วีดีโอ

Fustrating lol

Just bought one on sale

Clean switch no need to buy new

THANKS YOU HELP A LOT

After fighting for an hour trying to get that clip out, I watched your vid. Five minutes later it was in my hand!

Car mechanic "wrecks more than does good". Truth of the century. My old k1500 would be better if I never had took it to the quacks around here. I wouldn't let them put air in my tire now!❤

This was very helpful; however… budget a good hour to 90 minutes for this- you will cram yourself up in the firewall. Once located I just used the largest screwdriver I could fit in the space to pry between the retainer clip and the switch. Make sure you have purchased a replacement. Rotate switch up and Gently pry the switch off. There is virtually no slack in the electrical connector- gently disconnect. I ended up starting the connection with 2 hands and then just mashing one handed to make the connection. First time it made the switch come apart- just snap the two pieces with the brass clip in between back together. Get the new retainer clip started using fingers and tip of screwdriver then gently push the clip on with the driver blade. You know it’s on when there is no play between the switch and clip. From another forum- the parts house switches stink- get a backup from the dealer. I could see where old brass switch was worn and not fully engaging. New switch allows me to disengage from park. Good luck

This is the best video on how to do this. Thank you for video

Very well explained!!! Really usefull information!! Right to the chase! Thank you so much!!

Loved the video, used another one to get it down to the switch. But this one made the change easy. Definitely recommend the hooked pick and a skinny mid length flat has to hold the clip in place while you pull on the ears.

Thanks man.

Thank you sir, you were a great help to me n my suburban🙏😁

Thank you! All the other vids show the other clip!

Thanks… good effort. Just ordered the next model up from the one you demo’d. We’ll see what happens.

You got an 8.1 in that thang!!?

Suck pain in the azz. Removing lower dash, fighting with retaining clip, space, busted knuckles. 😆

Thank you! The clip on 95 GMC vandura is in a no see area (drivers side of rod) you and your video gave me the confidence boost I needed to no longer be intimidated by that little clip! Thank you!

Very helpful, thanks for sharing your knowledge

No frame removal, You the man!

Thank you! I just bought a '95 Silverado with almost 250k miles on it, and your video gave me the confidence to just knock this out myself. The brake lights work now!

You can remove steering shaft to make ez

Fast and straight to the point. Good form sir.

Anyone know if you can use "Foodsaver" bags with the Cuisinart vacuum sealer? Thanks for the video!

This is an awesome video! I must say be cautious around the steering column bracket as it’s very sharp. I attempted to get one of those clips out today and my hand slipped into the bracket. Long story short I ended up needing three stitches from it.

Today it's on sale for $67.99 at Canadian Tire here in Ottawa. The same model. ("exact same" cough, cough)

Good video. I can't believe you were able to get the clip in focus. This was the only video I found that showed the clip this clearly. Thanks.

Thank you boss. Wet means soups and sauces 😉

Muy bien! Fácil y al punto ahuevo.. gracias

Do you not need the white piece or the other black piece that comes in the pack?

Thankyou for this video

Cuantos censores de oxgeno trai la winstar 2002

I tapped my bad motor with a hammer and it started working so my fix was pretty EZ.

im strugglin, mines a 5 speed manual, really really tight up in there

How to remove door panels on a 2000 Ford windstar

Your input still helping folks 7 years later thank you much! Also found out that if the brake light switch is moved too low or high and not set back straight in L shape that can also cause to be stuck in park. And if your really in an pinch and can’t change switch, with truck off just turn key slightly forward and start ignition Should be able to override switch and change gear out of park 👍🏽 god bless

Your video sucks ass

Where can you purchase the foam sealer to replace

Nice! I just got some for my dirty max

Travis this was an awesome video. I loved all the tips. I didn’t have a cool sturdy pick like you but I used a slender long narrow chisel with the same kind of result. Thanks again - you saved me a ton of frustration 😊

Thank for the vidéo!

Thank you!

You don't need to bust those ears off. Take a small flat head screwdriver, put it in the slot and twist it. This will expand the spring clip and disengage it from the shaft. Use another flat blade behind the switch and gently pry out. It will pop off in seconds.

This is the most failing part on my truck!! I have a '95 Tahoe. This part needs replacing every 2-3 years. Why?? I buy genuine GM parts. I've taken this part apart and it's a simple mechanical contact switch but still, once it's gone bad it can't be fixed but needs replacing. And because of the most ridiculous ring clip design I have ever seen and must have been deliberately designed to discourage home fixers, (which I have learned IS a GM goal in engineering), it makes me hate my truck!

so you can use the same tool to install the new studs ?

Same thing happened to me. Took my truck to a radiator shop to replace radiator hoses replaced. My brake booster failed when I started my truck to leave radiator shop. Took it to another mechanic to have the brake booster changed. Now the brake lights and cruse control don’t work. Is that a coincidence or did the shop damage the brake light switch? I’m going to ask the shop if they will give me a break on the light switch repair. Yours is the best video on replacing the brake light switch . .

To the wires face up or down?

Thanks for the demo! Just purchased this model.

You need to put moist food in a longer bag so the juices will not go past the seal

Hey Travis, thanks for the review and how to use it. I just bought it and it has helped clean up my freezer.

Thx bro you the only one that showed me exactly the bull💩 I'm going thru 💯👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾