- 22
- 222 625
That Car Paint Shop
เข้าร่วมเมื่อ 6 มี.ค. 2018
PS Gravity Spray Gun - Switching Setups
A bit of an over view and breakdown on the PS.Gravity Spray Gun. A how to break the gun down and how to change/switch over the Spraygun Setup.
00:00 Start
00:20 Unboxing Contents
00:58 Breaking the Gun Down and Switching Gun Setups
02:43 Final Remarks
3:42 "bloopers"
00:00 Start
00:20 Unboxing Contents
00:58 Breaking the Gun Down and Switching Gun Setups
02:43 Final Remarks
3:42 "bloopers"
มุมมอง: 82
วีดีโอ
How to Paint a Motorbike Tank (with commentary)
มุมมอง 4.8K9 หลายเดือนก่อน
A guide through on how we painted some Triumph Motorcycle Tanks (with Scallops) starting with bare metal and working up to the Scallops and Topcoat. There is a lot of information to cover so it was decided that rather than a regimented step by step, a "commentry" or "potcast" style has been adapted, where we discuss issues, different processes and thoughts as we work through each step in the pr...
Mixing Ratios for Cromax Centari 610 & 600 2k Basecoat
มุมมอง 6659 หลายเดือนก่อน
Looking at the mixing Ratios for the Centari 610 600 2k Basecoat (non-activated and activated) and the different ways of mixing . Also a quick summary of amount of coats and time between coats as well as some other technical information. carpaint.com.au carpaint.com.au/technical-data-sheet/ Thinners: XB383 (standard thinner) or XB387 (slow thinners for higher temperatures) Alternate Thinners : ...
Explaining Single Stage 2 Stage and 3 Stage Colours
มุมมอง 19210 หลายเดือนก่อน
What is the difference in a Single Stage Paint, 2-Stage and 3-Stage (layer) Pearl? Start - 00:00 Sort Film - 00:21 A Quick overview and Single Stage Colour - 00:50 2-Stage (COB) Colours - 02:10 3-Stage (tri-stage/3 layer pearls etc) - 03:08 3-Stage closer details of the difference between Pearl and Candy Colours 03:38 Can you mix all the 3- Stage Colours together - 07:40 Final Remarks - 08:29
Using The Right Colour Primer
มุมมอง 3.4K10 หลายเดือนก่อน
When choosing your colour, its important to use the right colour primer. This ensures good coverage and colour accuracy. Even when doing a spot repair or replacing a panel, using the right colour primer makes the difference.
2k Aerosol System Summary
มุมมอง 22811 หลายเดือนก่อน
2k System Process using Aerosols Start Overview 00:00 Clause 00:37 Stage 1 Bare Metal - Etching Primer Summary 01:05 Etching Primer Additional Information 01:25 Stage 2 1k Primer Summary 02:04 1k Primer Additional Information 02:56 Stage 3 Colour (top coat) Summary 03:54 Colour Additional Information 04:52 Final Stage 2k Clear Summary 06:21 2k Clear Additional Information 07:02 th-cam.com/video...
2k Clear Aerosol Summary
มุมมอง 12211 หลายเดือนก่อน
A quick summay on using 2k Clear Aerosols Start 00:00 Clause 00:02 2k Clear Summary 00:30 2k Clear Additional Information 01:08
2k Aerosol Basecoat Colour Summary
มุมมอง 6311 หลายเดือนก่อน
A summary of the Custom Made 2k Basecoat Aerosols and some helpul tips in application. Start - 00:00 Clause - 00:05 Colour Summary - 00:32 Colour additional information - 01:25
Using 1k Primer Aerosols
มุมมอง 18311 หลายเดือนก่อน
Using 1k Primer (suitable for top coating with 2k) in Aerosols Start - 00:00 Clause - 00:03 1k Primer Summary - 00:31 1k Primer additional information - 01:20
1k Etch Primer Aerosol
มุมมอง 65211 หลายเดือนก่อน
Using and applying 1k Etching Primer (Epoxy PVB) in an aerosol Times: Start - 00:00 Clause - 00:05 1k Etch Summary - 00:33 1k Etch additional information - 00:48
How to Activate 2K Spray Cans
มุมมอง 7Kปีที่แล้ว
A quick overview on activation of 2k (2 Pack) spray cans and some helpful tips. Additional Information th-cam.com/video/rQS70OvV_lg/w-d-xo.html
Cleaning A Spraygun Basics
มุมมอง 64ปีที่แล้ว
Want to know more about the basics of cleaning a Spray-gun. Click Below link th-cam.com/video/SFzJ6XDIYrA/w-d-xo.html
How To Clean A Spraygun
มุมมอง 526ปีที่แล้ว
The basics on how to clean a Spray-gun. 3 guns chosen are chosen for how they are assembled, mainly to do with the amount of seals/gadgets that have been used and not to do with quality or $$ Workquip P102G, Iwatta W400, Devilbiss Gti Pro lite Times: Start - 00:00 Table setup - 00:27 min Guns broken down - 02:18 min Cleaning a Pot - 03:37 min Cleaning a Workquip P102G (single seal) - 06:12 min ...
Bumper Touchup Using Spray Cans
มุมมอง 12Kปีที่แล้ว
How to touch up scratches on your bumper using simple techniques and colour matched spray paint. Want to know more, click link below carpaint.com.au/bumper-repair/
Ways to Pour Paint
มุมมอง 2822 ปีที่แล้ว
How to pour paint out of a tin. Sounds simple enough but we will explore different methods of pouring.
Very informative 👍🏻
Great vid . 4 me. Im thinking of doing my tank +sides . Cheers
Any design painting detailed video
thank you just the kinda vid i was looking for, i dont wanna be a proffessional painter I just wanna paint my tank
Just came across your video, really cool! Out of curiosity as I'm painting my bike, dontiu sand the clear coat in end so that you can't feel stripe layer?
Mine started to leak when push the button.Never had this before maybe failed valve.
I always wonder why cant we just touchup those scuffed spots if the area is not too big. Will repainting a bigger area helps blend in with the other panels? I worry of making a small problem into a bigger problem lol 😅
What type of paint is the dark grey?
Lovely job. Inspiring and informative. Well done.
Is this stuff exceptionally toxic?
So in theory you could intentionally get a darker shade just by switching to black primer for grey paint?
terrible video , stop talking and get to fixing the problems
audio too boomy...need better audio , otherwise very informative mate.
Great video! What a fix like that should cost?
Sorry , what PSI for the base, what PSI for the clearcoat if using a HVLP spray gun?
With the HVLP you will have to check the gun specs and recommendations via the manufacturer.
Kiwi?
Well done very impressive.
nice color combo!
Step 5. What kind of flat black is used? After I used flat black and tried to sand, it built up in clumps on the tank and sand paper.
Acrylic Lacquer Flat or Matt Black (not Enamel). Leave it to dry (normally a few minutes) before sanding otherwise it will clog. If you apply too the coat too heavy, this can cause clogging as well. Failing that, you can get powder guide coat in a spray-can.
this was exactly the info I was looking for with some legit humor snuck in there. thanks man.
Perth Western Australia , I know the paint shop I buy paint cans from these guys they make good quality paint with good full paint cans , full spray paint supply’s
Thank u
I’m getting ready to try to paint my bike I’ve been watching videos for almost 2 years now I’ve got primers paint reducer, activator sand paper clear coat, I think I’m ready, if it doesn’t look good just sand it down and try again
You put all paint want it wouldn't improve a Korea car 😂
Nice one Chad
Thank you for the instruction. It was very helpful.
2 things: 1: you have any orange peel before the clear went on, if not any tips on avoiding it? 2: how long did you wait between the base coat and the stripes?
Great job and great video. I'm a mechanic, not a painter so I've dabbled a bit and painted a couple of tanks but this will elevate my next job right up there. Thanks again Muzz
Perfect thankyou.
How long before can hardens up after activating?
It’s always best to use the can then and there. However as air is not getting into the can and If the can is kept cool, I have known people that have used it the next day with no problem( just check first to see that it’s ok… will start to splatter)But we always suggest to people to use the can right away.
👍 🏎
👍 🏎
You are far too close with the spray can
I know its a little hard to tell in the video but we are using left-handed spray cans, which as you should know, are a little different to use.
very interesting. but i have no idea what you said around 0:21
How does the engine run with the overspray in the tank? Better to mask off the tank neck
Na all good in this case and in the context of what was done. If using a 2k primer I would have been more careful but hey its a you tube video. Tank was flushed after anyway.
Very nice, thank you for sharing!
Is there a color code for the chosen colors? Really enjoy the combination!
No buffing?
Happily enough, no we didn't need to do any buffing.
Beautiful job! This video is super helpful. Thanks!
Great job
thank you for sharing the step by step. that came out very good. the stripe adds a bit of character to the total design. well done
Looks amazing! I’m pretty good on the tools but have never sprayed a tank before! It’s given me the confidence to have a stab at it! Thanks 👍🏻
This video was really helpful, I need to respray by boot lid and bumper. I will come into your store
You should do more of this videos. Not many post vids like this using spray cans.
අයියෙ අර කැට වැටෙන්න දාන ලේයර් එක ඩස්ට් එක වගෙ ගහද්දි රෆ් වෙනවා නේද.ඒක එහෙම්මම ක්ලියර් කොඩ් එක ගැහුවට කමක් නැද්ද
Лак из балончика-идиотский выбор. Такой лак облезет очень быстро
Looks very nice. I wish you would have showed us how you removed the insect for the clear coat, or from paint on the tank.
Really useful video. Thanks for posting.
Great video! You spray with such ease, confidence and smooth. That is a learned and experienced talent! So you do not sand after each final spray? I guess you don't have to as long as you are under the 1 hour time. Very well done. Do you buff it out after all has cured? Sorry for so many questions, I don't want to screw up my 1976 RD400. I can build high performance engines (shop), but I can screw up painting every time. At 68 years old you would think I should have mastered painting - not even close. Thanks
thanks for the video mate i found it supper informative
Thank you