วีดีโอ

We are designing a fun project to show at this year's 3D Meetup in Helsingborg/Sweden. :)

Hi Tron! :) These are typical standard settings, such as the following: Material: PLA filament Layer height: 0.2 mm Perimeters (shells): 2 Top solid layer count: 4 Bottom solid layer count: 3 Infill: 15% Generic print speed: 50 mm/s

Thank you, Vidar! 🙂 It is a perfect toy to play with at the office while waiting for rendering to finish. 😉

Hi, Marco Thank you for your feedback. It is an interesting point of view and, therefore, you can find a test below where nine (9) STEMFIE beams where placed on the build plate of different slicers to test the slicing times - one for the beams containing the logo and part-numer markings, and the other where the same beams had no markings. The differences where small which made it difficult to measure the time accurately using a stopwatch. The slowest slicer in the list was Cura from Ultimaker, but also there, the difference was hard to measure. If you want to repeat the test, please find the two beams you can download from this link: stemfie.org/permalinks/Beam_STR_ESS_BU11x01x01_-_SPN-BEM-0048_with_and_without_text_and_logo_markings.zip 9 STEMFIE beams (with text marking) - Slicing time: 00:28.32 seconds (Ultimaker Cura 4.5.0) - Slicing time: 00:06:02 seconds (Prusa Slicer 2.1.0) - Slicing time: 00:06:81 seconds (Simplify3D 4.0) - Slicing time: 00:16:38 seconds (FlashPrint 4.1.0) 9 STEMFIE beams (without text marking) - Slicing time: 00:28.81 seconds (Ultimaker Cura 4.5.0) - Slicing time: 00:05:95 seconds (Prusa Slicer 2.1.0) - Slicing time: 00:06:80 seconds (Simplify3D 4.0) - Slicing time: 00:17:08 seconds (FlashPrint 4.1.0)

stemfie.org/sps-000001

Varsågod! :-)