วีดีโอ

Thanks, 7 years ago but this little xs650 still goes hard ;)

For how it looks... I would prefer a little more rumble. Good sound for daily rider. But sounds too pedestrian.

Jack King 😂

Ben Clark hey ! That’s some basic motocross handlebar

Hey, unfortunately I've done my jetting 4 years ago, I don't remember what are the specs anymore sorry :/

I can't tell you, the bike wasnt running when i bought it, and the stock exhaust was rusted so it went to the trash

I think it is a 345 or 355mm (+10 or 20mm compared to stock specs for XS-SE). The idea was to close the angle of the fork for better maniability, and to have a better ground clearance.

@@philippeanglade7043 , do you remember the brand or the bike that this shocks came from ?? thx

@@alexgamboa5466 yes, they are from Shock Factory, the model is « 2 Win » I think

Thanks, it's a Daytona Velona

Nice - thanks!

It's probably just the camera lens distortion.

Chez Counterbalance cycle ;)

Philippe Anglade merci 👌

Rob Weaver It’s close to Volvic, France ;)

beautiful area, tx !

Why ? Because I'm riding alone in the twisties means that I'm responsible for other riders to crash ? Come on, try to be serious ;)

ClutchUpProductions Hi, I made the battery box

Hi, it's a 2-1 from MAC exhaust, or XS Performance, depending on where you're buying it from

Air filter is an UNI with 20° angle. Bought it on ebay I think. For the seat, go to counterbalancecycles and look at what he can do ;)

Thanks, hope you'll enjoy your ride ;)

Hi, it's a stock front fork from a XS special. Only with added dust covers.

did you lower the front forks by chance? the stance seems a bit more horizontal than on the stock.

I went the opposite way. I wanted to improve the lean angle so I bought custom made shocks, they are 15mm higher than stock

do you know the length of them? could you just buy some adjustable rear shocks from ebay and raise them a few mm?

or rather, if possible, could you tell me the final length of the shocks? were they 320mm?

Hi, yes it's clear coated, but will be painted soon ;)

I'm thinking about going with the bare metal look on mine. How did the clear coat hold up? Did it adhere fine to the bare metal? Also, what kind of clear coat did you use? Thanks for your time!

It's the same as a paint : the secret for the clear coat to hold is sanding. The paint, or the clear coat needs a "rough" area to hold. You can sand with 600 or 800 sandpaper and it will hold just fine. Or you can use an electric sander as I did, depends on the result you're expecting. I used satin clear coat used in automotive industry, but any clear coat applied by people who know what they're doing, will work just fine.

Awesome, thanks so much for the reply

Yes, mac 2-1 headpipes and a supertrapp muffler.

Merci ! C'est loin d'être propre mais au moins je me suis bien amusé !

Hi, not rephased, it has stock crankshaft and camshaft. I guess it looks smooth because I rev it a little in this vid, but otherwise you can feel the vibrations a lot

@@philippeanglade7043 I t sounds like a 447 engine stock. They are in the right hands more than adequate for today’s riding.

Thank you :)