- 109
- 22 494
Oxize
เข้าร่วมเมื่อ 14 เม.ย. 2012
Stormchasing content mostly. Also some misc or astro videos which are prbly interesting.
Feel free to donate. See link below to donate! Thank you verry much!
www.paypal.com/donate/?business=8DSCZZU7TZBKA&no_recurring=1¤cy_code=EUR
Feel free to donate. See link below to donate! Thank you verry much!
www.paypal.com/donate/?business=8DSCZZU7TZBKA&no_recurring=1¤cy_code=EUR
วีดีโอ
Allsky Nacht 19/20 september
มุมมอง 12หลายเดือนก่อน
Maan, wolken, dauw. Veel problemen voor Astrofotografie deze avond. Toch wel even een leuk filmpje van de Allsky.
Gemini eaf on a Evolux 62ED!
มุมมอง 1382 หลายเดือนก่อน
The standard couplers from Gemini didnt fit in the 18mm coarse knob shaft hole in the evolux. The couplers were like 18.6mm diameter. So i shaved 1 side of the coupler with an stone grinder, until it fitted. An Lathe would be better, but i dont know who such thing have. If you are carefull with stone grinder it works also. The Gemini Shaft is 5mm and the evolux Coarse shaft is 6mm. 1 Coupler wh...
Carbidschieten en oud/nieuw 2022-2023 in maarkel en Goor.
มุมมอง 205 หลายเดือนก่อน
Eerst paar carbidfilmpjes zijn van dit jaar, en aantal van de carbidfilmpjes na de slowmotions en neefje zijn van vorig jaar. De rest van de siervuurwerk is allemaal van dit jaar.
Twente Rally 2022 - Hengelo - Action, Mistakes, Crashes, Drift
มุมมอง 6682 ปีที่แล้ว
1 hour Twente Rally 2022 on Sunday 16 oktober. Historic Rally cars first, then Normal Rally, and vice versa. 34:01 Subaru Mistake 50:31 Ford Escort MK2 Little Crash 52:01 Ford Escort RS16000 Drift 1:07:23 Honda V-tec And manny more...
clicking gone after putting gears closer.
มุมมอง 1222 ปีที่แล้ว
clicking gone after putting gears closer.
Clicking noise gone after lifting prusa.
มุมมอง 732 ปีที่แล้ว
Clicking noise gone after lifting prusa.
how's the screen wobble and flex?
Thanks!
hey man im looking for information - is there actualy a delete button on the keyboard? thanks!
No, it doesnt have a delete button. An alternative way is using the backspace button.
On mine, the shift was even more pronounced. I tightened the 6 set screws that are spaced 120 degrees around the focus barrel. I assume that there are three "shoes" that ride on the flats that share the same spacing and that the set screws adjust the force of the shoes to the barrel. Not sure if I fucked anything else up by adjusting them.
Just dont draw them in. Just drraw then like 90c degrees, and do that for all screws. And remember how much times you did each screw, because you want an evenely balanced stiffer slop in it.
How?? What did you do?????
See my respond on Eddie
I am having the same issue. Trying to a way to adjust the backlash out of the focuser.
So how did you do it? After multiple adjustments mine is a wobbler.
Just tighten all scrub screws 1 quarter. Dont turn to fast. Do all scrubscrew equal otherwise you have 1 side more than the other resulting barrel get swifted.
Can you please tell me the t ring included with the reducer or i have to by seperately to connect the dslr
seperate
I’m having the same ticking. I saw another video and i guess it might be a set screw holding a gear in the extruder being loose
What size is the focuser? 1.25 or 2 inches
2 Inches but way more sturdy than the evostar.
I think its more than 2 inches actually...
This day you play nazi facism millitary gear...this gear against red army. Tommorow you will wipe out by bolsheviks hordes with nuke because you help those nazi ukrain.
Feiyutech g6 gimbal
Go pro 9 compatible
I had exactly the same noise. I too thought it was the X axis, but it was the extruder, which retracts in sync with the X axis movements. This fixed it for me. No clicking at all after following the suggestions in this video. I just cleaned out the filament holes with a 2mm drill and fitted a very thin washer. th-cam.com/video/mvXmjdIef8Y/w-d-xo.html
That is extruder gear sound, not x axis. you should re assemble the extruder stepper motor and re-align the gear.
Hello how did you add GoPro9 in Feiyutech app through wifi. I have a Gopro 10 but i am struggling to add it to app to control it to start and stop directly from app or from Gimbal buttons. Please help. Thanks in advance.
Hello how did you add GoPro9 in Feiyutech app through wifi. I have a Gopro 10 but i am struggling to add it to app to control it to start and stop directly from app or from Gimbal buttons. Please help. Thanks in advance.
Did you ever find out?
where i can by??? adapter
Did you add any additional weight to make it more stable (as gopro 9 is heavier)?
Does the gimbal WiFi connect to the Hero9 so you can control it?
Can you plz make a video of how u did this, and the accessories u used
Nice test Video, I wish you Happy New Year 2021..
have you shared the profile? it looks awesome!
No, not yet.
whats your fan?
Yet one more reason to hate Streamlabs OBS. There the option you tinker with defines the sheer number of pixels allocated for the text and not the spacing between the wraping text. Obnoxious.
Hi. Wondering how do you feel about it? I need this to control my recording software. For when I walk away from PC to get a better mixing on final of the song? Thanks
So cute
buy a fucking mic.
recorded in wrong aspect ratio, but enough to see the stats.
confirmation that he is banned.
I cant actually find custom word width
On obs studio tick the box at the very bottom that says "Use custom text extents" then you can adjust width and height
yea i figured that out my problem is that when i do that it makes all the text an E with a dash for some reason and idk why i thought it was just like that in the preview but it kinda stayed like that. :/
When people stop buying there games they will take this problem seriously.
still not banned this player
Good job on recording that fucktard.
whats your Origin mate.
Just the name Oxize
theyre just 12 years old butthurts.
can you make a gta v gameplay.
rip
Was a faulty card all time back then.
first
yup same for me.. bug was gone for few days but now it's back. i just found my old radeon and installed that card.. now the freezes are over.. for now.. we'll see how long it lasts
this bug started to occur for me after update 9.4, before that i had no problems. I'm running it on a GTX275, phenom II X4 920 and SSD
Can you test it with an other videocard? Lend from a friend or something? My 460gtx was faulty all time over the years, and never really did something against it. I though it was always the driver. With the 780 i got no problems.
I was using SLI first, but had too many problems with it.. so I tested both cards seperately, same result. I have an old ati radeon HD4870 somewhere, can test it tomorrow. I managed to fix the crashes though, but only a temporary solution: I used nvidia inspector to downclock my graphics card, then i made a batch script to keep my P-state at 0 at all times.. this works but I have to start up the program and the batch script every time I want to play wot.. super annoying. I'll test the radeon and see if the same bug accurs, i'll post the results here
Well i did the same way as you. Just keep your P-state locked, but be aware if it runs P-0 its uses the maximum wattage of your videocards, because P-0 is the highest power performance.
i couldnt get my hands on that radeon card, dont know where i left it.. but since last update (micropatch) the bug was gone.. still laggy at some points, but no more crashes
i have the exact same problem.. tried everything, nothing seems to work so far. I will try your p-state batch script
Well it seems, this card was faulty all time when i got it. Running now at an 780 (titan chip), and dont have problems any more.
I had the same problem and I just solved it. I have two HDD one SD, the problem which I was pinned to the slots on the motherboard 1-3. As soon as I put 1-2 everything works fine :)
well not quieted :| Still have problems after a while.
Solved problem. Videocards is having an P-state bug. Can be force locked with Nvidia Inspector.