- 25
- 208 887
Model Addict
Slovakia
เข้าร่วมเมื่อ 17 ก.ค. 2022
Hello, friends! I have decided to start documenting the process of building my models. It's a unique experience compared to building models without a camera. I primarily focus on modern 1/48 scale jets, WWII aircraft, and 1/35 vehicles. If you have any advice, please leave a comment on one of my videos. And don't forget to subscribe! Your support is greatly appreciated and helps the channel grow. Thank you!
| FULLBUILD | Eduard 1/48 A6M2 Zero Type 11 IJNAF - Aircraft Model
Hello modelers! First of all, apologies for the slight clickbait.😅 It's almost a full build, except the cockpit and engine have their own video. If you haven't seen it yet, check it out-there's plenty of detail there. In this video, I'll focus on finishing Eduard's Zero. We'll go over the construction, painting, and weathering using an airbrush and oil paints. Let's go!🫡
Paints: MRP, Tamiya, Ammo Mig, Vallejo
Weathering products: Ammo Mig
If you liked the video, please don't forget to hit the like and subscribe buttons. If you have any advice, please leave a comment below. I paid for all the products I used, and the video has no paid promotion.
Instagram: ma_modeladdict
Patreon: www.patreon.com/ModelAddict
Thank you for watching.
Happy modeling.
Paints: MRP, Tamiya, Ammo Mig, Vallejo
Weathering products: Ammo Mig
If you liked the video, please don't forget to hit the like and subscribe buttons. If you have any advice, please leave a comment below. I paid for all the products I used, and the video has no paid promotion.
Instagram: ma_modeladdict
Patreon: www.patreon.com/ModelAddict
Thank you for watching.
Happy modeling.
มุมมอง: 12 801
วีดีโอ
A6M2 Zero Type 11 Cockpit & Engine | Eduard 1/48 | - Aircraft Model
มุมมอง 6K4 หลายเดือนก่อน
Hello, friends! In today's video, I'll start a new project. The legendary Japanese fighter Zero. I'll show you how I assembled the cockpit and the engine. And, of course, we won't skip the weathering. Let's do this. Paints: MRP, Tamiya, Ammo Mig, Revell, Vallejo Weathering products: Ammo Mig If you liked the video, please don't forget to hit the like and subscribe buttons. If you have any advic...
| FULLBUILD | Eduard 1/48 Spitfire Mk.Ia RAF - Aircraft Model
มุมมอง 18K6 หลายเดือนก่อน
Hello, folks! In today's video, I'll be building the Eduard Spitfire in a 1/48 scale. We'll look at the construction, painting, and weathering using an airbrush and oil paints. Paints: MRP, Tamiya, Ammo Mig, Revell Weathering products: Ammo Mig If you liked the video, please don't forget to hit the like and subscribe buttons. If you have any advice, please leave a comment below. All products us...
How to BUILD simple 1/48 scale Display Base? - Aircraft model
มุมมอง 6K8 หลายเดือนก่อน
Hello modelers! Welcome to my channel. Today, I'll take a look at building the base for my Mig-29. It's gonna be a simple concrete airstrip made from styrofoam, plywood, and cork. Paints: Tamiya, Ammo Mig, Revell Weathering products: Ammo Mig If you liked the video, please don't forget to hit the like and subscribe buttons. If you have any advice, please leave a comment below. All products used...
| FULLBUILD | GWH 1/48 MiG-29AS Slovak Air Force - Aircraft model
มุมมอง 58K9 หลายเดือนก่อน
Hello modelers! Welcome to my channel. In this video, I'll look at the construction of 1/48 scale MiG-29AS from Great Wall Hobby. This video is an excerpt from the MiG-29 project. I have a whole series dedicated to this topic on the channel. If you are interested in more details check out the videos linked in the top right corner. Paints: MRP, Tamiya, Ammo Mig, Vallejo, Revell Weathering produc...
READY for Inspection | GWH MiG-29 AS 1/48 | - Aircraft model
มุมมอง 3.6K9 หลายเดือนก่อน
Hey guys, Today, I'll upgrade landing gear with wires, build awesome Eduard Brasin R-27 and R-73 missiles, and finally finish this aircraft. If you liked the video, please don't forget to hit the like and subscribe buttons. If you have any advice, please leave a comment below. All products used I paid for myself, and there is no paid promotion in the video. Paints: MRP, Tamiya, Ammo Mig, Vallej...
Magach 6B GAL Batash 1/35 MENG | Pause between the fights | DIORAMA Final Reveal - IDF Tank Model
มุมมอง 3.3K10 หลายเดือนก่อน
Hey guys! I have another video for you. Israeli Main Battle Tank Magach 6B GAL Batash on the street. Diorama captures the pause between fights in Samaria back in the 1990s. If you liked the video, please don't forget to hit the like and subscribe buttons. If you have any advice, please leave a comment below. All products used I paid for myself, and there is no paid promotion in the video. Paint...
WEATHERING using OIL Paints | GWH MiG-29 AS 1/48 | - Aircraft model
มุมมอง 4.3K10 หลายเดือนก่อน
Hello friends! I'm back with another video! In this episode, I'm gonna look at weathering, using primarily oil paints. If you liked the video, please don't forget to hit the like and subscribe buttons. If you have any advice, please leave a comment below. All products used I paid for myself, and there is no paid promotion in the video. Weathering products: Ammo Mig Instagram: ma_m...
Merkava Mk.4M 1/35 MENG Final Reveal - IDF Tank Model
มุมมอง 4.2K11 หลายเดือนก่อน
Salom. I'd like to show you one of my earlier model builds. It's a 1/35 scale model of the Israeli main battle tank, Merkava Mk.4M, outfitted with a Trophy Active Protection System by MENG. Enjoy! If you liked the video, please don't forget to hit the like and subscribe buttons. If you have any advice, please leave a comment below. All products used I paid for myself, and there is no paid promo...
DIGITAL camo GWH 1/48 MiG-29 AS Slovak Air Force - Aircraft model
มุมมอง 5K11 หลายเดือนก่อน
Hello friends! In this episode, I'm gonna paint the Fulcrum and create the digital camo scheme using kit decals and show you how to deal with their thicknesses. It's gonna be a rough ride. If you liked the video, please don't forget to hit the like and subscribe buttons. If you have any advice, please leave a comment below. All products used I paid for myself, and there is no paid promotion in ...
GWH 1/48 MiG-29 AS Exhaust Nozzles | PAINTING / WEATHERING | - Aircraft model
มุมมอง 11Kปีที่แล้ว
Hey everyone! In this episode, I am working on the exhaust nozzles of my Fulcrum, trying to replicate their characteristic appearance. If you liked the video, please don't forget to hit the like and subscribe buttons. If you have any advice, please leave a comment below. All products used I paid for myself, and there is no paid promotion in the video. Paints: Tamiya, Ammo Mig Weathering product...
GWH 1/48 MiG-29 AS assembling the major components - Aircraft model
มุมมอง 4.6Kปีที่แล้ว
GWH 1/48 MiG-29 AS assembling the major components - Aircraft model
How to paint COCKPIT? GWH 1/48 MiG-29 AS - Aircraft model
มุมมอง 7Kปีที่แล้ว
How to paint COCKPIT? GWH 1/48 MiG-29 AS - Aircraft model
Let´s finish this! F/A - 18 A+ Hornet Academy 1/72 - Aircraft model
มุมมอง 9Kปีที่แล้ว
Let´s finish this! F/A - 18 A Hornet Academy 1/72 - Aircraft model
DIRTY Hornet Academy 1/72 F/A-18 A+ Hornet - Aircraft model
มุมมอง 11Kปีที่แล้ว
DIRTY Hornet Academy 1/72 F/A-18 A Hornet - Aircraft model
Old WEATHERED paint ACADEMY 1/72 F/A-18 A+ Hornet - Aircraft model
มุมมอง 13Kปีที่แล้ว
Old WEATHERED paint ACADEMY 1/72 F/A-18 A Hornet - Aircraft model
ACADEMY 1/72 F/A-18 A+ Hornet CUTT off the FLAPS! - Aircraft model
มุมมอง 7Kปีที่แล้ว
ACADEMY 1/72 F/A-18 A Hornet CUTT off the FLAPS! - Aircraft model
ACADEMY 1/72 F/A-18 A+ Hornet RED Devils - Aircraft model
มุมมอง 4.1Kปีที่แล้ว
ACADEMY 1/72 F/A-18 A Hornet RED Devils - Aircraft model
F-16 I Sufa KINETIC 1/48 FINAL REVEAL - Aircraft model
มุมมอง 7Kปีที่แล้ว
F-16 I Sufa KINETIC 1/48 FINAL REVEAL - Aircraft model
What % do you increase the camo patterns by?
Hi! It depends on the specific model and the instructions. In this case, I applied a scale increase of 195.3% for the top view and 112.19% for the side view. These notes are about half a year old, so I hope the information is accurate. I used a simple method: I selected a reference line on the model and the same one in the instructions, then measured them with calipers. The formula for the calculation should be Dimension from the model / Dimension from the instructions multiplied by 100.
Wow! Im wonder what did you used on piston. On the wheels support, it doesn’t look like pant
If you're referring to the chrome parts, the ones on the shock absorbers are made from self-adhesive aluminum foil, and for the door opening system of the main landing gear, I used Ammo's A-STAND chrome paint.👋 And thanks! 😊
a lot of control here! well done
Thanks!
Great work and love the avoidance of expensive products, great job
Thanks a lot. 🍻👍
Best 1/48 Zero I have seen, super realistic, no over the top weathering.
Thank you, I appreciate it. ❤️🍻🫡
Amazing work!
Thanks, man!🤙
Excellent build! Are you using 0.2mm nozzle for primer or it's different size?
Hi, in this case, I used a 0.2mm nozzle. Sometimes, however, I use a 0.3mm one. I feel I have more control over the spray with a smaller nozzle.👍
Looks amazing , really enjoyed watching it 👍
Thank you so much. 🫡
Thank you for sharing this wonderful film. Such attention to detail and captured so well with good narration. The model completed was such a great piece of artwork and real craftsmanship. I look forward to further builds and films. Best wishes to you. 😊
I appreciate your support. I'm already working on the next project and hope you'll like it. 😊
Great work!
Thanks! 🫡
Amazing job!
Thank you 👋🍻
Good Job !!!! Congrats . 🙂
Thanks, mate!☺️
Might be the bright light but it seems like you lost 90% of the pre-shading
Hi, thanks for the comment. The plan was to create a very subtle effect, something understated. Comparing it with the reference, it seems like I achieved that. 😊
I am beginning to think that people from Czechia, Slovakia and Poland are capable of modeling perfection straight out of the womb! This is a magnificent build. Thank you for displaying your brilliance in such an entertaining video presentation.
Oh, thank you for your support. I truly appreciate it. 😊🍻 I believe there are great modelers in every country, even better than me. 😅 I’m just a small fish compared to them…🫡😂
😊🎉🎉😀😁☺️🤩🤩⭐⭐😇👍🤗💯
🫡
Campions league.
Thanks!
I have a question about the Mr Surfacer 1500 's. I can never get mine to spray out of my airbrushes properly. I have them thinned to what I believe is 70/30 (Primer- levelling thinner). Anyways, this is GORGEOUS! Absolutely museum quality, no doubt.
Oh, thanks, mate! 👋 I also used to have trouble spraying paints, especially Surfacer. It's thick and heavy. I kept getting a gritty texture on the models, especially in areas where parts met at a 90-degree angle or more. I solved it by thinning the paints even more. It depends on the specific paint, but I always try to keep the consistency around that of milk and apply it in thin layers. It takes longer, but it works well for me.🤝
Wonderful, thank you! I'll thin it a bit more, because I was getting that grit as well. I've been using the Mr Surfacer 1000 in the rattle cans in the mean time, which works wonders as well! No sense in having different primers if you don't use them though!
Beautiful build indeed. I just disagree with that dirty look. The planes flown by 12th Kokutai in combat testing in China were basically brand new. Paint fading/bleaching on outside wing sections and rear fuselage (since the standard tarps covered only the engine, cockpit and wing center section) was prominent though and you missed that. Please correct the video title to IJNAF (Imperial Japanese NAVY Air Force), it's also misspelled somewhere in the video subtitles. I don't think Zero looks good without the cowling.
Thank you for the advice! 😁The aircraft will be part of a diorama, that is why the panels are opened. If I were building a standalone model, I would keep them closed. As for the weathering, I like to present models that look more used. This is because such a model tends to attract more attention. Of course, it doesn't always have to match the historical reference 100%, just like in this case. Cheers.🤝
@@Model_Addict No problem, and glad you fixed that IJNAF nomenclature. If intended for diorama then it makes sense. I understand "attraction" factor but very much prefer historic accuracy. It seems you're located in Slovakia? I'm from there. I liked your Slovak AF Mig-29 build, I'm planning to build the same. After I finish Slovak L-29 and L-39!
Unfortunately a lot of modellers have fallen into the trap of weathering a plane until it looks like a death trap, the one that annoys me the most is where they weather to death the landing gear bay/weapons bay and present a pool of fluid on the ceiling part of those bays…implying that the plane was stored upside down so all the leaking fluid accumulated on the ceiling rather than dripping down on to the inner side of bay doors….like they would in reality….because of a thing called….gravity. But I doubt that will stop them from making a brand new state of the art stealth fighter looking like it’s 120 years old and emptied its entire hydraulic fluid tank into its wheel/weapons bays 😂🤭
Eduard decals are horrible.
Hi, I find them easy to work with. The only issue I see is that, when viewed up close, the printing pattern might be visible. However, this mainly applies to large, solid-colored areas. These can still be painted using masks. 🫡
No they ain't, if used right they're brilliant. I've built 4 Eduard kits this year and I've not had any issues with the decals.
Excellent build and video. I have two 1/32 Tamiya A6M2b kits, one 30 percent completed that aid in correcting/improving a 1/24 Trumpeter build. All have added stressed skin effects, dents and uneven surfaces that were common on Zeros. IJN Hemp colour is historically accurate. I'm using Vallejo 71.023 (FS34201)
Thank you, buddy. Your builds are amazing; hats off to you.🙂↕️ I was also considering adding stressed skin effects to my Zero. But, at 1/48 scale, it might not look as impressive as it does on larger models.
@@Model_Addict Thank You. The colour /tone modulation in your painting gives the impression of a stressed skin surface. My intension is to build the 1/24 kit to resemble the restored aircraft from the, Texas Flying Legends Museum. It will be posed in flight with a pilot figure. I returned to the hobby in 2018. Retired from my business designing/fabricating/building custom motorcycles. The site is no longer but a couple of F/book pages and image searches of, Special Effects Chopperworks in Burlington, Ontario, Canada are still online. The skill sets and required discipline from that crossed over to help with model building. Since finding your channel and watching the Spitfire build, an official RAF training film on the practices/procedure for painting, 'High Speed', aircraft is posted on my channel that you may find interesting.
Hello, congratulations on your work. Could you tell me where I can get the files for 3D printing, such as the engine you used? Thank you.
Thanks, mate! There won't be any files available for this engine. It's part of the add-on set from Eduard, Cat.No. 648763. The only options are to buy the set or model your own engine.
beautiful
Thank you. 😁😊
Superb! How about an Eduard Wildcat to go with it! Amazing work!
Thank you so much. The Wildcat is already waiting in the stash for its moment. It's even a dual combo set. I’m not sure how I’ll present it in the video yet, but I’ll figure it out. 😅🤙
Very nice job But I always think that companies like Vallejo are earning big money on products that we are only using 10 drops a year on. but you have to buy 30ml, enough for 10 years. I think we have to made it ourselves. Respect for your video and maybe sponsores.
Oh, thanks for the support. Like everything else, this segment is also about money. In the past, I tried to replace most products with whatever I had on hand or mixed things myself. But now, I’m more inclined to just open, use, close, and not worry about it.👍
Great build. You got the harness wrong, and you're not alone, a lot of builders go the same, incorrect and confused path you took - the "Y" shaped webbing anchor's to the lower seat back - there's a slot for it, very close to the base end of the padding. Check out reference photos, check out the plethora of Spitfire content online, and have a good hard look, then check out how HGW and Eduard instruct regards installation, plus there are heaps of builders who get it right. Not to be picky, but what's with that huge gap between the armour windshield and the fuselage - I say this because of the amount of work you've put in as a whole on the finish, yet the cockpit area, in particular, always draws the eye. That gap is very, very noticeable. Keep on keeping on and go well 🤙✨️
Hey, thanks for the tips! 😊This won't be my last Spitfire, so I'll pay more attention to the harness next time. As for that gap near the windshield... I totally missed it. I was so excited about how the build was progressing that I just ignored it. 🥲I just needed to fill it in a bit with some putty. 😅I'll make sure to be more careful about that next time. Thanks again!🫡🤝
@Model_Addict No worries mate, it's your build and it's up to you, and it's a great effort 👍 *do that research about the harness lol... I've done many marques of the Spitfire, 1/48 mainly and some Tamiya 1/32 (IX's & VIII's) and have the Kotare (Brian Lane) Mk1a in the stash screaming at me to get it happening lol... still have a few Eduard Spitfires stowed, so yeah, I get the reasoning behind doing more, and what an absolutely beautiful subject. Glad you can go forward with it all anyway as you should with your talent. Very warm regards from us here in paradise at Tuckombil via Alstonville and East Ballina 800km north of Sydney ex Maroubra. MATE ✨️ 🤙🤝
Really enjoyed watching you build a stunning model.
Thanks, buddy. 🫡😁👍
Compelling, extraordinary work - beautiful to behold!!
Thank you, I really appreciate it. 😁👋
@@Model_Addict Not at all a problem!!
amazing build well talented like Plasmo ;)
Plasmo is the king. 💪I'm not even close to his level.🤧
Really well done!
Thanks! 😊👋
Uncle Nighshift´s cousin? Very nice work BTW
The cousin from Aliexpress. What you ordered vs. what you got.😂
Very nice.
First of yours I've watched. Absolutely amazing. You have a new subscriber!!
Thank you for your support. I appreciate it a lot. 🫡
Extremely impressive!
😊🫡 thank you very much 😊
Nice video... stunning build my friend...! Cheers from Argentina
Thanks mate! Cheers👍🫡
Your weathering and tonal variations are beyond exceptional!!
Thank you. I'm really glad to hear that.😊
Wowww Mükemmel👌👌👌
Thanks!🤩
Outstanding! Subbed.
Thank you for your support😁👍
Amazing job!
Thank you! 🫡
I'm happy Eduard finally gave away the formula for IJN Hemp Grey.
Beautiful❤️
Thanks❤️
🙂👍
pekne :)
🙂👍
🙂👍
Wow, outstanding build! But is this the S4809 model with tiger stencils?
Thanks! Yes, it’s the GWH Kit No. S4809. 🙂
@@Model_Addict Thanks, I like the digital camo but I don't like the tiger on the tail. Happy that is an option. Cheers. By the way, what is your next project?
I hesitated a bit about which version to choose. Since I'm from Slovakia, this was "our" Tiger, but in the end, I decided to go with this version. 😊 Next project: Spitfire. You've probably already seen that. 😁And this Friday, I'll release a new video where I finish the Zero. The first part is already available here on the channel.👍
@@Model_Addict Now there's a coincidence, I live in Kyoto Japan. 😀 I checked out the Zero progress and it's brilliant! See you started posting vids a year ago, but no way you got this good in a year! Absolutely quality builds. 🙂👍 Subscribed.
Thank you for your support. I really appreciate it. I want to place the Zero in a diorama, so I'll continue with the Japanese theme for a little longer.
Congratulations excelente job! I Made the same brand model few years ago but in 1/32 scale. I would like send You some pictures. Can You give me yor e mail? Tank's.
Thanks, buddy. I really appreciate it. Here is my email address. ms.models.svk@gmail.com I'd love to take a look at the big Hornet. 😁👍
Amazing job it looks so good can you do f-15E academy 1/72 or Great Wall Hobby f-15E 1/72 if it's possible would be some
Oh, thank you very much. The F-15... I will take a look at it sometime. I must have such a legend in my collection.🤙👌😁
@@Model_Addict I recommend the F-15E Academy and F-15E Great Wall Hobby models, both in 1/72 scale. if an academy kit you need an aftermarket engine Nozzle set if Great Wall Hobby they say you will need an aftermarket declas set. would love to see that if it's Posebol good luck
Hello everyone. You might have noticed some strange sounds in the video. 🛰 No, it's not an error but just AI software used to remove music I don't have rights to. 🤖The full-quality videos will be uploaded to my Patreon. There are also other extras, so check it out!
Hello everyone. You might have noticed some strange sounds in the video. 🛰 No, it's not an error but just AI software used to remove music I don't have rights to. 🤖The full-quality videos will be uploaded to my Patreon. There are also other extras, so check it out!
Hello everyone. You might have noticed some strange sounds in the video. 🛰 No, it's not an error but just AI software used to remove music I don't have rights to. 🤖The full-quality videos will be uploaded to my Patreon. There are also other extras, so check it out!