วีดีโอ

Harris Kimberly Garcia Barbara Young Jessica

This is amazing, im gonna build this exact desk and im glad i came across this video. Would you be able to let me know what screws and Screwdrivers u used for this?

I have 3 of these and the microphone doesn't seem to work on 2 of them. Any ideas what to check? I have checked the Windows settings and selected the KH122M Dongle but still does not work

Thanks, another fan fixed instead of replaced!

Great video. Installed mine today. The feed water adapter and needle valve keeps leaking. Maybe I'll have to add more teflon tape or I might have the sleeve for the compression nut on wrong.

Hello everyone and thanks for the very useful video..I add that after replacing the pads you must check the brake fluid reservoir. You have to do this because when you replace the old pads with the new ones the level of the fluid in the reservoir rises above the maximum, so you have to suck out a little bit of it with a syringe.Bring the level back below the max line and put the fluid in a container so if you need to add more later, it's there. When reassembling the front piston, push it in by hand, leaving the brake fluid reservoir open. Do the same thing with the rear brakes, open reservoir cap and rotate the piston clockwise with simple pliers. I hope I have also given my useful contribution.

Adding my thanks! I finally ended up needing needlenose pliers to help me get the light fixture wire connectors apart; I wasn't sure which was the male end/female end. In hindsight it is discernible from the video, but I couldn't tell.

You are turning clockwise to unscrew - I'm assuming you are in the US. Is it opposite for Australia? Legit question.

I went through the process but once I select recovery mode it goes to the Google logo and stays there. If I select the power and volume up button while it's there it will show the battery full indicator then turn off. That's about all it will do though.

Chris, you did a fantastic job showing how this system is installed. Great camera work, too. You even showed a leak so we knew it was a possibility and not a myth! Excellent! Thank you!

Hello, when you installed the RO system, does that mean your regular faucet is only for hot water?

I noticed you put the first stage filter in the wrong location. Other than that; great video.

This guy went out & bought everything new for the video 😂

What is the maximum seat height of this chair?

Would love to know if I can change the light on these headlights?? Put in brand new Duracell batteries and it still does NOT light up!!

He says the lights sync to the music but never bothers to show how well it syncs which is the only thing I’m looking for

What size is this one on your door, looks nice thank you for sharing

Did you push in and twist for the connector?

Great Directions Easy To Fallow. Thanks For Saving Me Alot Of $$. I Did It Myself

Thank you. Thank you very much. Your video supplied me with relevant information with which to make my purchasing decision.

Perfect video showed how to use, talk with like or no, why it's useful, lovely! 👏👏👏Thank you 👌

Thanks

Thanks for the video. Does the 3.5mm x 1.35mm adapter get hot when pushgin 65 watts or more? I don't think those small adapters like that are meant to handle much that much power. Thanks.

What brand did you original have on there 7 years ago?

Hi! You should make a Playlist of this tank. Thanks!

Can you cut it

Man you just saved me a ton of grief. It did not know this part could be ordered individually.

I Hope you realize bud that you’ve actually put the pp sediment (#1 ) in the stage 3 and the second carbon (#3) in the first stage. Reversed!!!

I could not unscrew the plastic piece that allows for the telescoping rod to go up and down. It does not unscrew using the fingertips as shown in the video. Even with vice grips I was not able to loosen it. Any tips to getting this feature to work?

Durability of the paste depends on so many factors. They changed over the years drastically. I've re-pasted hundreds of PCs during my career and there were extreme cases, where I was afraid of breaking the socket on a Pentium 4 because it was stuck to the cooler. After I was able to separate them, I needed to use hard spudger to take the big flakes off the CPU. Owner said, the PC was 3 years old. It was overheating like hell, because owner kept it in very dusty room (cooler fins were totally blocked). CPU hit 100C after 2 seconds of load. After cleaning and re-pasting it went down to 60C under full load. On the other hand I've seen some 5-7 year old PCs that still had the paste in perfect condition. I always re-paste a PC that I didn't build myself and owner doesn't remember when it was last serviced. I also re-paste rendering machines or other heavy load ones at the company I work for once every 18 months, just to be on the safe side, because those PCs can work for 2-3 days at a time at 100% load and any unplanned downtime costs money. Normal PCs maybe once in 3 years if I don't know the brand of paste used.

My PC has never re-pasted for 8 years now. But in the temp room 27-28 Celsius the idle temp is 40-50 and in gaming,g it was 70-75 but overall it looks very fine lol My plan is I will re-pasted this boy after I complete my new build and I'm gonna use Graphene pad for my new PC. But I was very happy when I saw that cleanup... It was easier than I thought 😂

Can confirm that same brand of thermal paste was still pasty at 10 years

Get yours here: amzn.to/3WiabSM

I got a small yellow and black stem that goes inside one of the tubes but I don't know which lol

Usually how many years before a thermal paste expires? And how to tell if it is expired any pc experts can help?

Most effective, reliable and less scary way to apply thermal paste is to spread it yourself before applying cooling. I don't understand why people risk their processors by using other risky methods of thermal paste applying (like you do) if they objectively worse.

Thanks man for the video. I have a question, can you set a voltage fraction? I mean, what if I want to use it on a device that works at 19V, can I set it to 19V not 20V?

my thermal paste lasted 14 years and wasnt crusty

Why do reviewers not show it in action so we can see the end result?

How do you keep your bottle cold so by the time your lunch break comes up You can drink it cold. I would like a meal replacment for work.

Do you know how big the size difference in between each step is? I think this is a great tool and I'd love to get one. Is it possible to dial in espresso easily with it is my big question.

It might be helpful showing which filter goes into 1st 2nd and 3rd stage.

I liked your video but I did not find it informative. I bought this same oven December 2022. At the time of purchase, this was a poorly designed item. I'll tell you why. The interior walls of the oven flexed to the point that, when cooking food, the tray and food would slip off the side supports and fall to the bottom of a very hot oven. I brought this to the attention of Toshiba (Midea) and was refunded my entire purchase amount and was told to discard the oven. I did not discard the item right away thinking I could somehow work around the issue. But, after several weeks, I was tired of having to deal with the issue. I noticed, after my contact with Toshiba (Midea), they were no longer selling this oven on Amazon. At the time of purchase, I was not aware of the issue, but I eventually decided to read the other reviews on this oven and sure enough several others experienced the same issue. I am pretty sure I was not the only one to contact Toshiba (Midea) about the problem. Your review, I felt was incomplete, because you did an "unboxing", and did not actually use the oven in a demonstration. Toshiba has come out with a Rotisserie version of this oven. I just purchased it and hope it is better than this model you reviewed. Cheers!

This video has helped me descale twice (this year and last). Thank you!

Thank you for creating this how-to-video. I didn't want to purchase a new ceiling fan and now I know I can fix the pull chain problem instead.

Good work thank you.

Why did he call the 3rd stage the first stage?

No matter how many years have passed, this is still beneficial to anyone who is trying to fix their ceiling fan mechanism. I have at least two of them either stuck in an on position that no longer functional or the entire chain broke off from the switch. So in summer time either hot to death because it is stuck at the lowest speed or in winter time cold to death because I need to have the lights on with low speed fan on.

Thank you very much! I was able to do this successfully. Had a little trouble getting the light out but once I figured it out, pretty easy.

THANK YOU!!!! SUPER HELPFUL