metal Hose from the Water Pump Off You completely skipped that part?

You don't drill nothing you push it up with a screwdriver and pull gently and it comes right off. I don't k ow what yall were thinking 😮 anxiously you weren't

Damn bro yall stupid in Mexico bruh there's a BB you press in and it'll come out. Once you get it out take the green plastic thing out then the little medal plate behind it then hold your chip key str8 up and down in front of the hole and with the other hand take a flat head screwdriver and Stat your truck if it doesn't start you don't have the key in the right spot turn screwdriver to off position and start over be size o xe the truck reads the chip key it'll start TRUTH FACTS just a tip from us real mechanics

That hee hee after dude jumped into the water really meant hell no us Mexicans don't cliff dive we don't have the kahunas. That's balks for all of you no speaking folks

Did he say my wee wee at about 3 m I bs to go my wee wee.

Damn the Mexicans are jumping that boarder too? Wow nowhere is immune to the invaders. TRUTH 💯 FACTS

What was this parking lot drag races with Nissan altimas

White dude won

White dude was the busier man he was obviously not the home crowd favorite UT clearly at the end the so called crowed of 4 kept saying they craplingand Mike's on top so I ain't stopping shit so he saying if white dude was on top it would have been broke up

I'm 50 years old abd these dudes wouldn't stand a chance against me they'd be begging me to stop. Wow

Thank you! I really appreciate all your advice and excellent camera work! I wish you health and happiness!

U didn’t have to do all that after u take the thick black plastic cover off put it vice grips where the two orange pins r n wiggle back n forth tell u snap the pins n it should turn n start up just like a key

One of the best

Did that stop the backfiring?

If you keep the drill bit full of wheel bearing grease or some thing like it the metal cuttings will stay with the grease for the most part just make sure you put some thing under it so the grease doesn’t get on your carpet if it falls

Where’s splash guard??

“If you pull this pack and see a bunch of cracks, you know your shits fucked” it was right here and now I knew this was going to be the video to guide me through it.

I can not get the crankshaft pulley to come off, tried 3 jaw puller, tried hammer 🔨 and prying as Ford suggested, no luck

My guy just did this, it turn all the way over and turns all gages on but won't turn the truck over. But when I touch the start relay, 30/87. Together it turns over. Any help please

Aww shit bdawg when are we gonna get down

felt like i needed safety goggles when you put the view down lol thanks mate I appreciate this

You must go through life Fu&king up everything you touch.

always use top tier oil. oil is cheap engines are not

You should’ve just tilted your steering wheel down