Zappworx Short Films Tile Tutorials
Zappworx Short Films Tile Tutorials
  • 196
  • 168 116
Go Back Shower Board What I would Do Joe
Okay so I have heard about this product and watched some videos on it as well as talked to my suppliers. It's just like kerdi, prova and weldi board but I find this more dense. The gentlemen asked about it so I wanted to get information first. Most of the time I stick to kerdi and kerdi drains. Most of the time a cement base or rarely kerdi base. You do have another option and use the go back board as a shower pan but would set that part in last when doing your prep stage of location of drains and taps. I would cut 2 inch go board first and set them against the studs to get the level around the perimeter, 1 inch in from the opening wall for it's a curb. Next day put the 2 inch picture frame on top but not the pan base , first start on walls then pan last. Remember to back butter you go boards for shower pan before setting them in the bed of mortar and make sure to slope the x cuts to the drain and flush with the picture frame. I prefer to kerdi all the seams on walls and shower pan and kerdi corners as well. This will give you a levelled shower pan. I hope this helps.
มุมมอง: 1 297

วีดีโอ

None To Spare But Hoping! 24" By 24" Polished Marble
มุมมอง 477 ชั่วโมงที่ผ่านมา
It's scary knowing that there is none to spare of the 24' by 24' polished marble but I m hoping that I don't make a mistake. I hope you come back when everything is put together.
3 Wall Acrylic Shower Base Layout Part 2
มุมมอง 86314 ชั่วโมงที่ผ่านมา
Hello, on this project I am doing a tile gauge layout before installing. Make sure to plan your job out first. I usually start with a full tile on the opening of a shower If possible. I like my tiles to be full from the top and cut on the bottom. The tiles are going vertically stacked. Hope this helps.
3 Wall Acrylic Shower Base Kerdi Install Part One
มุมมอง 65816 ชั่วโมงที่ผ่านมา
Hello! I thought that I'd share some details about this project. I am using Schluter Kerdi and my cement is Schluter All Set. The next day I silicone the kerdi to the acrylic base before the tile install. Remember to protect your shower pan please.
Herringbone Time lapse
มุมมอง 356วันที่ผ่านมา
Herringbone Time lapse
Herringbone Layout Dry Fit Part Two
มุมมอง 1.3Kวันที่ผ่านมา
Hello everyone I am at the stage of installing herringbone on the upper and lower step but first need to layout the bottom portion before install.
Herringbone Layout Part One
มุมมอง 929วันที่ผ่านมา
Herringbone Layout Part One
Finally I Got This Posted!! It Finally Worked!! Better Bench Kerdi Install
มุมมอง 434วันที่ผ่านมา
Finally I Got This Posted!! It Finally Worked!! Better Bench Kerdi Install
Shower Better Bench What It Looks Like
มุมมอง 567วันที่ผ่านมา
Shower Better Bench What It Looks Like
30" By 30" Polished Marble Time lapse Install
มุมมอง 120วันที่ผ่านมา
30" By 30" Polished Marble Time lapse Install
30 mm Ditra And 30" By 30" Polished Marble Layout
มุมมอง 403วันที่ผ่านมา
30 mm Ditra And 30" By 30" Polished Marble Layout
Low Profile Schluter Kerdi Install For Shower
มุมมอง 1Kวันที่ผ่านมา
Low Profile Schluter Kerdi Install For Shower
How To Install 30mm Ditra And Low Profile Shower Base
มุมมอง 2.9K14 วันที่ผ่านมา
How To Install 30mm Ditra And Low Profile Shower Base
High Gloss Sealer On Honed Marble
มุมมอง 9214 วันที่ผ่านมา
High Gloss Sealer On Honed Marble
24" By 24" Marble Foyer Install
มุมมอง 24514 วันที่ผ่านมา
24" By 24" Marble Foyer Install
30 mm Schluter Ditra Install For Foyer
มุมมอง 16114 วันที่ผ่านมา
30 mm Schluter Ditra Install For Foyer
Completed Tiles
มุมมอง 183หลายเดือนก่อน
Completed Tiles
Low Profile En suite Prep Stage For Tile Install
มุมมอง 291หลายเดือนก่อน
Low Profile En suite Prep Stage For Tile Install
Kitchen Loft Back splash Tile Install
มุมมอง 2802 หลายเดือนก่อน
Kitchen Loft Back splash Tile Install
Lake House Tiled Bathroom En suite, Laundry Rm And Powder Rm
มุมมอง 742 หลายเดือนก่อน
Lake House Tiled Bathroom En suite, Laundry Rm And Powder Rm
Lake House My Part Completed
มุมมอง 1472 หลายเดือนก่อน
Lake House My Part Completed
Main Bathroom Laundry RM Backsplash
มุมมอง 702 หลายเดือนก่อน
Main Bathroom Laundry RM Backsplash
Second Floor Laundry Room
มุมมอง 1282 หลายเดือนก่อน
Second Floor Laundry Room
Low Profile Shower En suite
มุมมอง 1184 หลายเดือนก่อน
Low Profile Shower En suite
How To Install Sills Around Shower Niche
มุมมอง 2.2K4 หลายเดือนก่อน
How To Install Sills Around Shower Niche
Chicken, Duck or Goose
มุมมอง 1114 หลายเดือนก่อน
Chicken, Duck or Goose
How To Tile Shower Niche With Mitre Cuts And Shelf
มุมมอง 3.2K4 หลายเดือนก่อน
How To Tile Shower Niche With Mitre Cuts And Shelf
24" by 24" Hurricane Slate Tile Install In Laundry Rm
มุมมอง 5654 หลายเดือนก่อน
24" by 24" Hurricane Slate Tile Install In Laundry Rm
How To Gauge 8" by 8" Pattern Tiles On Shower Walls Install
มุมมอง 4304 หลายเดือนก่อน
How To Gauge 8" by 8" Pattern Tiles On Shower Walls Install
How To Waterproof Shower Walls For Tiles
มุมมอง 8164 หลายเดือนก่อน
How To Waterproof Shower Walls For Tiles

ความคิดเห็น

  • @zeus_2001
    @zeus_2001 10 ชั่วโมงที่ผ่านมา

    32:08 Canadian confirmed

  • @I-TILE
    @I-TILE 14 ชั่วโมงที่ผ่านมา

    Nice work, That Kerdi membrane works excellent over drywall. super clean!

  • @zappworxtiles
    @zappworxtiles 2 วันที่ผ่านมา

    Hi Joe you use modified cement to glue the boards down to floor and curb no screws on floor. I would use the kerdi band on the seams. I hope that video helped. Keep me posted I am here to help.

  • @Chowdown777
    @Chowdown777 3 วันที่ผ่านมา

    Thanks this is joe. I'm going to use the go board on the walls where the old fiberglass tub/shower was removed, Back wall two sides. I'm going be the plumber chip up the floor extend drain over to the center of shower floor, rectangle, front to back 31" x 59" left to right. So I'm going to cover the walls with go board and then I'm going to make the smallest curb i can out of go board. and use a sloped mud bed, sloped to the drain. They use a sealer in a caulking gun for all the go board seams and screws. I do like your idea of using the kerdi strips on all the corners and seams. Thank you so much. joe I'm not to sure about water proofing the curb?, how should i stick the layers of go board together for the curb? And you said screw the curb to the floor, long tap-con screws?

    • @zappworxtiles
      @zappworxtiles 2 วันที่ผ่านมา

      I just messaged you Joe

  • @erickbad2000
    @erickbad2000 3 วันที่ผ่านมา

    Curious why you have them spackle the drywall before putting the kerdi, doesn't it just create humps in the corners and seems?

    • @zappworxtiles
      @zappworxtiles 3 วันที่ผ่านมา

      Some builders feel more comfortable doing it that way. I prefer not to but my other builders don’t do that different builders. But yes it does bump out seams trying to get other builders to stop that.

    • @erickbad2000
      @erickbad2000 3 วันที่ผ่านมา

      @@zappworxtiles had a feeling, ill never understand why they do this to us

    • @zappworxtiles
      @zappworxtiles 3 วันที่ผ่านมา

      @@erickbad2000 this is true my friend

  • @GerKelleher
    @GerKelleher 4 วันที่ผ่านมา

    Great job

  • @GerKelleher
    @GerKelleher 5 วันที่ผ่านมา

    Nice work thanks

  • @Chowdown777
    @Chowdown777 6 วันที่ผ่านมา

    Hi thanks for all the great info. I like how you make your videos. I'm removing a tub/shower 31" x 59" and putting in the lowest curbed shower i can for my old age, while i still can. lowes has go board for my walls. Light weight. (I can install it myself) What's the lowest size curb that i can make and still use a shower curtain. And maybe make it out of go board ? What about water proofing the curb. Tile all the way to the ceiling ? I would love to here all you have to say about this. Thanks joe.

    • @zappworxtiles
      @zappworxtiles 6 วันที่ผ่านมา

      Hello Joe is there a tiled floor that you’re leaving in or removing the floor as well? I need to know this first. I am at work at the moment but will return your comments thanks

    • @Chowdown777
      @Chowdown777 6 วันที่ผ่านมา

      @@zappworxtiles Its on a cement slab, Three walls open front, with 18 x 18 tile right next to the fiberglass tub/shower. I'd like to keep the tile. I have to move the drain to center, and move valve handle up. Thanks

    • @zappworxtiles
      @zappworxtiles 6 วันที่ผ่านมา

      Hello Joe I haven’t used go board on my jobs but as long as it’s like prova or kerdi board it’s ok. Just follow those steps to install that product. You can use it to build your curb for sure. I would use ultraflex modified cement or unmodified. I will do research for you then post a video to answer your questions. Just give me a couple days Joe. I will let you know. Thanks

    • @Chowdown777
      @Chowdown777 6 วันที่ผ่านมา

      @@zappworxtiles That would be great I'll be watching (How to finish the curb?) Thank you

  • @TheIggypop1
    @TheIggypop1 6 วันที่ผ่านมา

    Kerdi system are garbage. Need to go the old school shit cost twice as much and it will still leak

    • @zappworxtiles
      @zappworxtiles 6 วันที่ผ่านมา

      Never had a leak

    • @zappworxtiles
      @zappworxtiles 6 วันที่ผ่านมา

      I have seen videos here on TH-cam of leaks but I use modified cement and not unmodified. I double the kerdi on my shower base all the time. Old school is good as well.

    • @TheIggypop1
      @TheIggypop1 6 วันที่ผ่านมา

      @@zappworxtiles just not impressed with it too many components

    • @zappworxtiles
      @zappworxtiles 6 วันที่ผ่านมา

      @@TheIggypop1 I hear ya brother, it’s been good for me so I stay with it and also I get it cheaper from the supplier as well but you are right nothing is cheap anymore.

  • @zappworxtiles
    @zappworxtiles 7 วันที่ผ่านมา

    No for there is no ceiling tile. I use silicone or a tube of kerdi fix along ceiling and wall. I kerdi band only for ceiling tiles but ceiling has 1/2 inch plywood with 1/8 inch prova board on the ceiling.

  • @zappworxtiles
    @zappworxtiles 7 วันที่ผ่านมา

    Thanks for sharing. Back in the day we did quite a bit 10 years ago. For myself I like my surface stronger. Depending on the installer, prova and kerdi are good products as well.

    • @joshbackstrom3115
      @joshbackstrom3115 7 วันที่ผ่านมา

      Do you put the kerdi band across the top of the wall and on the sides of the entrance of the shower too?

  • @joshbackstrom3115
    @joshbackstrom3115 7 วันที่ผ่านมา

    Thanks for the video, I personally prefer prova board or kerdi board and band. It takes me 30 minutes to do a shower with prova and about an hour for kerdi board.

  • @GerKelleher
    @GerKelleher 7 วันที่ผ่านมา

    Well done. Love the work , very welll explained👏👏👏👏👏👍👍👍👍✌️

  • @cheverev
    @cheverev 9 วันที่ผ่านมา

    Awesome

  • @djspock5150
    @djspock5150 11 วันที่ผ่านมา

    Great video, have to do a surround on my basement project above the fiberglass tub for the tile.

    • @zappworxtiles
      @zappworxtiles 11 วันที่ผ่านมา

      Thank you! I hope your project is a success. Please keep us posted all the best. Remember it’s about patience.

  • @HB-yq8gy
    @HB-yq8gy 11 วันที่ผ่านมา

    Nice detailed video for a noob like me. thanks

    • @zappworxtiles
      @zappworxtiles 11 วันที่ผ่านมา

      I can be a noob too it’s all good.

  • @zappworxtiles
    @zappworxtiles 12 วันที่ผ่านมา

    You can use drywall guys my builders aren’t dumb. They’re busy all the time for a reason they confirmed this years ago with Schluter. All is good. Never any leaks think about that comment didn’t make any sense.

  • @bostonmike6912
    @bostonmike6912 12 วันที่ผ่านมา

    drywall shower walls? That wall is going to rot out. Should have water proofed the walls before putting down the shower floor.

    • @strjourneys7919
      @strjourneys7919 12 วันที่ผ่านมา

      It's called drywall for a reason, it stays dry under any condition

  • @I-TILE
    @I-TILE 13 วันที่ผ่านมา

    Nice floor preperation

    • @zappworxtiles
      @zappworxtiles 13 วันที่ผ่านมา

      Glad you like it!

  • @zappworxtiles
    @zappworxtiles 14 วันที่ผ่านมา

    Please don’t use glue stick to modified cement.

  • @simonpetch
    @simonpetch 14 วันที่ผ่านมา

    Should of used glue, not adhesive on ply

  • @ajlewis4562
    @ajlewis4562 19 วันที่ผ่านมา

    It would be cool to see how you cut those mitres on the big tiles, especially due to the mitres on multiple sides

    • @zappworxtiles
      @zappworxtiles 19 วันที่ผ่านมา

      Hello I use a grinder for that. If I get to a project with big format tiles I will post.

  • @Andrew-vw8cm
    @Andrew-vw8cm 25 วันที่ผ่านมา

    Great video. The way you explain things is very concise and easy to follow, keep up the good work! Hope your channel gets more recognition 👍

    • @zappworxtiles
      @zappworxtiles 25 วันที่ผ่านมา

      Thank you for your kind words. It’s hard to get subs for sure but I won’t give up I promise.

  • @I-TILE
    @I-TILE หลายเดือนก่อน

    Beautiful Shower

    • @zappworxtiles
      @zappworxtiles หลายเดือนก่อน

      Thank you! 🤗

  • @I-TILE
    @I-TILE หลายเดือนก่อน

    Very nice time lapse

    • @zappworxtiles
      @zappworxtiles หลายเดือนก่อน

      Thank you very much!

  • @jalalr1
    @jalalr1 หลายเดือนก่อน

    Top notch!!! Subbed

    • @zappworxtiles
      @zappworxtiles หลายเดือนก่อน

      Thanks for the sub!

  • @horaceward6737
    @horaceward6737 หลายเดือนก่อน

    Clark is real horny!

  • @I-TILE
    @I-TILE หลายเดือนก่อน

    I like flashing ditra mat also

    • @zappworxtiles
      @zappworxtiles หลายเดือนก่อน

      How are you doing I-tile you keeping busy?

  • @I-TILE
    @I-TILE หลายเดือนก่อน

    Beautiful prep work

  • @roycoolguy
    @roycoolguy หลายเดือนก่อน

    Good job

  • @I-TILE
    @I-TILE หลายเดือนก่อน

    I like this mosaic pattern

    • @zappworxtiles
      @zappworxtiles หลายเดือนก่อน

      I like them as well…can be tricky.

  • @I-TILE
    @I-TILE หลายเดือนก่อน

    Nice technique using those levels

    • @zappworxtiles
      @zappworxtiles หลายเดือนก่อน

      Thanks brother

  • @I-TILE
    @I-TILE หลายเดือนก่อน

    nice curbless shower

    • @zappworxtiles
      @zappworxtiles หลายเดือนก่อน

      Thanks bro can’t wait to see your next project.

  • @ritapico686
    @ritapico686 หลายเดือนก่อน

    Outstanding work! Thank you for sharing.

    • @zappworxtiles
      @zappworxtiles หลายเดือนก่อน

      Thank you! Cheers! Means a lot to help people with future projects.

  • @zappworxtiles
    @zappworxtiles หลายเดือนก่อน

    Help grow my channel please like share and subscribe.

  • @Bud-vd2xd
    @Bud-vd2xd หลายเดือนก่อน

    top work, enjoyed watching that, you make it look so easy

    • @zappworxtiles
      @zappworxtiles หลายเดือนก่อน

      Thank you for your kind words it means a lot to me. Many thanks my friend.

  • @anthonygolding9830
    @anthonygolding9830 หลายเดือนก่อน

    Mate use clips rookie

  • @KManXPressTheU
    @KManXPressTheU 2 หลายเดือนก่อน

    Bad Boy with A Pretty Face!

  • @KManXPressTheU
    @KManXPressTheU 2 หลายเดือนก่อน

    PRETTY FACE !

  • @marciaprezioso7054
    @marciaprezioso7054 3 หลายเดือนก่อน

    I had one of those too!❤😊

  • @randy-mw5dq
    @randy-mw5dq 3 หลายเดือนก่อน

    Let him roll in the dirt he's having fun

  • @KeithCurtis-hz6bm
    @KeithCurtis-hz6bm 3 หลายเดือนก่อน

    Your not gonna need clips when there stacked but let me see you do this with a cheap tile and on a stagger not happening

    • @zappworxtiles
      @zappworxtiles 3 หลายเดือนก่อน

      Hello did you base your theory on one video that you seen? I hate to tell you this but maybe you should checkout my other video on basement bath tile gauge staggered…just to prove you wrong. Also like to see your work but you have nothing posted. Is there a website I can goto?

    • @KeithCurtis-hz6bm
      @KeithCurtis-hz6bm 3 หลายเดือนก่อน

      I’m telling you some cheap floor and decor tile on a third is not being done without clips I’m teliing you Im not new to this I’m true to this💯

    • @KeithCurtis-hz6bm
      @KeithCurtis-hz6bm 3 หลายเดือนก่อน

      And definitely not on a half. Most of us don’t have the luxury of picking decent quality.

    • @KeithCurtis-hz6bm
      @KeithCurtis-hz6bm 3 หลายเดือนก่อน

      You also do a buildup which is frowned open. There’s no way to insure the air is escaping the tile you lay with spotting or puddying

    • @KeithCurtis-hz6bm
      @KeithCurtis-hz6bm 3 หลายเดือนก่อน

      Your tile is literally goes against tcna

  • @leobender
    @leobender 4 หลายเดือนก่อน

    Amazing work, thank you for sharing.

    • @zappworxtiles
      @zappworxtiles 4 หลายเดือนก่อน

      Many thanks!

  • @brianherald5756
    @brianherald5756 4 หลายเดือนก่อน

    Don’t you have a lot of waste doing it that way,does it really look that much better

    • @zappworxtiles
      @zappworxtiles 4 หลายเดือนก่อน

      It’s not about waste I actually always have enough tiles then some. Save your off cuts, never toss them till the end of the job I work with builders, client’s and high end designers.

  • @abbiemcgee3156
    @abbiemcgee3156 4 หลายเดือนก่อน

    Good to know there is never a squared room. And I like that you talk over your video, not while you’re working.

    • @zappworxtiles
      @zappworxtiles 4 หลายเดือนก่อน

      Thank you for the kind words. I am happy to teach you some simple techniques.

  • @abbiemcgee3156
    @abbiemcgee3156 4 หลายเดือนก่อน

    I just watched another video by a different guy, and he started in the back. His cut tile was right at the door. Totally agree with you. Full tile at the door. 👍🏻

  • @abbiemcgee3156
    @abbiemcgee3156 4 หลายเดือนก่อน

    I can tell you’re good at what you do. Laying small tile like that shows even the smallest mistakes.

  • @abbiemcgee3156
    @abbiemcgee3156 4 หลายเดือนก่อน

    Love the pattern. Great idea!

  • @abbiemcgee3156
    @abbiemcgee3156 4 หลายเดือนก่อน

    Love the bench!

  • @abbiemcgee3156
    @abbiemcgee3156 4 หลายเดือนก่อน

    What kind of drain is this? Like it.

    • @zappworxtiles
      @zappworxtiles 4 หลายเดือนก่อน

      Hello it’s called a Schluter linear drain