วีดีโอ

Thanks 👍

All right awesome!

Interesting. I also did a little bit of research about the gespenst and I found out that there's also a red version of it too, I've seen the upcoming hg weissritter and I like its structure but I'm not a fan of its color scheme. I really wanna get the blue gespenst mk.ll but it's expensive and hard to find since it's premium bandai, I would like to see the gespenst in red too but it'll probably release in premium bandai as well as the hg weisritter too. All in all the srw kits are awesome, thanks for watching.

Yep, I just realized that my G-shock seems to have the same color scheme as the Gespenst, just a lil bit of yellow accents will complete the look. Yes the 90's were awesome, thanks for watching.

Thanks, these are just simple mods really, it's all about being creative and making use of what materials you have. Even the reinforcing of the pegs is a known mod from builders, it's just what I noticed was that they only do it when the peg is already broken so what I did is like a preventive measure. Gunpla is freedom so try experimenting with your builds and have fun with it, you'll eventually master it.

Good question, my ring is a bit of a mystery actually. I found and bought this ring from a japanese antique thrift store and I believe it's a custom made jewelry from japan. It's made of 950 sterling silver and under the ring there's kanji words engraved "幸運" which means "good luck". I call this ring the Ring Of Luck.

@@Rock-On-Ron I see. It reminded me of the time ring from Dragonball Super. That’s a badass ring tho love it 🔥

@@myaoyorozu2512 Ah yes I remember the time ring from Dragonball and it does look a bit similar. Thanks😊

That's awesome man, getting this model of Albion still in box for only $25 is a nice and lucky find. I wanna get the other ships too, I saw some online for sale but they're expensive. If I find some for only $25 then I'll absolutely buy it.

Yes most of the parts are a bit loose, and yes it can be fixed with just adding washers or spacers in between the loose parts. If you've watched the whole video, what I did was I cut some DIY washers from a PET plastic or plastic bottles, it worked and that's what I suggest for those loose parts. I also suggest you put just a little bit of threadlocker glue in the screws especially on the tie rods and turnbuckles and also on the screws of the metal gearbox. Mine still runs fine with the metal upgrades, goodluck with your build. 👍

Thanks, my g-shock is a custom "GW-9400-1 Rangeman" it has a custom bezel with gorilla glass, 4 red crystals and a titanium bullbar. The strap is a custom carbon fiber nato strap that I reinforced with parts from other watch straps and it also has a physical compass.

@@Rock-On-Ron really nice!! Thanks for you response, greetings from Mexico

I actually know about the chassis angle and the front and back differentials themselves were identical, the only parts I know of that looks similar but different was the front and back swing arms, shock towers and the gearbox bracket attachments, so what about it? I was able to assemble the car with the metal upgrades with no issues and it's running fine so what's the problem?

Well if that's what they said, then they could be giving you a lowkey hint that the t-mobile account and that bpo company itself is so toxic that it's deadly, and what they said hoping that you'll get there alive means for you to simply pass the training and be able to handle the account. lol, just kidding. I don't mean to discourage and to be honest with you what I can say is that most telco accounts are toxic and I can say by experience that t-mobile is one of them, but still it's worth a try and it's a good training ground for you to get a lot of bpo work experience also it's known that the the t-mobile account has a lot of incentives if you can handle their metrics. I say just have faith, stay focused and good luck with you to pass the training. Best wishes and thank you for watching.

The best link I can find for the accessories is this: www.umkytoys.co.uk/shop/army-toys/army-speedboat-for-kids-military-speedboat/ or you can google lens search the image to get better results. Thanks for watching

Well it's ok to not take things too seriously on this field of work, a good laugh can take the stress away. Thanks for watching. 😄

Those caps or shock guards are just a plastic bottle cap that I sliced crosswise to divide into four pieces, then I drilled a hole to fit the shock screws and there you have it. It's a free easy mod actually, you can use a plastic bottle cap from a 1.5 - 2 liter coke plastic bottle or any plastic bottle cap that you can find that would fit. Thanks for watching.

Yep I know that, but so far I've had no damages with the car or the metal upgrades since day one. I don't really do stunts like high jumps and I've had some minor crashes but the car with the metal upgrade are still intact, also thanks to my custom bumper that prevented major damages. It's all good so far.

I bought those mini figures from China thru Shopee, they're affordable 100 pcs of 13mm or 1/144 scale figures for $3 per set. here's the link: shopee.ph/ALMA-100pcs-Kids-Toys-Model-Building-Passengers-1-100-1-150-1-75-1-50-Scale-Train-Scenery-People-Figures-Dollhouse-Decorations-Mixed-Color-Pose-ABS-Material-Hot-DIY-Character-i.460958943.17824786302

Thanks, turns out this ship is easy to detail with just black panel linings and flat top coat and it looked good, I actually have a spare one of this ship that I'm planning to paint in a star wars color scheme and I'll vlog about it next time. Thanks for watching.

The majority of the metal parts are made of machined aluminum except the gears, cvd and the central driveshaft I think were made of reinforced steel, also the metal gearbox I think is made of diecast pot metal. Thanks for watching.

Thanks, i know years ago i ordered some metal turn buckles for a wl959 and they were heavy metal...Anyway your car looks great..i have a v8 brushless version of this car on the way..its currently the fastest 12th scale buggy on 2s out there..thanks for sharing

Thanks! I just drilled a simple hole at the back and now it can tow trailers. I wish I could do more modifications on it, that'll be awesome.

Thanks man, the shock guards is just a plastic bottle cap that I sliced crosswise to divide into four pieces, then I drilled a hole to fit the shock screws and there you have it. It's a free easy upgrade actually, you can use a plastic bottle cap from a 1.5 - 2 liter coke plastic bottle or any plastic bottle cap that you can find that would fit. Thanks for watching.

@@Rock-On-Ron You’re a genius! Thanks man! 😎

Alright

Yes indeed, actually I also have the HG MLRS GP02A and the HG GP Rase Two Ten GP02A, which I'm planning to review in my future videos. I hope once the RG version of the GP02A is released, it'll be a solid kit and I hope it will also have ratchet joints to handle the weight of the heavy weapons with the shoulder boosters. Also I think instead of attaching the boosters on the shoulders I hope they renovate a new attachment of the boosters to the back pack instead. That'll be awesome.

While the RG RX-78 2.0 looks amazing and GP01 has been great, GP01Fb shown RG tech isnt quite ready for chockers like GP02. I also prefer HG because the build potential is much higher (I barely get my GP01 off the ground so to speak)

I got the aircraft carrier as gift from a friend in Japan, I don't have the box and all it says at the bottom of the ship is that it's made in japan. There are similar models of this ship under two brands, namely "Motormax" and "Redbox" which were released way back 1998. I guess and think it's most likely that the brand of this ship is Redbox. Thanks for watching.

Ukuran roda y berapa??

maaf terlambat membalas ukuran roda 65mm dengan hub hex 12mm, terima kasih sudah menonton

Good question and yes I also have the same issue, though mine is not too loose. I mean the metal gearbox that I had is loose but it is just minimal that it didn't really affect the drivetrain or the car while it's running. Also what I found out when I first bought the 2 sets of metal gearbox was that the one pair is loose and the other one is tight, so what I did was I swapped the upper and lower part of the two pairs of gearbox to equally distribute its looseness which resulted the front and back gearbox to have minimal looseness. Also I used a thick automotive gear grease on the diffs bearings and inside the metal gearbox and it also minimized the looseness. With that being said, In my theory I think these metal gearbox parts is not consistent in quality, you may get it loose or just a bit loose. Also I think the production process of these metal gearbox is not machined meaning it's manual similar to the manual casting production of pots and pans, that's why it's not consistent in quality. So once again my tip is you may swap the upper and lower part of the 2 metal gearbox, use a thick automotive grease and you may sand off some surface of the metal gearbox to make it tight or at least minimized the looseness, that's what I did on mine and so far no issues with it. Good luck on your build,

Those mini diecast cars are a mix of different brands namely: Tomica, Kyosho, Navi Dydo, Hotwheels, Matchbox, and Micro machines. their scale ranges from 1/100 to 1/144. I bought most of them shipped from Japan.

Thanks man, I 'm glad you liked it. Yes I'd like to make more diy projects for gunplas, more power to the hobby. 👍

@@Rock-On-Ron, spot on!

No problem, here's the links my friend. these items are from aliexpress. Bumper - www.aliexpress.us/item/3256805615627137.html?spm=a2g0o.productlist.main. Lights - www.aliexpress.us/item/3256805795625034.html?spm=a2g0o.productlist.main. Wheels - www.aliexpress.us/item/3256805687231939.html?spm=a2g0o.productlist.main.

Dear Sir, you are the man! 🫡 Lol

@@Ohh_Is_That_Sooo... yes sir you the man 😄

I'm still using the same stock shocks but I changed the springs, the springs I used are for 1/10 rc truck. here's the product link from Aliexpress www.aliexpress.us/item/3256806244048105.html?spm=a2g0o.productlist.similar_items. Thanks for watching

@Rock-On-Ron brilliant thank you for getting back to me :)

Alright alright 👍

Their scale size is 1/400 and they're made of soft rubber or vinyl.

Yes indeed it's an awesome ship, I don't usually rotate the wings and mine is still tight though, copy that thanks for the tip. 👍

Awesome, goodluck selling yours or you can hold on to it and see the value further increase. it's all good 😄👍

You mean the intro song? honestly I don't know either, but I do have a friend that knows the artist personally and they sent me the mp3 file and they allowed me to use it.

I see. Well actually these sets are meant to be played with, it's just that the mini figures can get easily lost if not well kept and I lost some too. The ship figure itself is durable and made to last.

Hmmm I think I'll pick..

Yeah man I guess it's Ben 10 hero time, my omnitrix is a custom G-shock GW9400 Rangeman. 👽

It's custom-made cnc machined aluminum given by a friend. It's not available for sale anywhere but you can achieve the same look by simply spray painting your plastic side guards with silver metallic spray paint. :)

@Azraelthanatos Yes actually I have that kit, to be specific it's the 1/144 "Ms Figure 01" from the builders parts hd. The crew set is colored light grey and needs painting, I'll plan to vlog about it in my future vids. :)

nah, i thougt that were gp02 by solomont (3rd company) at first.

@@quanganhnguyen6349 Yep this is just the hg gp02, but this hg is a solid build too. Also I've heard the solomon hg has some issues as well being third party, I'm interested to see how bandai will remake the mg 2.0 of gp02 maybe ver ka. or better yet a PG gp02

@@quanganhnguyen6349 also check out the review of the solomon gp02 from this channel th-cam.com/video/4OeL8EyKBzM/w-d-xo.htmlsi=Jf0C8r5z8jpKYy5D you'll see the solomon gpo2 has frame issues being loose and the plastics seems brittle, looks good aesthetically but not as a whole kit.

@michagamza Tak, łożyska są trochę luźne po zamontowaniu na metalowych piastach typu C. Zestaw metalowych ulepszeń, który kupiłem, zawiera łożyska tego samego rozmiaru co standardowe, i umieściłem 2 łożyska na piastę, aby zapewnić szczelność. lub jeśli znajdziesz przekładkę tego samego rozmiaru co łożyska, możesz ich użyć, przyjacielu. Jeśli nadal jest luźny, możesz spróbować użyć kleju Loctite do umieszczenia łożyska w piaście, ale uważaj, aby nie umieścić kleju wewnątrz mechanizmu łożyska. Dziękuję za obejrzenie mojego przyjaciela.

@@Rock-On-Ron dzięki właśnie dałem za dużo kleju właśnie i teraz muszę wszystko wyczyścić w acetonie chyba to puści klejem do opon to kleiłem 🫠👨‍🔧🤦🏻‍♂️

Thanks for watching 👍

@ucitymetalhead Thanks man, yep actually that's a bronze sharpie pen but gold will look awesome too. Just in case if you're going to paint yours too with a gold sharpie pen, I suggest you finish it off wit a clear topcoat just found out the sharpie pen can easily be removed with a scratch. Those weapons are just from a cheap plastic toy for 3.75 figures and is quite hard to find and I liked how it fits the tank.

@@Rock-On-Ron yeah I didn't have any luck finding it on aliexpress or Banggood unfortunately cause it makes a way better weapon than the thing I took from a marvel legends figure. Yeah I seen that problem with the paint too especially when you crash as much as I do.

@@Rock-On-Ron i think I put up a short video of the stuff I did to mine if you want to see.

@@ucitymetalhead yep I've seen yours, nice custom, kinda rough but it works. awesome

@@Rock-On-Ron yeah it's definitely a prototype that i kinda had to problem solve on.

@jjami14 The GT1 Toyota dealer music is one of my favorites, GT1 is awesome. Thanks so much for watching mate! :)

I see what you mean, from the time stamp 0:11 to 0:15 and 5:55 to 6:05, I was indeed able to install the silver metal shock tower to the metal gear box, and the screw that I used are the ones that came with the metal upgrade set are compatible, the screw sizes and screw holes diameters on the metal upgrades and gearbox set that I bought is the same size as the stock ones, it's just that some of the screws included with the metal upgrade set are shorter in length. so I ended up using mostly the stock screws with the car. You can actually install the metal shock towers to the metal gear box without modifying it, but it's my personal preference to use the stock metal tower because I'm worried about the screws bending and I don't have a drill or a dremel as of the moment so I'm not able to fully show and explain what needs to be modified at that time. I haven't installed the metal pinion and the metal geared driveshaft yet since the stock ones are still working fine, I will use them once I upgrade the motor. What I'm thinking was that there are variants of this metal upgrade set that has either compatible or incompatible screws and hole sizes, and some of the online seller's description of the item is inaccurate so I don't know about the set that you got but mine is compatible. I wish I could still find the link of this set from shopee or lazada, If I do I'll post the link here. Welcome po, thanks.

here's the link www.alibaba.com/product-detail/Wltoys-Remote-Control-Car-Parts-Metal_1600243034980.html?spm=a2700.galleryofferlist.normal_offer.d_image.649b52697Nh3nq

you can order the set on shopee.com or alibaba or aliexpress.com, just type in "wltoys 124019 metal upgrades" on the product search and you'll see it. sorry I can't post the link here my friend.

Thanks man, been busy nowadays but yes, glad you like it. alright, thanks for watching 😄