วีดีโอ

@@johnsiczka916 I appreciate your supportive comment. I’m Happy to know the long form helped and hasn’t been a waste of time. Some people have not enjoyed the explanations, but I do it for those who want to learn. Ever since time stamps were introduced, I’ve added those to allow for people to skip to the area of interest.

@@user-pz8yd5jg7y 3:42 I’d avoid this speaker and by the oontz ultra for affordability, angle 3 pro for double the ultra’s price or jbl flip (get the year before the newest and save $$)

@@ytcreator5846 just for clarification for others that might be interested, how much cooler, was it under the same load (idle, load, same towing weight) and how did you take these temperature measurements (heat gun on the oil lines, engine, engine fill area or filter). Not sure if you’re aware or others that may want to know, the first number such as 10w is the viscosity at cooler temperatures and 30 or 40 refers to viscosity at hot temperatures and will be thicker the higher the number. Changing velocity can change fuel economy and could cause lubrication deficiencies by differing from engineering specifications. The thicker oil might be dissipating more heat without maxing out its heat absorbing potential. I don’t have any temperature problems as is (weather in central California summer is high 98-112) but I also don’t do any heavy towing; maybe a few times a year for yard stuff. That being said, this truck has towed 20’ fiberglass haul boats and trailers up steep grades (before replacing it with newer vehicles) and never overheated in its heyday.

@@tomclark9373 I was searching everywhere for this after my battery was replaced by a battery company that had the power hookup on to keep all my settings. Somehow the dash had faulted when I started my car, I think they shorted the terminals. I couldn’t find anything and was really worried it was going to be an expensive shop visit. Luckily I researched what the fuses were hooked up to and decided to use process of elimination on the easy stuff was worth a try. That fuse was hardest to test and easily overlooked since it’s covered. I found that the dealerships use this to keep the battery from draining and found out what it exactly turned off. On a whim I lucked out

@@IrishRose actually he was talking for 9:20 😂 and it was part 1 of 3. Aye video production is a tough gig when you got write the script, video edit, buy the equipment, have the knowledge and preform it on a $0 return 😳. But if you wanna see the machine work, the other videos attached at the end of this one show the artificial snow at the beginning / intro. This was more informative on how to make it snow if you’re in a hotter climate and the weather isn’t cold enough for a pressure washer and air snow gun.

@@IrishRose watch the beginning th-cam.com/video/0hS6uFnsyCg/w-d-xo.htmlsi=ApVSurjeKdMDl0PE

@@IrishRose watch the beginning th-cam.com/video/XBHfzRbBuXM/w-d-xo.htmlsi=Bcpow4L7tLRSHpeF

@@daswarlord8170 you’re welcome

@@1EVE1X no, it wasn’t my fault both times. My car got hit in the parking lot by a semi truck 🚛 that cut the corner too close. Paint was never fixed right and keeps peeling on the bumper to the frame gap after 5+ times of repaint for weeks at a time. The other time was a guy turned left when his lane was to go straight, clipping my front fender and bumper. That took multiple returns and weeks to get the color to match without a gold hue.

@ProjectAnubisUSA that's what I was looking at on my recent purchase of a 370z it had been in a front and rear collision separate times but the rear bumper looks a little yellow to my eye now I know why. the frame is perfect so I don't know how they got it without gaps but I just plan on wrapping it. And my Z was the base model so mine does not have the gear indicator guage it's just non existent

@@1EVE1X I noticed you can tell the color difference between paint through a tinted window when it’s in the sun, so sunglasses should show it. I found this out because the shop I kept returning to has a tinted waiting room window that I parked across from. No gear indicator? The little display one under the tack? Mine is also a base model automatic and I have that. The gap seam areas on mine are flawless, but that’s the problem. They were so tight that the paint cracked there and peeled back on this area about a 1/2”

@@ProjectAnubisUSA I will have to try the sunglasses trick thanks for the tip. I have the manual 6 speed but I seen other manuals that have them I just thought it would be nice to have them cause I want to mod the Z to have a cyberpunk vibe. I want to do the wrap myself so I can learn. I feel the body panels would be a simple and easy way to practice wrapping and where I live there is a lot of trees so I have to wash my Z every week so the sap does not ruin the paint

@@1EVE1X another tip, don’t leave your wrap on for more than a few years. After I did the roof, 3 years later the wrap micro cracked and cannot remove easily. Keep in mind Central cali gets up to 98-112F during 3 months in summer. I’ll never wrap anything again that I can’t remove without a razor blade as a future option 🤯

@@MikeMullerSkates nissan.worldoemparts.com/oem-parts/nissan-2009-2020-nissan-370z-lower-column-cover-484701ea0a

@@MikeMullerSkates I don’t recall since I bought items on eBay, and other places for parts, but here’s something to used to recommend a PN a few years back.

@@aubreymiller2476 you’re welcome. Way better than the AM FM transmitting type. Plus it it transmits and receives without being too expensive.

@@GabrielLopez-ec9fc yes, I reckon so; but the 3 gram mass breaks before it transfers all its liquid energy compared to the solid round transferring all its energy in the maintained diameter of 0.68”.

@@ProjectAnubisUSA that is true didn't think about that thanks for answering

@@thexchino8786 I just received it. My email for whatever reason doesn’t always pop up nor send unless I refresh and wait for it to load. It’s the iPhone version email app. I’ll respond right now though.

@@ProjectAnubisUSA sent you order details

@@KelleyYoungs well well well, ain’t that a doozy. Let me explain this again, I don’t want criminals to know how to do this exactly. I figured people who actually are intelligent enough to buy something would grasp the concept, since criminals are too dumb to understand how working for something pays better than a life in a cage. I would like to think most people who have jobs are not robots and actually have the drive to want more in life in which this tiny obstacle of a magnet placed on a particular area will release the tag. The technical stuff internally was a bonus and you didn’t really need to actually understand. Good thing I don’t make a living as a teacher, well can just blame Covid since that’s the reason for this video and my willingness to post a free tutorial. 😳 120 people were extremely happy 👍🏼, 49k needed help, and no bad comments just sayin’, it might’ve worked like I explained.

@@karlhiner1618 IKR!? Gotta get my $$$ worth. But seriously, I don’t recall what I phrased. I personally don’t carry any so it was probably on the principle of not being able to use it with the intent they sold you on. Sounds like an incomplete purchase if they cheaped out on something that wasn’t a big investment for them to stock. They could’ve included something better to present their product like a strap or elastic band like what’s used to hold a phone to a bike plate.

@@AGTAllGoodTimes you are welcome, they need to make it recall, I’m on the 3rd pump within 5 years. Might’ve been more since this car had another owner

@@ProjectAnubisUSA They extended the warranty on fuel pump(low preaaure). I Called and talked to hyundai motors the warranty on them got extended to 150,000 or 15 years what ever comes first. I was past the warranty in miles so i couldn't get replaced by hyundai . I'm currently at 225,000

@@AGTAllGoodTimes that’s awesome news! Is it the same replacement or a redesigned replacement? Hopefully it’s a redesign because the nipple will keep breaking or they need to replace the line with a more flexible gas line to relax the stiff line pushing on the nipple.

@@beardaxe920 they are hard to find the 420 Stainless Steel HX Outdoors Rescuer's Axe, it’s been 3+ years since I’ve posted this. www.ebay.com/itm/166852842293?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=DW-RAXL1Rie&sssrc=0&ssuid=DW-RAXL1Rie&var=&widget_ver=artemis&media=COPY www.airsoftgi.com/product/HX-Outdoors-Rescuers-Axe-w-Leather-Pouch-Black-23365/ www.grainger.com/product/GERBER-Hatchet-19-1-2-in-Overall-23NK25

@@joshuasutton4043 thanks, I appreciate the compliment. Just some advice, I’d stay away from wraps if you live in a hot climate and you’re not willing to rewrap every 2-3 years. Mine got destroyed during summer around year 3.

Yes, I’ve sprayed again. It lasted in the yard for a few months and on the cement areas 6 months. I’ve been happy with it but switched to bifin IT… it’s used commercially and has similar results but I’ve noticed it to be more potent. I refill my ortho 1 gallon sprayer for inside with it and use the Milwaukee sprayer for outside.

Yes, I’ve sprayed again. It lasted in the yard for a few months and on the cement areas 6 months. I’ve been happy with it but switched to bifin IT… it’s used commercially and has similar results but I’ve noticed it to be more potent. I refill my ortho 1 gallon sprayer for inside with it and use the Milwaukee sprayer for outside. Most companies if not all, stretch their results.

Yup, I love to talk about the interest I have. Especially running scenarios in my head of potential issues… you gotta know what you’re spending your hard earned money on. My day job requires me to be a critical thinker and it trickles down into everything I do. Maybe some advice, if the video is longer than 8min (typical attention span for conversation)…. Or maybe not even a “short” (typical attention span is 8 seconds to determine if you’re invested in the conversation)… it’s probably too long to stay attentive anyway. 🤯

This is for people who need it for rodents, glass breaking abilities, “something better than nothing” options (I recommend paperspray) and law dependent situations which people are limited to what they have access to. I should’ve been more clear about not shooting them. I actually shot them at a cardboard target for barrel testing but nothing at a distance nor with a proper setup to gauge accuracy and impact; which is why I said I didn’t use them yet. You can see in the background, distance wasn’t available to really see proper results. I just wanted people to be informed of what I could inspect before they commit to buying a larger supply since I knew my testing wouldn’t happen soon. I do have a sprinkler arsenal to remove those rodents off my lawn along with multiple fire ants 🐜 military stations. I can’t be exact on the numbers nor locations because that’s classified information. It’s the Cheapest way to fortify the house 24/7.

@ProjectAnubisUSA I was having a little fun at your expense. ☺️ I am very supportive of the community, but I wish you had provided more information to support your views. Thanks for the video, and I will try and be less critical if you try and provide a little more detail. Thanks, and I hope you have a great night.

Intro shows them getting aired up. If you’re looking for a factory ride feel don’t buy these. Most people who buy these want to air down when they what a lower truck and air up when they need to use them as a truck. They are more bouncy if you jump on the back under low pressure 25psi obviously; but you don’t get an airbag bounce when driving. You can take up to 200psi to firm them up but without any weight the back jumps a little when hitting potholes on low profile tires and rollpan bumper (light) which is to be expected.

You’re welcome, delighted to know it helped.

If interested in purchasing, my email is in the “about me” page for my custom version / printing services. I have the lid, deflector and internal ball ramp as options (hardware for assembly included); you will need to buy an Exault universal speed feed. Free print: images.app.goo.gl/CRZDD2h3UJGAtcbt5

Camber alignment? Or Toe in toe out? If it’s an identical factory part your replacing you can count threads on the tie rod area and match. You can also take a measurement before disassembling off a fixed known location. For camber, there are eccentric bolt washers on the upper A arms (control arm) with identification marks you can rematch. I only do this to allow me to drive until I can get an alignment. There’s a few ways to get you in the ballpark but unless you have an alignment machine your tires will wear faster (prematurely) than a perfect alignment. I always recommend getting the alignment done after replacing parts related to alignment; it’s cheaper than tires. Alignments are usually $60-$120 in my area of California, I tend to spend $80 when I do alignments with new tire purchases. Given, Tires last me 5+ years and it’s a good sanity routine that tells me if any suspension parts need replacing (they can’t do the alignment when ball joints are wore).

Yea I’ve had a small accident on my c1500 my front driver ball joint left the chat wile I was going down the road but I did all the front end my self including tierods,upper and lower control arms and bushings . But after I replaced my upper control arms my tires on the outside walls are like tipping in .”Note I am on a 4inch level kit but it shouldn’t be off like that did I not center the camber rite ? The ring adjusters “… also when I put it on reverse my steering stays straight but my tires seem to squat inner wise like if the tire is loose ? I’m lost could it be the Camper adjusters ? Orr idk I’m in the ends .

@@RAMIROGONZALEZ-tj2fx I have mine dropped 2” on spindles in the front with everything “stock” and 6” in the back shackles and hangers. If you put new control arms and the wheels lean in at the top then the camber needs adjusting. If the tires turn out or in when looking at it from the front the tie rod need adjusting. If you do all this and still looks way off especially on the accident side, then the accident could’ve bent the frame, tabs, spindle, rims, etc. Jackie it up from the frame and wiggle the tire to see if you have any play or loose bolts, it should be firm. Also, the front fender can play an illusion because it curves. If you drive it and it pulls to one side, squeak like tires or pops when backing out of a driveway at full steering turn; you’re alignment is way off

If it’s always random and mild, when you have a full tank or fill up It could also be the gas cap not sealing or the vent near the gas cap (all cars). But yes, definitely double check the fuel pump for piece of mind either way.

I recommend replacing it if it is a fuel pump since this repair didn’t last long.

Check out my other video on issues th-cam.com/video/LQtV37aRMp8/w-d-xo.htmlsi=7PHJcVKr6tYgN5ef

Yeah, I realized after recording it, GoPro 3 years ago didn’t do well. I thought by having my back to the lit area, it would allow everything to display nicely but it didn’t. I realized the video wasn’t worth redoing because I hadn’t put heavy use to them so I figured I’d redeem it eventually. Meanwhile I also wanted people to know what to keep in mind before potentially wasting their money on these (hatchet version also) if they want something more than a novelty.

Tremors

Also, do you mean the “the bigger opening end of the valve body faces the business end”?

If you worried about the dog point coming out… it would definitely help keep it fitted nicely, just make sure you don’t have loose tape extending past the thread, dangling into the marker where it can potentially jam the moving pieces.

@@icemanAU92at 11:40? The hole size is bigger on one end over the other and need to be put back the same direction as you took it out for everything to properly function. The larger hole faces away from the shooter and the small hole faces the shooter

I’m not 💯% but I’d say it won’t normally work because my Tesla 18650 batteries were too thick for this wrap. I think Tesla has a coating over them. It could also depend on your wrap brand. Also, don’t use rubberized heat shrink, it won’t fit in device due to the slight thickness increase. Average battery size (can change if it’s a flat top or nub) 18650: 18mm diameter x 65mm length 21700: 21mm diameter x 70mm length

@@ProjectAnubisUSA Thank you so much for taking the time to respond to me. I use the battery for a torch and I am planning on using a regular wrap (not a rubberised one). It's a 18650 battery but it's the height of a 21700: 18mm diameter x 70mm length So, do you think a normal 21700 wrap would work or would it be too big?

@@orangesquidge ohh, it’s a special size similar to how olight does. they have some weird proprietary batteries for their high powered flashlights. Some have chips on the top end and some even have double positive rings. The length is definitely needed if yours has disc on each side to hold in place as it wraps around the ends. Depending on the wrap quality, heat shrink has a shrink ratio 2:1, 3:1, 4:1 etc… I recommend looking to see or contact the wrap supplier to ask the shrink ratio. I think it would shrink 1/16 per side 1/8” total but it might distort your graphic. Also heat build up is a concern to make it shrink. Lastly, I’d be concerned about what’s underneath the end cap that makes it that long, you wouldn’t want to short it out nor potentially harm an electronic if any is under…. I recommend looking to see the shrink ratio of the 21700 battery wrap and see if you can find an image of what’s under that particular battery you have, even reaching out to the manufacturer. patents might also show a vague visual if they have one on public patent records.

Damn, what do you have… super bugs 🐞 BIFEN I/T is a step up from consumer to commercial.. I also went this route to save $$$ and spray the entire yard. It’s lasted 3 months even after it rained for a few weeks throughout it being applied. Dead roaches every day outside and they survive necular bombs 💣, and no ants

Should’ve got a plain Jane MR COFFEE ☕️ , I don’t drink coffee, so this wasn’t my pick. You might have to double check the puncture area or check the internal areas under the plastic shell

I haven’t ran it with anything heavy very long such as the line fed 48/3000 tank. I’ve been running a FS 15/4500 stock mount since that advancement came out. So, technically no issues on my light use but I can’t really say. If you’re hard on your gear (military care) I recommend getting heavier cordura 1000d or dual pane. I like stiffness because it feels more supported and stout; multi stitch, dual pane, 500d+. keep an eye out because I’ve noticed china does has a lot of random single pane 350d - “500d”on a lot of stuff to save costs. Another key component is the zipper, make sure they are larger YKK, it helps keep the material from snagging and zipper from derailing.

I’m hoping you’ll provide a better experience for everyone to see soon 🤞🏼 , I don’t mind tagging it. Only trying to give everyone the most information they can have before parting ways with their hard earned cash.

I’ve received a few this week, I believe I’ve replied

You’re welcome 👍🏼