วีดีโอ

Yes completely stock, just added a bumper and winch

Huh never payed attention to that to be honnest

@ALL_OFF-ROAD look at it and let me know if you don't mind. both of mine do

Mine is ok. I run rampcrab brass knuckles though

In the video I tried to do kind of a flex blade prototype like they do on the scx24's, ended up removing them. Im a now running no external springs, scx24 springs inside the shock, under the piston for a "full droop setup". + Rubber bands as limit straps. It works well.

They are custom. I welded tubes on the stock rubicon sliders

Its pretty narrow for the xmaxx, but it was not so bad. The small berm was making it turn on its own. If I steered It was going off the track.

Tried both. Using the remote you can select a subject on your phone screen, but this is where its prompts and say it will only track humans

@@ALL_OFF-ROAD From my chat with DJI: DJI: This for your first question - 1. Can the Neo track a slow moving vehicle? By slow, I mean less than 20 mph. DJI: I'm sorry. If you mean by track while the car moving slow. Yes it can be tracked. Me: Yes, will the Neo actively track a slow moving car? DJI: Yes So, who knows… I asked several more times for confirmation and the answer was always yes. 🤷🏻‍♂️

Lol, I chatted with a live agent and asked to add that feature, they said they will submit the request to the engineers 🤷‍♂️

@@ALL_OFF-ROAD Well, there may be hope! I don’t see a reason that it can’t from a software point of view.

I think the same, if it recognizes an object over a human, why wouldn't it track the said object 🤷‍♂️

Its not that hard. I used Posca markers for the black lines first, then used various materials as stencils from the dollar store to make the carbon/honeycomb patterns, light spray. Then fumed the front where its gray to give a darker tone to the silver paint I bought. Then removed tape where I painted red, light fume of metallic white to give the metallic effect on the red, 2 to 3 light coats of each. Let dry then finish off with white or gray everywhere. So a few tips, draw with markers on the outside of the body, on the protective film, then Cut shapes and outlines in masking tape, painting dark color first. For the splatters, I just sprayed black paint in the cap, dipped a straw in it, then blew it on the body. Back to school days 😅 I used On-point paint, rattle cans. Its intimidating, but fairly easy to do in the end. That was my first body paintjob, and its a success. Im not doing for others unfortunately. Hope that help

Yeah, but sand gets everywhere 🤦‍♂️ really needs to put on a mesh cover on all the rigs lol

Not as good as a Fusion, but still pretty decent

my two ax24s and my ryft all have upgraded brushless motors you are 100% correct once you go brushless nothing else will do 😂

The trans I bought is the RC Lion on amazon, metal housing and gears. If you wanna go brushless, id suggest a different route for simplicity. The rhino motor is not direct fit, as it has a 540 motor bolt pattern, so i had to modify the trans and fabricate a motor plate for it. Id suggest mofoRC Keg motor et dinkyRC esc. It is more expensive a bit, but would fit directly on the trans.

Yeah for a rig this size it is impressive. After running the VRD with a lot of overdrive, I will have to change the front gears in this one too. We get used to using it.

@@ALL_OFF-ROAD I used to do overdrive.. Then I realized that underdrive does the same but doesnt end up speeding up the rig. Still makes the front an overdrive by slowing the rear down and it easier on the motor :)

@@DurpVonFronz yeah im aware of that. By replacing the stock trans by a metal one it seems to be a lot slower, so overdriving the front will be fine. Also, can't find rear underdrive at an affordable price, thanks to border customs to canada and exchange rate

@@ALL_OFF-ROAD Oh nice u got a diff transmission, should be fine then :) Yea Im over here in Alberta so I know all about that nonsense. Ordered 2 things from MoFo RC and it was brutal when it went thru the border...

Thanks 👍 those injora inserts are broken in I think 🤪

I was thinking about getting Ruptures, but look is half the receipe and I am not sure. I had a set of megalithics, and in the muddy rocks like that they were useless. They were also smaller. I like bigger tires

​@@ALL_OFF-ROADI like bigger tires too , I got 108 mm Swampers on my Ecto 12 😊 cool video

Its not an apple to apple comparison, but you clearly see the difference. The injora digital is in the tan gladiator

Its already in 👍

Yep, I actually put a vr-1 receiver in my scx24 gladiator. Pretty simple. You press the bind button on the receiver, then I believe you open the transmitter, and it will sync. You then create a profile on your transmitter for the new rig, it will only saves settings like steering end points, etc for this profile. Be aware that both rigs can run at the same time if they are both powered on.

The stance is crazy nimble. I have a fusion se and megalithics in the mail, its gonna be an epic rig

@@ALL_OFF-ROAD Ooo nice, good choice for upgrades!!! :)

The S5 did not impress today 😓

Didnt run the 70's long enough to tell. But a strong 050 motor should last a long time, especially on a light rig. If thats something you are worried about you can underdrive both axles. Thats what I did on my brushless gladiator on 64mm's.

@@ALL_OFF-ROAD all I heard was don’t buy them

Yeah its pretty crazy. I want to try brass rings in the wheels and see what it can do

@@ALL_OFF-ROAD Its can only get better. What a insane rig, one of the best RTR's Ive seen.

No, its a 050 size from amazon