วีดีโอ

Thanks for your advice. I usually use screws because I think it's easier to take them out if needed

the helical fixing is screwed in to the eps board and the small cut with the knife at the beginning was to cut the fibreglass mesh that is at the back of the render

Not really the building materials that you can easily find in the uk are very poor it's about 30% of what is in the Eastern european countries. And full insulated windows are covered on youtube but in a nother linguadge

th-cam.com/video/oe2u0oxHJQU/w-d-xo.htmlsi=T-O-mlaMaJw6dPQ8

@@How2Extreme this is very interesting way to build. No cavity, window in a ply box sticking out of building into external insulation. Maybe we should start building houses like this in the U.K.?

@smellypunks that guy is an architect and is building his own house from scratch and explains all about it on each stage. He also is buying materials all over Europe and explains why and the specs. Passive houses are a new way of building, and you have to be careful to the smallest detail. Hi definitely have some good videos on ewi. The frame can be bought in aluminium with insulation inside don't need to be build with timber, are an infinite way's to do ewi

Thank you mr. Phil. Im glad you are still with as ❤️❤️❤️

Always.

@philedwards482 👏👏👏

Yes.

Thanks

I filmed this about 1 year ago and i had my doubts putting it on. I think this is the best way of doing it because you can easily replace them , and yes you can stick the end caps without any problem. Let's see how much hate i will get on this clip from the window fitter's 😅😅😅

@@How2Extreme​​⁠ no hate here bud, your good guy that takes pride in his work 👍

Thank you very much. Your gist made my day better

Thanks, mate. i really appreciate your message ❤️

I'm expecting more vids too😊

@MrIR_warrior definitely every week will be one uploaded im working on them as we speak

Thank you too!

it should work with a universal one witch you can find in any plumbing shop

Sorry i don't because you can't without taking the window down but ive gist finish to edit a clip about that and is going to be released in 6 days. This is a big coincidance

@ great news thanks. Love your videos.

You are welcome, and thank you

Thanks

You welcome 🙏

Thank you .I only used 1 brand and i found myself ok with it. There are others out there my be better but this is what i use follow the link to check... www.cureit.com/

@How2Extreme thanks

@@funk1za you welcome

Glad it was helpful!

Wow, thank you very much

Definitely yes but i don't know if you can find the full system there probably the easyest way is to ad an pir insulation like a kingspan then clad on top with the planks that you usually do around there and definetly is going to be beter than this system

Thank you 😊

It will not be possible without major modifications on the pipe work

Yes, a lot of rubbish 🤣🤣🤣

Happy new year! All good i am bit busy that's why im taking longer to upload

@@How2Extreme busy playing dmz

Hey. That's not nice

@@How2Extreme its the truth my friend

No, it's not .i had a few days off, and after 8, i had a few games 😅

🤣🤣🤣

Victoria plumbing

@@How2Extreme In Australia?

Wow. I have never been there, my be some day 🤣🤣🤣

I've checked a few shops, but no one sells this toilet, not even amazon. I changed my address to Australia but had no luck 😪. Sorry

@How2Extreme thanks. Your efforts are appreciated 👏

I had a few of them done without any issues. They say that eps board it will trapp moisture in and recommend mineral wool slab because it is breathable and that is going to be a bit expensive. Definitely are different way's to insulate

Awesome, thank you!

Hi. I think it's a good idea to have a look as soon as and keep the damages at a minimum. I agree they look nice but hard to spot any problem's

Hi.im based in Essex. Depending on the job

@ I am 3 hours away but I need 2 chimney removed

@@osamabidenobama8240 A BIT FAR FROM ME

Yes I do!

More to come!

Im sory about the late response and yes i can assist you. gist send me some pictures and a phone nr. on my email

@How2Extreme hi what's your email address,

that is the dpc and its not supposed to comunicate with the top side

I never left 🤣🤣🤣🤣

You welcome

I know, and they haven't finished yet

Thanks, and im glad to see you are still around

Nu a trecut inca

thank you

Its a bit difficult while im filming , i will have take of the mask and put it back again with more dust on. That's why i'm avoiding that. Thanks for joining

Wow, thank you!

It will not be easy to do that, but i will be more careful in the future. Thanks for letting me know

No. It's an aluminium starter rail at the bottom

yes it will

@How2Extreme well not I'm my book it won't, Osb3 boards need to be bandaged not just taped, the resin actually needs to penetrate joints. No bandage to any of the trims. And no adhesive to trims drip side. Also no where near enough clouts in the trims. It won't last....

I've seen other roof's done with the bandage on all the joints, and they were cracking very loudly when expending. I am following the instructions from curit where i can

Yes. Sometimes, it will be double in the middle where the 2 breasts are fusing together

​@How2Extreme my chimney in the living room measures 1500mm wide by 500mm deep. Howeven in the attic it measures: 840mm wide by 390mm deep. Given the attic dimentions. How many brackets would you use? And would they be 50x50mm or 70x70? Thanks. The chimney in living room goes diaginally to the second floor then syraight

50x50 should be enough, but always, you need to check with building control because sometimes they will ask for a still, depending on the circumstances

@@How2Extreme just out of interest what's a still. I'm not the one doing it but I wanna make sure the builders i have booked are doing it correctly 👌

@kierenhudson6331 Sorry steel or rsj

Yes, it's not the best build but it's doing the job if it's strting. Something is definitely clogged

@How2Extreme from new ? How

I dont remember exactly the brand but you can easily find them on internet as helical fixings for ewi or eps boards. I will recomend to use the normal screws and plugs they will do a better job.

@@How2Extreme Thank you for your reply much appreciated. But what do you mean by the normal screws and plugs please can you give me an example I'm not sure what you mean do you mean the normal plastic spiral plugs that are used for plasterboard? Thank you

@Chris-uu6dg no i just mean normal screws

@How2Extreme OK, thanks, so normal wood screws. I just subscribed, by the way. Thanks 👍

@Chris-uu6dg thanks

Hi. I used adhesive and mecanical fixings for eps boards

it's always room for improvement

Try looking for external wall insulation