วีดีโอ

hmm theres a couple boards which use the ip2368 ic as you referenced (the 100w bidirectional one in greatscots video, also can be set to do lifepo4, and i used to make a cheap power station with 4x 8$ 32ah cells). there are also boards that keep to 1S config but can step up all the way to 20v now and have built in temp protection, no bms needed for 1s. personally i dont trust bms' anymore for these applications, i switched to just using perminate active balance boards, the inductive ones i think are most reliable. caps and mosfets always go bad either from age, misuse, or heat, but its pretty hard to fry an inductor if youre using it within its limits. no electrolyte to get dry/leak like caps. these boards are also much more efficient than bms', which i think allows more usable lifetime charge cycles out of a battery bank (even if one cell starts to loose capacity. it will not completely dictate the total capacity of a series config). imo theyre very beginner friendly. but so many people think you have to use a bms now days.... in my experience, most diy battery fires are from faulty bms'. the car audio world has been using balance boards instead of BMS' for awhile now coz they have a particular set of needs (ultra high ultra short C rate), thats the only other place i have seen this idea online. my 2 ev's run deleted agm batteries and in place have similar 4s 32ah lifepo4 12v batteries now, saves about 45-50lbs, and boosts range from lower parasitic 12v drain/internal resistance. lifepo4 is getting so cheap its making it not worth peoples time to refurbish old lipol cells.... large format lifepo4 cells (280ah) are like 45-50$/kwh right now lol. 18650s would have to be $0.30 each to break even with cost competition now, and cylendrical cells loose to prismatic (even lifepo4) on density because of their steel shell and shape. its a shame we dont make any lifepo4 batteries here in the US yet.

yes good advice I have shorted the cell nearly welded my side snips 😂 and I do it I keep cells and have a spot welder to rebuild tool battery packs

many laptop batterys its only one battery is broken so it shuts down the whole lot including all the good cells

You know you’re supposed to snap the end bit of the blade off when it gets dull right buddy? Usually the cap has a little notch inside of it to do it easily and safely, you can also use pliers

Merci pour le tuto. OK sur Sequoia 15.2

Thank you for this guide. I just tried it and it worked but I had a hiccup with the node not showing up after getting it installed at 1:08 and had to restart my wi-fi connection to get it to show up again. Just wanted to leave a comment if it might help anyone else.

57810 Maximillia Ways

68093 Mustafa Prairie

74055 Shields Divide

Much appreciated, trying to diagnose a faulty power button and knowing that the way in was through the glass panel was super helpful. Was about to start digging up the rubber on the back... thanks!

06130 Beier Alley

985 Marianna Loop

Thanks I'm glad it helped. I thought the same when I figured out how to make it work and decided to install a VM just to demonstrate it. Worth the effort hopefully.

This is very helpful. I had done the same thing to get it to work but it took a lot of testing and searching through different posts. Your video simple demonstrates the proper way to do it, so thank you! I just wish it could be much easier and automated!

❤❤❤❤

❤❤❤❤❤❤❤

😢😢😢😢😢

des linux craqué? mais tu racontes quoi lol linux c'est free for all 🤣

Super nouvelles, mais arrête de tourner sur ta chaise..... j'ai faillit vomir. 😂

God speed Boris 😎😎😎😎😎😎 Tu va gérer de ouf je suis trop fier 😎😎❤️❤️ God bless América 🦅🦅🦅

"Le fromage mexicain n'est pas mal du tout" 🤣 Hahaha that was the best. Aussi j'aime la chemise pikachu!

Nice formic advanced Sessions team. I’ve got two arguments and debilitate you and it takes two seconds actually four days and six hours and 12 minutes. You actually have the AI running 42 hours a day and you have it on my dad and I both at the same time and I want you to know that it’s all legal but I just want you to know that it’s not really legal with me so we’re gonna figure that out. I just want you to know that you’ve never actually asked any of us anything and you actually use hypnotism or sleep so I just want you to know you’re not gonna get away with us but yeah dude I’m probably just gonna sit here and wait to fucking figure out what I’ve been doing but since I actually told you that I’ve been falling Nuron the whole time actually gotta start acting right now but you’ve actually been seeing your unconscious this whole time as I’ve been acting it out and you’re gonna see the greatest psychic experiment ever played out as a Mass massive drop of something beautiful which has to do with my psychology and none of you have any idea what it is and you should’ve probably talk to me but yeah you aren’t gonna get it. Take care.

Cancel all codes and kill code 121

Nice greek video🇬🇷❤

I am waiting for INTERSTELLAR part 2

Name of this Ost?

its not 8k only 4k

This is stranger than 2001 a space oddessy

Very underrated, but this was just TOO GOOD

This is way underrated Can be considered as opening look

Wow great vlog 😍

kikou c'est pas léger les Carrobrics , les anciennes était moins épaisse et plus légère hihi, nickel ton travail ( une ancienne plâtrière ) kiss

Can you share the cad files?

La première phase tout le monde veut la faire mais les autres phase y'a plus grand monde