SotoBo Tech
SotoBo Tech
  • 52
  • 68 843
[No batterie electric float] an LED that generates electricity and glows in the sea [Joule Thief]
#ジュールシーフ #レモン電池 #Joule_thief #lemon_battery
ジュールシーフ回路は1.5Vの電池が弱って電圧が下がっても最後までLEDを点灯させられる回路として知られています。
ここでは,海水を電解液とする1個のレモン電池 (すなわちボルタの電池) が発生する低い電圧を,ジュールシーフ回路で昇圧してLEDが点灯出来る電圧に上げます。
一般の「海水電池」や「水電池」は海水や水を容器に注入して電池としますが,この電気ウキは2枚の電極を海中に浸すだけで,海全体を一つの電池とします。
回路は,LED,トランジスタ,2個のインダクタと2枚の電極(亜鉛版・銅板)だけで出来ていて,UVレジンで全体を封止してまるごと海中に放り込めるようにしました。
亜鉛版・銅板と海水での発電について,環境汚染の問題は無いことを確認しています。
The Joule-thief circuit is known for lighting LEDs to the end even when a 1.5V battery weakens and voltage drops.
Here, the low voltage generated by a single lemon battery (i.e., voltaic cell) using seawater as the electrolyte is boosted by a Joule-thief circuit to a voltage at which the LED can be lit.
While ordinary “seawater batteries” and “water batteries” use seawater or water injected into a container to make a battery, this electric float uses the entire ocean as one battery by simply submerging two electrodes into the sea.
The circuit consisted of only an LED, a transistor, two inductors, and two electrodes (zinc plate and copper plate).
The circuit is sealed with UV resin so that the whole thing can be thrown into the sea.
I have confirmed that there is no environmental pollution problem for power generation with zinc plate/copper plate and seawater.
参考 (reference):
CQ出版社オンラインサポートサイト
cc.cqpub.co.jp/system/contents/1283/
BGM: MUSMUS musmus.main.jp/
※これは個人の趣味の電子工作です。記憶違いや思い込みがあるかもしれません。
 ご了承下さい。
回路の耐久性は考慮していません。
特許など知的財産権の調査もしていません。
この回路を利用する場合は自己責任でお願いします。
※This is a personal hobby of electronics.
There may be some misremembering or assumptions.
 Please understand.
 No consideration has been given to the durability of the circuit.
I have not investigated intellectual property rights such as patents.
 If you use this circuit, please do so at your own risk.
0:00 Overview
2:25 予備実験 preliminary experiments
5:16 ジュールシーフ回路 Joule-thief circuit
8:40 製作 making
15:30 電気ウキの製作 making electric float
17:31 他の作例 Other examples of works
18:40 アルミ電極 Aluminum electrode
19:48 環境への影響は大丈夫? Is the environmental impact safe?
มุมมอง: 115

วีดีโอ

[AquesTalk pico] Talking lightning sensor [Arduino]
มุมมอง 4102 หลายเดือนก่อน
#雷センサー #音声合成LSI #Arduino 秋月電子の雷センサーモジュール AS3935 と音声合成LSI ATP3012 (AquesTalk pico LSI) を,Arduino nano で制御して,しゃべる雷センサーを作ってみた。 I made a talking lightning sensor by controlling Akizuki Denshi's AS3935 lightning sensor module and ATP3012 speech synthesis LSI (AquesTalk pico LSI) with Arduino nano. 関連動画 (Related video) : 【音程可変】Arduinoで音声合成LSIにしゃべらせてみた【AquesTalk pico】 How to change the pitch of the sp...
[Long battery life] A talking clock with Arduino and voice synthesizing LSI
มุมมอง 1.4K3 หลายเดือนก่อน
#AquesTalk #リアルタイムクロック #Arduino 待機電力ほぼゼロ。Arduinoでも実用になるしゃべる時計を作ってみました。 Almost zero standby power. I made a talking clock that is practical even though it uses Arduino. Schematic (Talking_Clock_Schematic.jpg) drive.google.com/file/d/1gQoCzRiPRQVZDD_NMjpJVu2WOAKrNkVL/view?usp=drive_link Sketch (Talking_Clock.ino) drive.google.com/file/d/1dQ2rN_1zUJk62tAxXwwJNHM6SOhZNYAk/view?usp=drive_link 関連動画 (...
How to change the pitch of the speech synthesizer LSI AquesTalk pico by Arduino
มุมมอง 1.4K4 หลายเดือนก่อน
#AquesTalk #プログラマブルクロックジェネレーター #Arduino 音声合成LSI AquesTalk picoは(本来出来ないことになっていますが)外部からクロックを与えることが出来ます。 そして,外部クロックの周波数を変えることで,音声の音程を変えられます。 また,PCとのシリアル通信だけでなく,Arduinoとシリアル通信(UART)やI2Cでつなぎ,Arduinoの制御で発声させることが出来ます。 外部クロックのプログラマブルクロックジェネレーターをArduinoで制御することで,音程を変えながらArduinoの制御で発声させることが出来ました。 The speech synthesis LSI AquesTalk pico can be clocked externally (which it is not supposed to be able to do)....
Handmade 3-terminal LED with built-in MOS FET
มุมมอง 1.5K6 หลายเดือนก่อน
#3端子LED #MOSFET #電子工作 チップLEDとMOS FETで,一見市販のLEDと同じモールドの3端子LEDを作ってみました。 LEDの電流は電源ピンから供給し,入力ピンの"High" / "Low" でLEDを点灯させます。 入力ピンには電流が流れないので,つなぐ回路の負担になりません。 I made 3-terminal LEDs with chip LEDs and MOS FETs in a mold resembling a commercial LED. The current for the LED is supplied from the power supply pin, and the LED is turned on by a "High" / "Low" level on the input pin. Since no current flows ...
Measuring the underwater weight of a camera with a hanging scale made by petit modification
มุมมอง 1607 หลายเดือนก่อน
#吊り下げはかり #水中重量 #水中カメラ 市販の精密電子はかりの底面に穴を開けるだけのプチ改造(加工)で,精密な吊り下げはかりを作ります。 その精密吊り下げはかりで,ルアーの水中重量,ウキの浮力,水中カメラの水中重量を測ります。 市販の吊り下げはかりは,重いものを測るためのものが多く,最小桁が0.1g以下の精密なはかりが見当たりません。 物を台に乗せてはかる一般的なタイプの電子はかりなら,精度0.01g(メーカー公証値)のはかりが安価で入手できます。 その底面に穴を開けるだけの加工で,本来の使い方も可能なままで,精密な吊り下げはかりに改造出来ます。 A small modification of a commercially available precision electronic weighing instrument by simply drilling a hole in...
[Soldering Assist] Solder extruder made with 3D printer parts
มุมมอง 6399 หลายเดือนก่อน
#はんだ付け補助 #SolderingAssistant #フィラメント押出し機 3Dプリンタのフィラメント押出し機部品を利用して,ステッピングモーターではんだを押出すはんだ押出し機を作ってみました。 フットスイッチを踏んでいる間はんだが押出され,放すと少し引っ込みます。 はんだ付けをしていて,もう一本手が欲しいときや,はんだを次々繰り出してほしい時に役立ちます。 秋月電子のPICステッピングモータドライバキットを利用し,それにコントロール回路を付加しました。 コントロール回路はMOS FETによるパルス回路・nMOSロジックと標準ロジックのシュミットトリガインバーターで作りました。 I made a solder extruder using a 3D printer filament extruder parts and a stepper motor to extrude so...
[No IC or microcontroller] Quick-press switch made from scratch using only MOS FETs
มุมมอง 1K10 หลายเดือนก่อน
#nMOSロジック #logisim-evolution #電子工作 クイズ番組などで良く見る早押しスイッチを, フリーの論理シミュレーター logisim-evolution でゼロから設計します。 ディスクリートのnMOS FETでnMOSロジックを組み,標準ロジックなどのICやArduinoのようなマイコンを使いません。 誰かが作ってくれたブラックボックスなしで,ゼロから自分で作る早押しスイッチです。 nMOSロジックはCMOSロジックの前,1970年代のIC内で実際に使われていた回路方式です。 A quick-press switch often seen in quiz shows is designed from scratch with logisim-evolution, a free logic simulator. The nMOS logics are buil...
ポケベルから進化した280MHz デジタル防災ラジオを借りてきた
มุมมอง 62111 หลายเดือนก่อน
#280MHzデジタル同報無線システム #防災ラジオ #ポケベル 280MHz防災ラジオは,ポケベルの文字伝送を応用したもので,放送内容を文字で送信し防災ラジオに内蔵された音声合成装置で音声に変換します。 90年代,携帯電話の普及前に流行したポケベルは,数字や文字を液晶ディスプレイに表示するものでしたが,近年目覚ましく発達した音声合成技術を取り入れて,いわば喋るポケベルにしたのがこの防災ラジオです。 市から貸与された280MHz防災ラジオを設置してみたので,これはそのレポートです。 ※これは個人の趣味の動画です。記憶違いや思い込みがあるかもしれません。 間違いがある場合,コメントを頂けるとありがたいです。 BGM: [MUSMUS] musmus.main.jp/ 0:00 概要 / Overview 2:47 280MHzデジタル同報無線システム 4:46 実機の設置
[Arduino] Over-reaction camera for motorcycles that reacts to angular velocity
มุมมอง 82ปีที่แล้ว
#Arduino #MPU6050 #加速度センサー 普通の速さで走っているのにレーサーのごとく大げさにバンクする映像が撮れるオーバーリアクションカメラです。 以前,当チャンネルで紹介した「遠心力に応じて角度を変える車載カメラ」を二輪車でも搭載可能にしました。 6軸ジャイロ・加速度センサーMPU6050とArduinoで,二輪車がカーブを曲がる際の角速度に応じてGoPrpを傾けます。 二輪車がカーブを曲がる際は,そもそも二輪車は遠心力と重力が釣り合うように車体が傾けられるので,上掲の遠心力方式ではうまくいきませんでした。 今回,角速度に反応するようにしたことで二輪車にも搭載可能になりました。もちろん四輪車にも搭載可能です。 回路とメカは前回と同じもので,スケッチのうち数行(取り込むデータを加速度から角速度に)書き換えただけです。 通常でも,二輪車に固定したカメラではカーブでライダー目...
Rectenna WiFi detector with sound and light output
มุมมอง 907ปีที่แล้ว
#レクテナ #WiFi #八木アンテナ 電磁波を直流電流に変換する「レクテナ(rectenna)」でLEDを光らせる実験が知られていますが,LEDを光らせるほどの電圧が出るなら電波のあるなしを音声信号としてブツブツ音で聞き取ることが出来るのではと考え実験してみました。 「レクテナ」で検索すると,「rectifying antennaの略で、整流器(rectifier)とアンテナ(antenna)を組み合わせて、電磁波を直流電流に変換するデバイス」と出てきます。予備実験としてまず,下記のサイトと動画を参考にレクテナでLEDを光らせてみました。 うまく光ったので,インダクタで電波をカットして音声信号をオーディオアンプにつなぎスピーカーを鳴らしてみました。 簡単な八木アンテナにすると1m程度までWiFiルーターの電波を検知出来ました。 Rectenna WiFi detector with...
3D map Sakurajima made with an inexpensive 3D printer and tattoo sticker
มุมมอง 259ปีที่แล้ว
3D map Sakurajima made with an inexpensive 3D printer and tattoo sticker
I made a Penrose triangle with Fusion360 and a 3D printer
มุมมอง 282ปีที่แล้ว
I made a Penrose triangle with Fusion360 and a 3D printer
BS cable ring oscillator to measure the speed of light
มุมมอง 664ปีที่แล้ว
BS cable ring oscillator to measure the speed of light
Tried logic simulator Logisim-evolution (2)
มุมมอง 513ปีที่แล้ว
Tried logic simulator Logisim-evolution (2)
Tried the free logic simulator Logisim-evolution (Part-1)
มุมมอง 665ปีที่แล้ว
Tried the free logic simulator Logisim-evolution (Part-1)
Dashboard Camera that Changes Angle in Response to Centrifugal Forces (Part2 Circuit edition)
มุมมอง 95ปีที่แล้ว
Dashboard Camera that Changes Angle in Response to Centrifugal Forces (Part2 Circuit edition)
Dashboard Camera that Changes Angle in Response to Centrifugal Forces
มุมมอง 122ปีที่แล้ว
Dashboard Camera that Changes Angle in Response to Centrifugal Forces
3D map of Tokyo made with a 3D printer - Texture bonded with a UV resin female mold
มุมมอง 654ปีที่แล้ว
3D map of Tokyo made with a 3D printer - Texture bonded with a UV resin female mold
[3D Printer] Making a 3D map from GSI map
มุมมอง 4.6K2 ปีที่แล้ว
[3D Printer] Making a 3D map from GSI map
ToF automatic brake for RC Kei Truck WPL D12
มุมมอง 2042 ปีที่แล้ว
ToF automatic brake for RC Kei Truck WPL D12
【3D Scan】【Mixamo】お盆のナスに踊ってもらった / Dancing Bon Festival eggplant
มุมมอง 1512 ปีที่แล้ว
【3D Scan】【Mixamo】お盆のナスに踊ってもらった / Dancing Bon Festival eggplant
[3D Printer] Textures from photographs that can be freely stretched and attached to 3D objects
มุมมอง 1K2 ปีที่แล้ว
[3D Printer] Textures from photographs that can be freely stretched and attached to 3D objects
Using a flip-flop hidden in a Schmitt trigger circuit
มุมมอง 4692 ปีที่แล้ว
Using a flip-flop hidden in a Schmitt trigger circuit
Using transistor breakdown to replace Zener diodes
มุมมอง 2172 ปีที่แล้ว
Using transistor breakdown to replace Zener diodes
Making a Pan/Tilt Motorized Platform, Part 2: Circuits
มุมมอง 3122 ปีที่แล้ว
Making a Pan/Tilt Motorized Platform, Part 2: Circuits
Making a Pan/Tilt Motorized Platform, Part 1: Mechanics
มุมมอง 8272 ปีที่แล้ว
Making a Pan/Tilt Motorized Platform, Part 1: Mechanics
Making a mini funnel for Kikkoman soy sauce jug
มุมมอง 2222 ปีที่แล้ว
Making a mini funnel for Kikkoman soy sauce jug
3D scan with WIDAR for Android to make a 3D fish print
มุมมอง 15K2 ปีที่แล้ว
3D scan with WIDAR for Android to make a 3D fish print