วีดีโอ

Hello my friend. Do you mean that the head of the nozzle hits the object being printed? Which software do you use? Is the printer accurately calibrated?

@@Pedramstudio I tried connecting to other programs, nothing worked. I'm currently using Creality Print. Do you know what settings to change? And yes, I mean the nozzle head rubbing against the object.

If your printer is placed on a table that vibrates, this might be the cause of the problem. Before starting the print, make sure to calibrate the printer properly. Adjust the filament temperature according to the manufacturer's recommendations. Keep in mind that even filaments from the same manufacturer may not have the same printing temperature, so each filament should be set based on the information provided on its label. Try printing at a lower speed, as the filament you are using might not be suitable for high-speed printing. In the Edit section under the Extruder tab, ensure that Z-hop options are enabled and the settings are in their default state. If you are using version 5 of the software, check whether this issue also occurs with older versions. By addressing these points, the issue is likely to be resolved. If the problem persists, let me know so I can provide further assistance. Additionally, if you encounter any issues during the print process, stop it immediately to avoid damaging the printer.

Thank you very much my friend.🌹 Glad you liked the video.

Thank you very much.🌹

🌹🌹thanks

Hello my friend What is the result of printing? Is it flawless? Check if the Z Hop option is enabled in the software? And to pay attention that when you hear the sound, the z-axis motors move? Do you hear the sound at a slow print speed?

Hello🌹 I usually use 4 layers for raft. I consider the temperature for the first layer to be higher. I enter different settings for different filaments.

@Pedramstudio ok, thanks for the info 👍

@@JoshuaRilliet you're welcome my friend.

@Pedramstudio thank you for this reply ;o)

Hello, thank you very much.🌹 Of course, my friend. The settings of each model and filament are different. Which model information do you want?

@@Pedramstudio can you share pla

Hello The settings are not the same for all PLAs. But I usually print at 200 to 215 degrees. I put the temperature of the first layer higher. I adjust the printing speed for multi-color filaments slower. I slow down the walls and adjust the interior more. In general, the model and the brand of filament determine the settings.

Thank you very much for your comment, my friend.🌹

yesو of course. Which model settings do you need?

🌹

Tengo esa impresora, qué laminador usas?? Y que configuración de balsa?

@@nildur9180 Hello my friend I use the crality print app and enter different settings for each model and filament. If needed, I usually use raft or brim for the first layer.

Yeah, the fans a pretty good in that printer, overhangs print nice

Yes, it was without support and hollow .

Thanks for your comment my friend