- 11
- 17 091
Jaco Du Plessis
เข้าร่วมเมื่อ 29 ก.พ. 2008
Clean Agent Acoustic Nozzle Control Test Series by Wulf Development
Wulf Development performed a recorded test series & case study for a client with a Tiered Critical Data Centre Environment to test the real-world impact of Acoustic nozzles vs standard nozzles on a 200Bar unregulated orifice-restricted Inert Gas Suppression System intended to extinguish fires.
The intent of the case study is to verify the practical implications, limitations, and viability of upgrading the legacy nozzles to acoustic silencing equipment to lower the risk of High SPL frequency modulated resonance damage to Hard Disk Drives in the Data Centre environment.
Three test sets were performed with the first set done with conventional "legacy" nozzles and the two subsequent tests with Acoustic Silencing Technology Nozzles of two different brands.
The intent of the case study is to verify the practical implications, limitations, and viability of upgrading the legacy nozzles to acoustic silencing equipment to lower the risk of High SPL frequency modulated resonance damage to Hard Disk Drives in the Data Centre environment.
Three test sets were performed with the first set done with conventional "legacy" nozzles and the two subsequent tests with Acoustic Silencing Technology Nozzles of two different brands.
มุมมอง: 25
วีดีโอ
Pretoria Gardens Christmas season fever!
มุมมอง 242 ปีที่แล้ว
Pretoria Gardens Christmas season fever!
Rogue tactical paintball CQB Training 2015
มุมมอง 7089 ปีที่แล้ว
A kill cam view of our CQB Training in the SWAT House.Training provided by Mike Procopiou from DNA Paintball & Hobby park.
TM15 Hardwired ripclip paintball rifle mod
มุมมอง 5669 ปีที่แล้ว
This video is about a modification that can be made to the TM15 and its ripclip so that if there is additional silencing on the rifle the ripclip can be wired directly from the APE rampage board S- and battery negative to the ripclip pc-board.This was intended for the RF unit but it is too expensive so i modded it! This gives the ripclip a direct pulse signal to activate and works flawlessly. p...
Inergen inert fire suppression test discharge Multi-Net Systems
มุมมอง 2.8K9 ปีที่แล้ว
We tested a multi-cylinder system to verify that the designed oxygen level drop was within specifications. The test was a success.
FM200 Fire Supression system test
มุมมอง 11K9 ปีที่แล้ว
Test of a FM200 Gaseous fire suppression system in a computer/Switchgear enviroment.
Inergen Fire Supression system test multinetsystems.co.za
มุมมอง 1.7K9 ปีที่แล้ว
Cylinder temperatures drop rapidly from the pressure and atmospheric moisture buildup causing everything to deep freeze.
Fire System test with potassuim Chlorate multinetsystems.co.za
มุมมอง 349 ปีที่แล้ว
Fire System test with potassuim Chlorate multinetsystems.co.za
Fire System test with potassuim Chlorate
มุมมอง 229 ปีที่แล้ว
Fire System test with potassuim Chlorate multinetsystems.co.za
So much misinformation is told about FM200 and how it "displaces oxygen." I've been in 2 FM-200 discharge tests, and the only thing it did was give me an erection both times. I'm dead serious.
If you can still breathe, so can the fire...
Do you still have this gun?I was hoping to see a video on how you did this?
Why does the system freeze like that and why aren't they all frose
i recently got to see a fm200 fire suppresion system test with alarm activation as part of my fire department training fm 200 systems are used here in canada
any video on working of manual release of gaseous system
Why is there an actual dump of gas during tests ?
Kinda catchy rhythm... Time to put a beat to it hahahahaha
Subs 13 Suba back me
"And uh oh ya, your not going to be able to see!"
Unfortunate side effect of FM200, that is why we always need to explain to the clients that while FM200 can't harm you by itself sometimes you may hurt yourself by trying to get out of a 30% obscured area.
No resistor needed? Thanks a lot for your help 👍👍👍
Could you explain exactly how you done that? Thanks in Advance and Cheers from Germany
Hi Andreas, the S+ connection on the TM15 board goes to the second connection from the top of the ripclip pcb, the ground(0V) connection on the TM15 board goes to the square connector on the ripclip pcb.
I made up a removable connection plug connecting the marker and the ripclip together.If you do not disconnect it the ripclip stays on permanently on.