วีดีโอ

@@Roweos Have not tested yet.

@@ukpracticalshootingamateur I would appreciate it if you let me know when you try it.

The barrel on this model is already drilled for pins.

@@ukpracticalshootingamateur Oh? Whats your serial number? I has a front sight post fitted to my Tippmann and I needed to get it drilled and pinned as the fake gas block was only clamped on. Or so I recall anyway!

I have the classic too btw.

@FilthyHunWeasel When you remove the polymer front section with the bayonet lug on it you will see the fitting.

@@ukpracticalshootingamateur I have, that’s what I’m saying, I had a front sight post fitted to my classic in 2019 and I needed to have the barrel drilled to pin the FSP. I was originally curious if you did the same or got a clamp on one but now I’m curious if they changed the barrel at some point to be pre drilled?

This model is no longer made, you can only buy these used.

Yes, here: tippmannarms.com/firearms/m4-22-rifles/m4-22-wmr-magnum/

The tab is for use with other brands of magazine, and is held in place by way of the O ring.

Glad you like it, cool and functional, and limited edition, lol!

@shootingsuppliesltd Thanks! Do you fancy sending me a Tippmann speed loader to review, my thumbs are killing me, 😆

@@ukpracticalshootingamateur Sure, we'll be in touch.

Thank you AE, not bad for a 22 eh!

@@ukpracticalshootingamateur No it looks very similar to my .223 M4. I think you did s great job kitting it out and a good job on your video too.

It all depends on your own circumstances and requirements for firearms, mental health, criminal record, club membership etc, just be honest and dont dare attempt to lie, you will get caught out and NEVER get licensed.

Your welcome, hope it was helpful..

@@ukpracticalshootingamateur YES VERY HELPFUL NICE ONE KEEP BE READY

@@JBinthesticks Im not trying to shock anyone, its just an informative video for other nations and new would-be shooters.

Thank you, glad you liked it!

Many thanks!

It comes with the plastic case as shown.

I think you may need this video: th-cam.com/video/FgTALMpuzJ4/w-d-xo.html

Hello Rick and thanks for your question. Firstly the .22 is the only semi-auto calibre we are allowed, bigger bores need to be straight-pull / single shot. In the UK we are allowed all calibres of rifle providing we can show good reason for owning such a weapon, I am allowed this specific rifle because I have demonstrated a need for it in Practical Shooting. I am a member of a Home Office approved shooting club who have cleared me for safe handling of this type of gun. My Firearms Enquiries Officer (FEO) has checked this with my club, I have also undergone deep criminality and mental heath checks to ensure I am as safe a gun owner as possible, my gun safe has also undergone tests by my FEO for security. In the UK we need to renew out certificates (SGC / FAC) every 5 years with a fresh indepth doctors mental healthcheck. To sum up, Brits must prove they are of sound mind with no criminal record and good reason to hold each gun we want to apply for before the FEO will even interview us, when this is when we discuss our need for each gun, we are also limited to amounts of ammo we can hold. I hope this answers your question, thanks for watching!

Yep, it sure felt odd!

What else is needed for it to be milspec ? Thanks in advance !

I dont see why not.

Unfortunately you cant get a shotgun speedloader that works like a .22 speedloader, so this is the only next best thing, its certainly speedier than loading with your bare fingers!

Abim gerek yok buna be böyle daha çok zahmet

@@ismailartan5197 I disagree

Is it size Small (S).

A cup? Not painful at all, thats the whole point of the loader, if you have a mag fed shotgun you would know that...

Interesting, let me know how you get on..

Never shot an Armsan. I only had 1 or 2 jams due to low brass shells, this is why I stick with Gamebore Evo, medium brass, they cycle flawlessly, but the gun must be run in on a slab of 32gm loads first with the gas piston on Heavy setting.

This one, of which I have 5 available for sale: th-cam.com/video/8hSQShoYRTY/w-d-xo.html

Approx 1000 hours

Happy days! An F12 it is then!! Got a few Sighmarks left if interested, £90.00.

You can only get a muzzle brake.

Sure, add your email address and I will message you and then delete it from here.

Ive had my F12 for about 5 months, it is fantastic, and I certainly recommend buying one!

What red dot you running on that f12

You can find it easily on Ebay

I broke it in with a slab of Fiocchi Pigeon 32 Gram size 6 (high brass), then I reveresed the gas piston and now run it on Gamebore Evo Competition Load (medium brass) - 28gms - 70mm - 7.5 with no issues. It seems that low brass shells can cause issues.

Thank you so much for the feedback. Will do the same.

@@icarus_1541 Let me know how you get on, as it helps other F12 owners.

@@ukpracticalshootingamateur will do. Thanks again.

Umarex may own Walther, but its still a Walther made product, a bit like Hersheys owning Cadbury, lol! The stock that I have added is a nice snug fit with minimal play.

Yeah I soon realised that, dont see the point of including it to be honest as not very effective. Thanks for watching.

@@ukpracticalshootingamateur yeah they don’t do much - but do look alright on the end 😂- thinking about getting a typhoon as a nice looking shotgun - I like the drum mags you can get as well

I have no need for a magnifier as only shooting about 10yds on practical range.

Cheers Henry! I know how reliable the Tippmanns are, Ive been using a friends Classic (now mine) for almost 4 years with just a couple of jams during the first few uses, and have been shooting the clubs Elite S too, it has a good balance weight to it, stay tuned ;-)

Its actually very well built and solid. Its the top end of the EXPS3 clone line.

then an authentic eotech would look cheap to you guy

Im sure they are just for slight tolerances in barrel diameter.

Thanks for the tip, its in the post!

Hello Matt, nice to hear from you! The HK shot really well as expected but the Sight was initially way out, wasnt hitting anything and everyone was having a laugh, then Michelle rescued me! Still needs a little fine tuning on the Sight. Look forward to shooting with you again soon my friend, have a great Xmas Matt!