วีดีโอ

Thanks for this! Been devastated and upset my mower died but this was all that was wrong! The fuse was bad. To test i pulled fuse and replaced it with a wire to complete the circuit and BOOM it started. Off to get anew 20amp fuse now.

Mine was running just fine BUT no headlamps. I was troubleshooting the lamps getting some strange readings. For instance, both wires @ the headlamps = +12v, switch ON or OFF. That would explain why they not on but strange. The wires disappear above a metal plate above the battery. I shorted the switch wires = NO HELP. I tested the switch = OK. I hot wired a bulb = OK/WORKS. I had the key ON. I gave up. I suspected there may be a relay hidden somewhere above that plate but how to get to it? I put everything back. THEN, NO CLICK/NO START. I saw this vid, searched and found that fuse-BLOWN. REPLACED = cranked-started-headlamps ON. Great, BUT, HOW? WHY? !

Anyone know the name of that part?

So, there was too much dirt in there. I'm going to go try this. Stay tuned.

Thank you ended up being SAME issue! 👍🏼

Killer video, thanks for all the awesome advice! Came here via your podcast with Wade on the Shuttle Drive

So I bought mine a few days ago and it started and ran and cut fine when I bought it only thing I didn’t do was test pto which turned out to be fine I went to cut my grass yesterday and no crank no start I hooked a jump box and jumped the solenoid with screw driver and it fired any tips?

But why is the fuse blowing?

Good video and nice kayaks!

Thanks man! I’ve been using my push mower and frankly I can’t do another summer of that in the backyard. So I’m trying this out for sure!!

I have a different model mower so I didn't have the layout of parts you do but you gave me a huge clue on what to do! I got mine started because of your video, thank you

stopped by to find link to your store and website says closed, is this temporary?

Oops

I found an easy way around the safety switch. I got a new switch, unplugged the wiring harness from the old one - which I left in place - and plugged the harness into the new switch. Then I wired the bottom plunger closed, and now it works dependably every time. I no longer must depress the clutch/brake lever in order to start the engine.

Ive had the same problem with 2 different models recently. It seems to be a common problem on these Husqies....what could be the common causes of so many shorts?

Hey now you have a new battery and you figured it out without taking it to the shop

How to replace fuse on solenoid wire to fuse

Let me start mower was running in park. I walked away and it died. Nothing I checked the connections all seems ok When i jump the solinoid the mower turns over. I am at a loss.

So i cked all the connection I will ck again Batter good. If i jump the solinoid the mower turns over. I am at a loss.

So mine was running and in the middle of the yard boom just stoped running i will look at these connections next.

Husqvarna blown fuse is probably a pinched headlite wire or the wire tie down dry rots cracks off and melts the head lite wire on engine. That blows fuse and causes no start. So check the insulation on the head lite harness

Thanks! I too had just gotten a Husqavarna on the cheap and it doesn't turn over or anything and just ordered the ignition switch and also just bought new spark plugs and will try this out as soon as I can! Thanks a bunch, man! Rock on dude! #DogeDope

좋은 자료 감사합니다

Thanks ❤

Very Cool! Thank you for sharing! ☆ Jesimiel Millar

Is this in TN?

Ya'll are crazy 💪

Thanks for the simple video Same problem, but located in different location

Where dis you get that door

My Husqvarna's switch on the "clutch" pedal (must be depressed to start) is the problem. I can re-seat it and it functions normally. But it is undependable and intermittent. I wonder if the switch should be replaced? It's a 2017 24V48 with only 83 hours.

where did you purchase this item

Excellent information

Cheers

should of , could of......

I live in New England where folks wear drysuits or drytops 10 months a year. What is your opinion on cutting a neck gasket for chest compressions? Will an intact neck gasket impeding blood return increase or decrease the effectiveness of chest compressions?

Did you swim on the last drop ?

Nice shoes.

Mine is a 2019 YTH24V54, hopefully this is what's happening to mine. One day after two weeks of not being able to use it, I tried it for the heck of it and it cranked. So, I did the lawn since it was running. Then a few days later, thinking it would crank, I got on it and nothing again. I changed the ignition switch, the seat switch and charged the battery ovwr night but nothing happened. Someone suggested that the starter might be bad, but the lights don't flicker when I try to crank.

Thank you... I checked those wires a dozen times and nothing happened... Watched your video and decided to give them one more try... Bingo!... I was just getting ready to remove the starter and you saved me from that task!

Be careful or cornelison and coyly will have his revenge on you. They have wanted to for years

I always check simple stuff first. Worked great last time so I'm hoping it's easy fix. Going check fuse and solinoid connection when I get home. I put new voltage regulator on it last year. I will check that also. Turn key to nothing so I'm hoping it will fire when I get home. Thanks 🙂

I have new battery and it's not locked up. Going check fuse tonight.

This is what I'm going to try next thank you good video

Floyd, I'm not gonna watch any more of your videos if they're not in 4k.

I keep a cat TQ on my PFD belt 👌🏻

Did I miss it, or did you never give the name of the product, price, and where it can be found? I use a similar product from NRS, but it’s not as lightweight and compact as this one. I also love Kokatat’s changing pad, but it’s even bulkier and doesn’t draw up into a bag. Thx. 👍🏼

Thank you! I tested and tried everything I could think of and nothing worked for me, cleaned my solenoid connection after watching this and it worked! 🤦‍♂️ thanks for the video!

You're awesome dude 🤙🏽

Working of a friends. He put in a new battery, new starter, new solenoid. Still no go. I am going to have to pull her apart and track it down.

Good vid, love the sound of the river.