วีดีโอ

Hi my friend, If you watch carefully the video, you can see that I used the command "Shuttle" in DMU navigator to add all the single part of the landing gears into an assembly

Thank you

Hi, Do you want me to make a video for the detail of this animation or for a full design of this fan?

@@tonypham5720 kindly make a full design video

@@mech0797 I also planned to do this, What I need is time.

OK my friend, It’s because I thought people don’t want to waste time to watch a long video. For sure, I had ever made many very long videos but no one has enough patience to watch an entire over 1 hour video 😢😂

Thanks for your interest

Hi, As I know that DMU Kinematics Tool in catiav5 (or the old versions of catia) doesn't support to create a simulation for a spring as a single body. However, there are still several solutions to create a simulation or an animation for a spring: 1. the same way I did (separate a spring into the segments) 2. create kinematic simulation, activate sensors mode, use Laws (Formula) for the parameters of the spring as height, revolutions or pitch, simulate the spring then use the "video recorder" function in catia v5 to create frames for each step of kinematic simulation with sensor. (for sure, this is not a real kinematic simulation, that's just a way we create a video from many frames) 3. Use Analysis Tool in Catia in Catia, on the toolbar -> Analysis & Simulation -> Generative Structural Analysis. when using this function, the spring will be compressed by forces

Hi bro, Not CAD Drawing file but CAT Drawing, this is Catia. Do u still want that?

Sure, How do u want to get the file? I will upload it on google drive then send u the link or u want to receive it by email?

@@tonypham5720 I would be very happy if it could be done by e-mail.

Oki, 👍 I will

Hi, I already uploaded the video about what you asked for. Here's the link: th-cam.com/video/WChZs7mzXlI/w-d-xo.html thank you

@@tonypham5720 thank you Tony 😀

Sure, I will try to upload the files on google drive then send you the link, I never did this before. By the way, I am busy now, I will do it when I'm available and let u know when the files are uploaded.

hi, here's the link to download all the files you need. drive.google.com/file/d/1EgLY-oixkThTDCLc_Rc0Qzo03BO4HvQC/view?usp=sharing thank u very much for your interest and your support

Hi, Yes I will

Sure, my friend. Make sure that your catiaV5 version is equal or higher than mine (the same or newer). You cannot open my CAT files if your version was released before 2018.

👍 I'm glad to be of help!!!

Thank you!!!

OK bro, I'm gonna check my email

I did not find any new mail from you. Can u send it again?

I found it 👍

@@tonypham5720 ok bro

I'm already done on making a video for the 2d sketch that you sent to me but do not upload on youtube yet. I have to go to work. I will upload it when I get home.

Thank you, friend!!!!

My pleasure! U want me to make a video for this lcd display or u want me send it to u by email?

By the way, I'm at work now. Tell me how u want to receive the file, I will sent it to u when I get home

Thank you, Bro!!!!

Hi, Sorry for the late reply. Let me know If you still need the file. I will upload it on my google drive or any sharing file website then sending the link to you. By the way, I never dit this before

I will bro, but not in only one video, it's super long. I will make several videos for this design. Thanks for your interest

@@tonypham5720 ok Bro. Thank You

Hi, V5-6R2017

@@tonypham5720 thank you. And by the way, nice work.

@@hamzaameur304 thank you, bro!

Yes, of course How do u want to get it? By yours email?

Thank you!

Ok bro, no problem, but I'm at work now, I'll send you the file to u when I'm at home. tell me how I can send it to u?

@@tonypham5720 bro plz send the file of the LCD display Assembly

Hi, U can create any text or number in Catia by using Drafting. On the toolbar of Catia, above-left corner, click "Start" --> Mechanical Design --> Drafting --> click "OK" --> Drafting window will be opened. U can see the icon "T" for creating Text --> one click on that "T" icon (the icon T will be changed to orange color) --> one click on the grid page of Drafting then u can see a small "Text Editor" window will appear to write text.

And then, u have to save file under ".dxf". After creating Text, on the toolbar, click "File" then click "Save" (or u can also use short command as "Ctrl+S" on the keyboard to save file), a window appears, in the "Save file As" u chose "dxf" There are also several tutorial videos in my channel that I showed the details of creating text in Part & Shape Design

Hi, 👋 U can get the dimensions if you have a real adjustable wrench and a mesurement scale (a ruler, digital caliper or a tape mesure) in your hands 🙂. I did so, too. Or you can use the random dimensions if u can remember or imagine its shape when u design.

Email?

Or you can make your own dxf file in drafting, it's very easy my friend. Open drafting -> click "T" icon, after then write any text you want, and then selecting ".dxf" when you save file.

It's ok brother. Tqs for your time 👍😇

@@SathaSivam-qz3fz Did you fixed it already?

@@tonypham5720 yes brother, I fixed it by restarting using option.

You mean when you create a new part in assembly design then there's no partbody inside when you open it?

If it's possible, please open all the trees of the parts and take a photo then send it to me. Maybe I can help.

And can you tell me the way you create part in assembly design?

You can modify all parameters for partdesign by clicking "option" -> "infrastructure" -> "part infrastructure"

@@tonypham5720 I restarted it now it's perfectly working. Tqs brothers👍💙

Thank you

Hi, Cảm ơn bạn đã xem video và ủng hộ kênh của mình. Mình có thể giúp bạn điều gì ko?

Which ring did you talk about?

Inner or outer one?

@@tonypham5720 yes bro

U talk about 2 small lines at the middle of the inner ring?

I created using shaft command 360 ° with respect to H plane. But the cross line in upper and inner side of ring is not created straight to the H plane. The line is aligned certain degree. How can I make it straight

Please take a print screen photo to show your stuck and send it to my email "tony.pham.mdr@gmail.com" that will help me to see clearly your problem"

@@tonypham5720 TQ brother

👏👍 I do agree with you my friend, the movements of the adjustable jaw and the worm screw in the video are 2 separate movements, they are completely unrelate to each other. I just wanted to simulate the movement of the wrench based on visual view

Hi, Please watch my new video that I have made and uploaded to find out the Real Dynamic Kinematic Simulation for this Adjustable Wrench then let me know your thoughts. the link for new video: th-cam.com/video/3GaYXAmjL9Q/w-d-xo.html

Hi, The animation in this video is very simply, I think all 3d design professional software can do this. For this moment, I am focusing on design tools and machines, but soon, I will show everything that you guys had seen in my videos