Specialty Outdoors: Badass Sewing for Dirt Bags
Specialty Outdoors: Badass Sewing for Dirt Bags
  • 34
  • 32 140

วีดีโอ

Testing Seam Finishes for Polartec Thermal Pro
มุมมอง 376ปีที่แล้ว
Here I test 6 different seam finished on Polartec Thermal Pro.
Zipper collar with burrito finish
มุมมอง 1.6K2 ปีที่แล้ว
In this video I show how to do a burrito finish on the inside of a collar, plus tips on adding a zipper and a collar to a base layer shirt. This video goes with the text and photo instructions in this blog post: specialtyoutdoors.com/base-layer-zip-collar-finish/ Sponsored by Discovery Fabrics discoveryfabrics.com/ where we are Sew Inspired!! groups/SewInspiredDTO
Collar and zipper hack for Jalie Marie Claude.
มุมมอง 5142 ปีที่แล้ว
How to change the Marie Claude collar so it's not a scrunchy cowl and has a zipper in the front. Here is link to burrito collar finish: specialtyoutdoors.com/base-layer-zip-collar-finish/
Adding a zipper? Here's the math to convert a pullover to a zippered item.
มุมมอง 1222 ปีที่แล้ว
Created by InShot:inshotapp.page.link/YTShare
Forget seam rippers! How to use a razor or to scalpel cut stitching apart.
มุมมอง 1.3K2 ปีที่แล้ว
I haven't owned a seam ripper in over 20 years. Here is a demonstration of how to use a scalpel and single edge razor to cut apart seams and stitching.
Replace a zipper by cutting it off
มุมมอง 4552 ปีที่แล้ว
Save lots of time by cutting off an old zipper instead of taking a coat all the way apart.
No-tape* tracing PDF Patterns onto Pellon (*almost)
มุมมอง 2.1K2 ปีที่แล้ว
This video shows an alternate method to handle PDF print out and multiple patterns. I don't tape it together into a big sheet or print/tape/cut a pattern for each size. I trace small sections at a time onto Pellon which is fast, easy to do, saves time, and stores really nicely.
Soft Waistband Tutorial part 3
มุมมอง 2913 ปีที่แล้ว
Soft Waistband Tutorial part 3
Soft waistband tutorial, part 2
มุมมอง 3073 ปีที่แล้ว
Soft waistband tutorial, part 2
Soft waistband tutorial, serger set-up
มุมมอง 1583 ปีที่แล้ว
Soft waistband tutorial, serger set-up
Soft Waistband tutorial part 1
มุมมอง 1973 ปีที่แล้ว
Soft Waistband tutorial part 1
soft active wear waistband tutorial intro
มุมมอง 3393 ปีที่แล้ว
Created by InShot:inshotapp.com/share/youtube.html
Van Shade, talking about magnets
มุมมอง 1573 ปีที่แล้ว
note: since I made this video, I did the math on purchasing magnets. it is cheaper to get them through Amazon but you may not always find the size you want.
V2 Van Shade for slider door
มุมมอง 1363 ปีที่แล้ว
V2 Van Shade for slider door
Van Shade, check fold and strap length
มุมมอง 513 ปีที่แล้ว
Van Shade, check fold and strap length
Van Shades, basting tabs
มุมมอง 563 ปีที่แล้ว
Van Shades, basting tabs
Van Shade Tutorial, introduction
มุมมอง 2223 ปีที่แล้ว
Van Shade Tutorial, introduction
binding
มุมมอง 983 ปีที่แล้ว
binding
last step
มุมมอง 293 ปีที่แล้ว
last step
Van Shades, tab pocket chain sewing
มุมมอง 553 ปีที่แล้ว
Van Shades, tab pocket chain sewing
Van Shades, cutting out
มุมมอง 583 ปีที่แล้ว
Van Shades, cutting out
Van Shade, quilting
มุมมอง 653 ปีที่แล้ว
Van Shade, quilting
Van Shades, getting started
มุมมอง 1243 ปีที่แล้ว
Van Shades, getting started
Van Shades, get ready to cut
มุมมอง 763 ปีที่แล้ว
Van Shades, get ready to cut
Make an Olson-style (center seam) facemask
มุมมอง 2874 ปีที่แล้ว
Make an Olson-style (center seam) facemask
Put a chin dart in a pleated mask
มุมมอง 3.7K4 ปีที่แล้ว
Put a chin dart in a pleated mask
Pleated fabric mask, Part 2,
มุมมอง 6164 ปีที่แล้ว
Pleated fabric mask, Part 2,
Quick and simple pleated mask w/filter pocket Part 1
มุมมอง 7K4 ปีที่แล้ว
Quick and simple pleated mask w/filter pocket Part 1
Finger Pressing
มุมมอง 1.1K4 ปีที่แล้ว
Finger Pressing

ความคิดเห็น

  • @kaybellor2284
    @kaybellor2284 12 วันที่ผ่านมา

    This is so helpful. Question: did you cut the printed pages? I have been trying to avoid cutting and could not tell if you did or not.

  • @racheyincairns
    @racheyincairns 20 วันที่ผ่านมา

    What a great idea! Consider my mind blown 🤯

  • @queeneywarren9474
    @queeneywarren9474 หลายเดือนก่อน

    Will that cut into your clothes

    • @PennySchwyn
      @PennySchwyn หลายเดือนก่อน

      once you get the hang of it, no. (in my opinion) I found I rips holes in thing much more with a regular seam ripper. Plus seam rippers get dull quick and cost more.

  • @SashaInTheCloud
    @SashaInTheCloud 2 หลายเดือนก่อน

    In case anyone is watching this over the years (because it definitely SHOULD be a demonstration every sewist eventually sees 🎉): 🩹🩸 😬 GET A SHARPS (💉🧷🪒📍📌 ) CONTAINER! You will save yourself and your trashbags a lot of stabs and holes. Not to mention all the people in waste management. They're having to deal with your trash already! Sharps containers can be disposed of in a variety of ways. Your local pharmacy, your doctor or hospital, your local government - you can search to find plenty of people and places who will SAFELY dispose of the sharps container for you, usually for free! Some places will actually exchange your container for a new empty one! Many sharps containers have a company's info on them, who will help you dispose of the sharps container. Merry Destruction! Stay safe ❤

  • @KYD.SCRUBHATS
    @KYD.SCRUBHATS 2 หลายเดือนก่อน

    Thank u a trillion times

  • @helenaglen5836
    @helenaglen5836 3 หลายเดือนก่อน

    Came across this site today and it's such a good idea so I will definitely try this one out. Thanks so much for the video. 😊

  • @Quilting4fun
    @Quilting4fun 3 หลายเดือนก่อน

    I recently heard about this method and am so happy to see it in action. What a find. This looks absolutely doable and so much easier than all that taping and trying to store those patterns. I’m definitely giving it a try. Thanks so much for taking the time to share this. 😃

  • @rhineslamprecht4675
    @rhineslamprecht4675 5 หลายเดือนก่อน

    Thank you so much. Can you show me how to do the lapped seam with this coverhem.

    • @PennySchwyn
      @PennySchwyn 4 หลายเดือนก่อน

      Do you mean a flatlock seam like you see in commercial activewear or something else? You can do a topstitched seam with this machine, but not lapped. I've experimented with it; basting, wonder tape, nothing really works. You need a true flat lock industrial ( if you are asking what I think you are asking)

  • @jmjcc5
    @jmjcc5 7 หลายเดือนก่อน

    Awesome! Thank you for sharing this information. I just found you on TH-cam through a search on how to hem ski pants. It brought up a 2018 Spokesman Review article and I clicked the links. Now I’ll bing watch the rest of your videos. I have a part time alterations business that I need some education on outdoor gear repair. Thank you again!

  • @nitanice
    @nitanice 8 หลายเดือนก่อน

    I'm just learning to sew, and I truly appreciate this. And brilliant using the sewing machine as an a vise or clamp!

  • @MF-xs2hv
    @MF-xs2hv 8 หลายเดือนก่อน

    Omg, this video was so hard to follow with the continuous fabric turning and concurrent explanation that then didn't make sense to me.

    • @PennySchwyn
      @PennySchwyn 7 หลายเดือนก่อน

      sorry that was my first one ever.

  • @Scherazade007
    @Scherazade007 9 หลายเดือนก่อน

    What model # Pellon with the grid did you use

    • @PennySchwyn
      @PennySchwyn 9 หลายเดือนก่อน

      Pellon 810 "TrueGrid"

  • @originalspicygirl5412
    @originalspicygirl5412 10 หลายเดือนก่อน

    Thank you for the demonstration .. I love how you have use the sewing machine to anchor the fabrics!

  • @andrewmcknee2343
    @andrewmcknee2343 ปีที่แล้ว

    Can you please tell me what size bias tape you are using?

    • @PennySchwyn
      @PennySchwyn ปีที่แล้ว

      It is not bias tape. It is 1" nylon grosgrain ribbon from www.owfinc.com

  • @andrewmcknee2343
    @andrewmcknee2343 ปีที่แล้ว

    Can you please tell me what size bias tape you are using?

  • @LearnMYOG
    @LearnMYOG ปีที่แล้ว

    Great demo showing ideas to improve upon a regular old 4 thread overlock construction seam. While making for fast and finished construction, the 514 overlock does leave a bit of bulk and also doesn't leave much seam allowance to hold a nice flat seam from the right side. That open overcast ( hong kong -esque) seam finish is a nice idea to reduce bulk and the cover hem makes for a faster process than having to topstitch both sides individually. For stretch, what do you think about using a single needle chain stitch as the construction seam then cover stitching for the top stitch? I'm not sure how well a chain stitch would last compared to a lock stitch.

    • @PennySchwyn
      @PennySchwyn ปีที่แล้ว

      I haven't worked with a chain stitch much. I always turn to ready to wear to see what's been done. They'll use chain stitch to seam jeans, but not stretch wear. I think your chain/cover has possibilities but always test.

  • @NancyLartey
    @NancyLartey 2 ปีที่แล้ว

    Thank you for this video. Do you have any updated tips on how to manage thick fabric/seams? I have so much trouble with my 3550 on sweatshirt fleece or thick waistbands, any help would be greatly appreciated!

  • @anastatiachristianson4914
    @anastatiachristianson4914 2 ปีที่แล้ว

    thank you! this is a very clear video and the instructions are easy to follow! thanks for sharing your expertise with us.

  • @jackiegage230
    @jackiegage230 2 ปีที่แล้ว

    This is wonderful, thank you so much! Can you tell us how you know where to mark the shoulder seam mark on the collar?

    • @PennySchwyn
      @PennySchwyn 2 ปีที่แล้ว

      Min 23. I ease the facing into place and mark the edge of the facing where it touches the shoulder seam.

  • @ruthgahlgren
    @ruthgahlgren 2 ปีที่แล้ว

    You are a great teacher.

  • @telby77
    @telby77 2 ปีที่แล้ว

    Very good technique! I am going to do this from now on. Thank you for such a good instructional video

  • @helenekiraly3510
    @helenekiraly3510 2 ปีที่แล้ว

    Very good technique specially when more than one row of stitching! To you find you have to change your blade often? Thank you!

    • @PennySchwyn
      @PennySchwyn 2 ปีที่แล้ว

      Yes, changing razorblades often is good You can tell when it gets dull. I get a box of 100 for $5 at the hardware store; lasts a very long time.

  • @manitoulinthreads5622
    @manitoulinthreads5622 2 ปีที่แล้ว

    Brilliant!

  • @helenekiraly3510
    @helenekiraly3510 2 ปีที่แล้ว

    Thank you so much for sharing this great technique! PDF patterns did discouraged me when to much pages, but not anymore! How genius this is…

  • @Karen-bj7lc
    @Karen-bj7lc 2 ปีที่แล้ว

    Thank you!

  • @gho4itnow
    @gho4itnow 2 ปีที่แล้ว

    Thank you! This almost has me convinced to start tracing my own patterns rather then sending them to be printed.

  • @lisemac6763
    @lisemac6763 2 ปีที่แล้ว

    Thanks- I am going to try this!

  • @debbys-abqnm4537
    @debbys-abqnm4537 3 ปีที่แล้ว

    I'm sure this is helpful information, but perhaps next time the camera can aim downward to completely see your hands and what you are doing with the mask. The window behind you was big and bright (but of no interest to me). I appreciate your friendly face! Also, if you made the mask originally then in this video added the darts, perhaps give viewers a link to the mask making video.

    • @PennySchwyn
      @PennySchwyn 3 ปีที่แล้ว

      Thanks for the feedback. That was one of the first ones I made, it's a learning curve.

    • @debbys-abqnm4537
      @debbys-abqnm4537 3 ปีที่แล้ว

      @@PennySchwyn -- You have a lot more courage than me! I haven't posted any videos at all (and it's likely they'd just be of local birds). I'll keep track of your channel for new uploads, because I'm sure I'll learn a lot more :)

  • @sewobsessedmama8851
    @sewobsessedmama8851 3 ปีที่แล้ว

    How do you like it after a few years? I've been debating an industrial

    • @michaelfontaine4541
      @michaelfontaine4541 3 ปีที่แล้ว

      If you can afford an industrial, that's the way to go. This machine is good, but doesn't touch an industrial.

  • @lisahook7978
    @lisahook7978 3 ปีที่แล้ว

    Are you using wooly nylon (or similar) when you serge the elastic on?

    • @PennySchwyn
      @PennySchwyn 3 ปีที่แล้ว

      Yes, but only because that is what I had in my serger for seams. I don't make a point of it; just use however machine is threaded.

  • @veloracarmack6806
    @veloracarmack6806 4 ปีที่แล้ว

    I have watched 100 videos and this is my favorite! Thanks!

  • @barbra429
    @barbra429 4 ปีที่แล้ว

    Brilliant!

  • @rawrmels
    @rawrmels 4 ปีที่แล้ว

    Thank you! I really don’t feel comfortable adding nose pieces to kids masks.

  • @tracivaughn-grutta7738
    @tracivaughn-grutta7738 4 ปีที่แล้ว

    Thank you for the video. Any chance you have measurements to make this type of a mask for children? Looking for something that would fit my 8-10 year olds.

  • @BloomByCC
    @BloomByCC 4 ปีที่แล้ว

    beautiful and simple ❤️

  • @sarahcadle5018
    @sarahcadle5018 4 ปีที่แล้ว

    When you topstitch the liner and the outer piece down the center, you direct the seem allowance towards the machine, do you go directly on top of what you just stitched, or ever so slightly to the right? I spent way too many hours on this mask fighting it but wanted to get it right because I like the design. I stumbled upon your brilliant and simple tips with my template and I’m obsessed. I feel like I won the TH-cam game of “find the right tutorial”. Yours was spot on. Sewing on a small round curve is possible! Thank you! I think using my server, and pushing the seems to the side instead of splitting them was key in saving time.

  • @jimmie200
    @jimmie200 4 ปีที่แล้ว

    Great idea. Thank you.

  • @janewashington421
    @janewashington421 4 ปีที่แล้ว

    Great! This is the best I’ve seen! And the easiest, especially for experienced sewers! You made it so simple. Thanks! I’m just starting and am going to use ties, too - my ears hurt just thinking about elastic around them all day. I didn’t want to use pins and love this!

  • @lindsays4723
    @lindsays4723 4 ปีที่แล้ว

    Thanks for this! I’ve watched about 20 videos on how to make a mask and this is my favourite. I really appreciate your “non-fussy” approach. The less pinning the better!

  • @sallyk.5227
    @sallyk.5227 4 ปีที่แล้ว

    Thank you for sharing this- have been working on increasing the time it takes for makng ties so I'll try this- been thinking in years to come these masks we are all making will be put in history museums to show the crisis of our time, the power of gracious women and men who sew and the strength of a people in times of need .

  • @shuchi72
    @shuchi72 4 ปีที่แล้ว

    very helpful thanks!

  • @linhtu2928
    @linhtu2928 4 ปีที่แล้ว

    Thanks for the video. Can you please do a video on how to add a nose and chin dart?

    • @PennySchwyn
      @PennySchwyn 4 ปีที่แล้ว

      I will put that in the next one as an extra. Should be up this week sometime.

  • @tfgraham2675
    @tfgraham2675 4 ปีที่แล้ว

    My favorite video, for sure! Measurement of fabric rectangle: 14 x 9 inches Measurement of fabric for straps: 35 x 1.5 inches; make a little snip at 12.5 inches up, to mark where to place on the mask How to finger fold end of ties: 10:10 Thanks so much for posting!

    • @shuchi72
      @shuchi72 4 ปีที่แล้ว

      yes same here....best video and easy to understand.

  • @eboneybrown8267
    @eboneybrown8267 4 ปีที่แล้ว

    Thanks so much for this video it help me out a lot! How long are you make your fabric?

    • @PennySchwyn
      @PennySchwyn 4 ปีที่แล้ว

      35". I put the bottom of the mask at 12" and the long piece on top.

  • @thedude6617
    @thedude6617 4 ปีที่แล้ว

    Very cool

  • @luvzilly
    @luvzilly 5 ปีที่แล้ว

    can i make a question please? I just got my coverstitch and on the instruction video it says that when you want to remove the fabric you just pull it towards the back and cut the needle threads. my problem is that mine hardly moves. it's too stiff to move it. is it normal because it's new?

    • @mmstudio5994
      @mmstudio5994 5 ปีที่แล้ว

      Dobrý den, Stello, měl jsem stejný problém, ale už je na chvíli propuštěn a už to není tak solidní, je to stejné jako pedál, nemohl jsem se pohybovat pomalu :) Ahoj Michaela

  • @ebbram9879
    @ebbram9879 6 ปีที่แล้ว

    Hi Penny, are you having trouble releaseing the thread on tubular double cover, mine seems to be off-set and does'nt release when i lift the lever, Elaine

    • @PennySchwyn
      @PennySchwyn 6 ปีที่แล้ว

      Try lifting the presser foot then rotating the handwheel backwards to release the thread.