วีดีโอ

Do you have any washing machines to record?

Was this Oklahoma

Great cleaning power

You know, I wish everything would last forever, but it just doesn’t even not even today’s thank you bye-bye

Lot of use old age it Was past its prime it was a gorgeous machine I will miss it, but life goes on where is there a Maytag when you need one it was 39 years old when it went bye-bye I was sad to see it go but we had a new one. No, I’m not living there no more I moved out. I heard so much about them. My mom and dad always had them. They were pretty good machines. The dryer would always make noise we tried to stop that we couldn’t. It was on its. last legs too. I live alone now with a roommate I seen appliances come and go where iused to live I have whirlpool now they come and go here to none of our appliances are original only the stove and the refrigerator are original I love the maytags better

Lot of use old age it Was past its prime it was a gorgeous machine I will miss it, but life goes on where is there a Maytag when you need one

Gave up the ghost poor thing it was beaten to the pope

We had one from 1984 It seem to last forever, but finally gave up

What year is it?

keep clear of spinning power unit

Ok so I’ve put the machine on a maintenance wash with nothing whatsoever in and it hasn’t squeaked so far, soooo? Wondering if it’s something simple I can do 😊

I love this machine.

I'm not trying to annoy you but can you film this on auto please. Its just because all of the machines i have dont have auto water level and i would like to use it but i dont have it

Is it 50 hz?

Hi, how did you know that it needed a new motor? Was it making a noise or something? We can't get this two speed motor here it's discontinued

Over half the vid, is looking at the closed washer...what's the point ? Wish the lid was open, maybe... Couldn't read the panel either. Cool washer tho. I guess.

Why can't you use auto?

Would love this in thw usa, i tell ya if this was a available to buy in the us, ya kno, the greatest market on the plane, apparently, but F&P Dont sell in the us anymore. I doubt they made that choice for nothing.. A machine like thisbwouod slake up the stale lame US washer market. Were the trend is less features, less options, less user control, shit cant even punp straight from our water boilers anymore, most HE machines, consoder 110 F a HOT, Wash temp... Funnly most is models, have like 7 water heat setting, cold tap clold, cool, warm, hot, then very hot.. so Absolutely NO. Sanitizing cloths here in the usa, uless u wanna use bleach, and only wear whites. At least for all rheblack of freaturs, our new high tech HE, Wonder washers at least have a reaaonsable cost.. hahaha, well since they agitate so weekly, don't give enough water to ever fill the tub past a quarter, at least the wash action is probably super awesome modern design, if you consider normal wash which takes an hour and a half to hours, which only includes a lame ass spin rinse, which it involves spinning and then adding about 12 seconds of water over the spinning soap laden coths. If you consider that a rinse, sure.. so all the American machines you can buy from the store, hardly use any water hardly can wash any large load size, despite the fact that they advertise drum size, with larger drums costing more, as if that made so you can wash anymore, because you can't, if you load the drum to half full you'll bear witness if you have bypass lid swich, the top of your clothes staying completely dry for the whole hour and a half as they are gently pushed back and forth by a half horsepower motor, combined with a impeller type wash plate that could never turn over clothes even if it was full for the top. And of course you're going to enjoy your clothes being sudsy and stinky because you're rinsing consists of 12 seconds of cold water sprayed over a spinning load, and you think oh that's got only be certain ones the cheap ones right, nope that's all the American modern machines, seems like anything after 2016 Whirlpool Samsung, LG GE through a lesser extent, and Hotpoint which is GE rebranded, they all work the same, and about 2018 I'd say they added a button which can be used on some of the cycles which are really don't differ from one another and any form, this button will usually be called deep fill or tub fill, well it's a lie, it does not deep fill it is not feel the tub, except in the case with certain GEs which is the only brand I would consider buying in America today, That or speed queen, if you want to spend over 1,000, of course there's also the one Maytag commercial unit which is amazing but also over a thousand, Whirlpool stopped making its commercial unit that was any good last year, there is literally nothing if you want to buy new, and you want your stuff clean, unless you enjoy smelling moldy soapy stinky clothes that cause your skin break out, and of course you better hope your clothes aren't actually dirty in any way because if they are you're going to quickly saturate that little tiny bit of wash water leave your clothes slashing around and scummy lukwarm water for an hour. At least in Europe, you guys kept to your guns, you can't find a machine out there that doesn't have a heating element that will heat the water to 90° c, also you have machines like this bad boy you can buy, despite the fact Europeans are only really into front loaders, I personally am not a big fan, not enough water for me,. But then again I work on cars all day and when I get covered in brake dust oil and engine k Fluids, which can only be removed from your skin using specialized hand soap like gojo, so my laundry requires a lot of water and heat to become somewhat clean... Here in America we don't even have the nice twin tubs, like the ones they selling Africa and other places India etc, the best twins are cheap Chinese models selling on Amazon, half of which don't even have drain punps, are entirely native plastic, and are built clearly to be as cheap and unreliable as possible, no Hoover wash dogs here, no Hoover twin thumbs at all, no Maytag twin tub, despite may tag being an American company.. there is no modern washers with any form of lint trap, or recirculating pump. If you

It almost sounds like a spring

Hope anyone will help me. So this is the same Maytag as seen in my previous videos. Recently it’s just starting squeaking during agitation, It was faulty when I got it, it needed new motor and 2 belts. I know your supposed to adjust the pump belt, I didn’t as due to it being first time working on one of these I didn’t want it too tight or too loose so I put both belts on as they were. I didn’t touch anything else apart from the motor and the 2 belts. The squeaking noises doesn’t affect it’s performance but still want to be pointed in the right direction to what it could be! 😊

The fast spin is awesome!

I got a GW612 today, it's the same time frame as this machine with the turquoise buttons and facure, and the issue it has, it still would do a load, but however, when I turned it on at the wall for the first time, the pump suddenly turned on, and then it jammed, and when I redone it to do a test spin cycle, the pump would run, but when the machine starts ramping up to 1000RPM, the pump jams. I pressed pause and the pump stayed on obviously jammed, even though it's meant to turn off when I press pause, and then I pushed the power button and the pump stopped. Bit of an odd one to solve, so I was wondering what could be the issue. My guess it could be the pump, or worse case senario it has something to do with the control board. You know what it would be?

Nice Washer.

Really is disappointing we can't buy new Fisher and Paykel agitator top loaders anymore. They do a good wash in a short amount of time. I currently have one of their front loaders which I love, so quiet and efficient.

Isn't It WA70T60FW1? The 8KGS Are WA80T65FW1

Maytags of this design had the worst rollover, and that's why Maytag ended up with the fate that it did because of this design, had Maytag kept the older design that had amazing rollover, they would still be around today.

These orbital transmission Maytags are built to last.

Oh it's really washing.

This is a good maytag.

nice maytag

Hi! Do you still own this machine? My screen just gave out on mine but the machine still works perfectly. I would really appreciate a demonstration of delicate cycle on warm. That way I can follow along with the clicks and get my clothes washed the way I like lol. Would you be willing to help?

Why do people constantly overload these machines?. They're supposed to be turnover freely. Cramming the thing too full.

Thats a nice Maytag! Is the water level factory set ? Anyway great machine !

Have you been able to disable the lid switch? You just have to lift the top and put in an object to hold the switch. You could even do it from the back if access is easy. Very nice machine by the way!

Not enough water. I don't see the clothes turning

I had a Fisher and Paykel top loader for yrs finally needed a new set but all I see is theyre new front loading washers I want a top loader I’m wondering where I can purchase the top loader washer

Pozdrawiam Serdecznie Z POLSKI 🇵🇱

Why do you always select the level yourself instead of leaving it on auto?

Why does this one look more modern than the phase 2 and 3?

😕 'Promo SM'

Maaan I wish I could find one. One of the last iterations before they stopped making top loaders for the U.S. market :(

The Bulky/Blankets cycle (also available as a Lifecycles selection) is hard-coded for a warm fill which is 50°C/122°F on my two Aquasmart models. It does two deep rinses (no after-wash spin or between the rinses). Spin is restricted to slow but a fast spin-only can be done after.

🤦🏽‍♂️🤦🏽‍♂️🤦🏽‍♂️

That machine is overloaded. Then people complain about how their clothes are not getting clean.

Excellent wash action for a wash plate washer.

It's completely overloaded. Why do people do that?

6:24 I love the sound these make during acceleration

To full for the clothes to move around and clean correctly.

Didn’t look like it had a nice wash

UPDATE: i managed to fix the machine a couple of weeks later after i had gotten it back, and i've just sold it today to a new home! So just remember there will be no more content of this machine by any means!! However i did update the panel to a second style MW one, so i have the LW095NZ panel to myself.