- 90
- 185 274
BuiltMikesWay
United States
เข้าร่วมเมื่อ 23 ส.ค. 2020
A man, his dog and his 34 Ford project. AND Camping Wagon project... and Chevy SS turbo project. Plus, whatever projects that my friend may have can help out with along the way. If I can do it, you can do it, and I'll show you how. Small garage? No garage? You can still make it work.
The Turbo Bro Ranger! '84 Ranger w/ an '87 SVO fixed the oil leak, clutch and drive shaft LETS GO!
The turbo swap Ranger is the coolest project I've ever got. And is definitely the cheapest I've had to get running and driving. Thanks for watching.
มุมมอง: 229
วีดีโอ
THE BRO RANGER! 1984 Ford Ranger with 1987 Turbo SVO engine RESURRECTED!
มุมมอง 29014 วันที่ผ่านมา
I COULD NOT pass this one up! I know you car guys understand. This Ranger has sat for years! The previous owner swapped the engine for a 1987 Turbo SVO and couldn't get it to run properly. It took some time and just about all my patience but I figured out their fatal error.... along with plenty of minor ones as well.
FIRST TEST DRIVE! The AWD Turbo SS Sounds Amazing & I fix the Brake Lines & Gaslight
มุมมอง 241หลายเดือนก่อน
A year and a half later, the Turbo SS AWD truck has hit the road. After 4 donor trucks and 100s of hours of work, the truck drives for the first time. We have a long way to go but I can see the greenlight at the end of the tunnel. This truck is going to hurt some feeling in due time. Have a great day!
2003 Ford Lightning WRECKED by Yellow Truck Rubbish TOTALED!?
มุมมอง 7022 หลายเดือนก่อน
You may have noticed an absence of the Ford Lightning on the channel, no car shows, no cruises, no burnouts. Here is the story of why. This video was inspired by Rob Pitts the ultimate story teller. The BuiltMikesWay household was deeply saddened by his passing. F^@$ CANCER.
4L80E Swap Part 3: Finished! The AWD Turbo SS has HP, the Wheels are Moving!
มุมมอง 3432 หลายเดือนก่อน
The final chapter, finally! I was so relieved to see those wheels moving! This is is one of those steps that make you believe the end is in sight! I can't wait to start testing.
4L80E Build: Jakes D3 PRO TRANSBRAKE for AWD TURBO'D SS Silverado Pt.2
มุมมอง 1293 หลายเดือนก่อน
4L80E Build: Jakes D3 PRO TRANSBRAKE for AWD TURBO'D SS Silverado Pt.2
4L80E Build AWD Level 5 Jake Performance for 1500HP+ SS Silverado TURBO
มุมมอง 6283 หลายเดือนก่อน
4L80E Build AWD Level 5 Jake Performance for 1500HP SS Silverado TURBO
SHE RUNS! After a Struggle Fest the 5.3 Precision Turbo SS AWD Silverado is ALIVE.
มุมมอง 3755 หลายเดือนก่อน
SHE RUNS! After a Struggle Fest the 5.3 Precision Turbo SS AWD Silverado is ALIVE.
12v POWER Checking all systems and completing the fuel lines in the AWD TURBO RACETRUCK
มุมมอง 1525 หลายเดือนก่อน
12v POWER Checking all systems and completing the fuel lines in the AWD TURBO RACETRUCK
Prepping 1000 HP Fuel System for Turbo'd AWD Silverado Race Truck
มุมมอง 2016 หลายเดือนก่อน
Prepping 1000 HP Fuel System for Turbo'd AWD Silverado Race Truck
AWD Turbo Silverado Race Truck: Cold side DONE, Front End Assembly LOOKS GOOD!
มุมมอง 1367 หลายเดือนก่อน
AWD Turbo Silverado Race Truck: Cold side DONE, Front End Assembly LOOKS GOOD!
AWD TURBO TRUCK: Radium Fuel Cell, when you want ALL the POWER
มุมมอง 4048 หลายเดือนก่อน
AWD TURBO TRUCK: Radium Fuel Cell, when you want ALL the POWER
AWD Truck Custom Turbo Kit Part 3: Hot Side Exhaust Complete... Finally
มุมมอง 2719 หลายเดือนก่อน
AWD Truck Custom Turbo Kit Part 3: Hot Side Exhaust Complete... Finally
AWD Truck Custom Turbo Kit Part Two: Problem Solving equals lots of Welding
มุมมอง 1829 หลายเดือนก่อน
AWD Truck Custom Turbo Kit Part Two: Problem Solving equals lots of Welding
AWD Truck Custom Turbo Kit Part One: Fitting
มุมมอง 76910 หลายเดือนก่อน
AWD Truck Custom Turbo Kit Part One: Fitting
C5 67k original Miles, Why and How I have a VERY NICE Corvette now.
มุมมอง 39111 หลายเดือนก่อน
C5 67k original Miles, Why and How I have a VERY NICE Corvette now.
4L80E Conversion for the NP149 and SS Interior Swap into the new Cab
มุมมอง 341ปีที่แล้ว
4L80E Conversion for the NP149 and SS Interior Swap into the new Cab
The Devil is in the Details: 351 Cleveland Mockup in the 34 Ford
มุมมอง 218ปีที่แล้ว
The Devil is in the Details: 351 Cleveland Mockup in the 34 Ford
351 Cleveland dropped into the 34 Hotrod: it's really coming together.
มุมมอง 541ปีที่แล้ว
351 Cleveland dropped into the 34 Hotrod: it's really coming together.
How Low is TOO Low for my 1934 Ford Tudor HOTROD?
มุมมอง 1.4Kปีที่แล้ว
How Low is TOO Low for my 1934 Ford Tudor HOTROD?
Cummins Swapped Grand Torino Wagon: Found Our Engine
มุมมอง 349ปีที่แล้ว
Cummins Swapped Grand Torino Wagon: Found Our Engine
New Project: What UNIQUE CLASSIC car did we buy
มุมมอง 224ปีที่แล้ว
New Project: What UNIQUE CLASSIC car did we buy
Broken Head Stud in the Block, Can It Be fixed?
มุมมอง 319ปีที่แล้ว
Broken Head Stud in the Block, Can It Be fixed?
Painting the Block & Avoiding Catastrophe. Turbo 5.3 SS Race Truck Build
มุมมอง 760ปีที่แล้ว
Painting the Block & Avoiding Catastrophe. Turbo 5.3 SS Race Truck Build
NEW PARTS for the 34 Mocking up Hairpins for the 9" Currier Rearend Swap Meet Finds & New Equipment!
มุมมอง 425ปีที่แล้ว
NEW PARTS for the 34 Mocking up Hairpins for the 9" Currier Rearend Swap Meet Finds & New Equipment!
SS Clone Race Truck 1150 HP 7675 Precision Turbo 5.3 LS AWD this heart has BIG POWER
มุมมอง 616ปีที่แล้ว
SS Clone Race Truck 1150 HP 7675 Precision Turbo 5.3 LS AWD this heart has BIG POWER
Down She Goes! Getting a 3" drop in the rear for less than $200, SS AWD Silverado DIY
มุมมอง 443ปีที่แล้ว
Down She Goes! Getting a 3" drop in the rear for less than $200, SS AWD Silverado DIY
Putting the Wallbro Hellcat 535 in the SS Clone AWD Silverado for up to 900 hp for the new engine!
มุมมอง 183ปีที่แล้ว
Putting the Wallbro Hellcat 535 in the SS Clone AWD Silverado for up to 900 hp for the new engine!
1K BOYYYYYY
@@StationroadRatrods yes sir, I'll get you a video on the Silverado today. It was stormy AF this weekend. How are you doing today?
Does it came turbo from ford ?
@autobot8095 not in a Ranger, the motor and trans is form a 87 thunder bird which is super fun and exciting to drive
@@builtmikesway1167 nice enjoy her , lightnings & rangers that era were so fun 👍🏻
@autobot8095 yes sir, I've been daily driving my lightning ⚡ so much fun. I love getting off work and driving that thing home. Have a good day and thanks for watching I appreciate you.
Duck Dynasty!
@@postrocks3441 hell yeah brother
That C&L blower plenum is a collectors item now. Take a 4" holesaw and put a few holes into the lower half of that airbox.
@@thastinger345 really a collectors thing? Good idea on the air box mite find a extra and do that. Thanks for advice
Nicely done! It looks like you used Stiegemeier as a reference.In the future I would not try to shadow his porting because opening up the eaton on the bottom that much usually loses 20+ ft lbs of torque and you can definitely feel that on a truck.I would focus solely on opening up the inlet and you can still take ALOT more off than you did then just use silicone rtv for a gasket.You would want to cut the two ramps in the inlet that lead directly to the rotors down about 1/2 inch.If you want to open up the bottom a little use Jokerz or POSI for a reference.The inlet porting is really what makes the power the outlet is mainly opened for offseting the high air charge temps.When its done right its a 2-3psi increase
@@bigdaddy5212 thanks I'll keep that in mind, I'll get back into it soon it's just a stage one and I gained almost 2 psi I was very surprised.
This is WAY cooler than a ranger with a diesel
@@StationroadRatrods I think so, the engine and trans go for 2k only. Wait.... Where did you see a ranger with a diesel? Haha this thing is going to be fun! I'll get the draggy out soon and show you a real 60ft haha
@@builtmikesway1167Growing up, we had a ranger diesel 4x4 to check the cows. 4 cylinder diesel with a 5 spd. They made them. I would kill to have that old truck back..
@robertelee6712 that's cool, I guess I've just never saw one. I'll have to look for one now lol
I felt like you needed more projects
Shut up baby, I know it
Heyheyyyy that’s sick!
@@StationroadRatrods oh just you wait, surprises are coming. Yeah I can't believe I got it so cheap and fixed. I just shorted the drive shaft so tires are going up in smoke this weekend. What are you working on? Don't work to hard
Haha hell yeah!
@@trailercourtsupervisor thanks super lucky on that one haha
Can’t wait to see what you’ve got in store next!
@@trailercourtsupervisor it should be a blast! I'm going to bleed the clutch and make a drive shaft on Monday. I'm still in shock that it was that easy. I did work on it for like 6-10hrs to find the problem tho. What are you working on?
That's 100% correct thanks for commenting and watching. Have a wonderful weekend.
I would but my boyfriend left me for a Ford Ranger
@postrocks3441 lol 😂 must be fast AF boi
So it's like a one way valve and they put it on backwards?
Whats difference in the cw head and cleveland head i thought they were identical?
That's what I have learned since then, I guess they are the same. Who would have thought lol
🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸
@@regularjoe621 hell yeah brother!!
@@builtmikesway1167 Nice truck 👍👍
Ranger Danger
Nice I need to work on my editing skills so i can do split screen stuff like this. Good video subbed
@@tylerwalker2206 thanks I really appreciate but we are about to step our game up and do 4k, the sun or something was affected the quality. Let me know if I can help in any way, I'll be checking out your channel too.
@@builtmikesway1167 thanks man i dont know what im doing i use a gopro 12 most of my stuff and its not the best
Dude that’s friggin wild
@@StationroadRatrods I thought you mite like this project, I got it so cheap coz it didn't run.
Just what you need
@@postrocks3441 I agree more boost! 🐌 🐌
D.A.F
@@justingodfrey5263 thanks you sir
Sick
@@JasperWeddle thank you thank you
updates?
@@Roosterjello unfortunately not, the car will be up for sale soon because of storage problems. I really appreciate you asking and checking my channel out.
Experienced an aluminum battery box cover come off a crappy truck-drivers fault for not doing a pre-trip- bent my tie rod, 76 F-250 4x4, drove over it and seen the box slide into the ditch. Sped up and tried to acknowledge the stund Driver, who never did Piss all, phoned the company, and Nothing happened. After my shift, went and looked, battery box cover was gone, could still see all the marks. So Either the Trucking Company come and took it away, or some scrappers grabbed it. So glad I wasn't driving a car.
@@danderson9881 that sucks sorry to hear that man, thanks for watching and taking the time to comment. Did you get your truck all fixed up yet?
@@builtmikesway1167 ohya, it's a work in progress! Actually bent the tie rod straight, then replaced it due to wear.
Are there any other videos of the cummins torino?
@@CharlesMaynard-w3q unfortunately not, the car will be up for sale soon because of storage problems. I really appreciate you asking and checking my channel out.
Amazing job on the truck man. It sounds gnarly. If someone thinks they can do a whole brake job without forgetting a flare nut, then they’re lying to themselves 🤪
@@StationroadRatrods thanks I appreciate it buddy! Hope you had a good weekend, what are you working on? Happy Monday man I hate brakes fyi
@@builtmikesway1167 I didn’t pick at much this weekend, I’ve had a flu or something for a couple weeks so I took the weekend to try to recover lol. Rocker panel stuff this morning 🤮 Also yes brake suck
@@StationroadRatrods that sucks feel better man!
Congrats man
@@Forced2BFordFan thanks I really appreciate it ALOT
I'm ready for an AWD drive donut. Will you take on passengers? 😜
I'll film it
@@postrocks3441 let's go, your first!
nice :) it should be a pretty fun truck
@@siamiam thanks I appreciate, wait till we make some real power :)
That damage sucks
@@stevenhanna242 it does but I'll get her fixed up good as new.
Aviator fog lights
@@stevenhanna242 yes sir, just ordered some. Thanks for watching
In my area i used to see 3 all the time! Now i think im the only one left, havent seen any in months😢
@@Aaron.svt99 yeah it's sad, or ppl sell them cause they are worth so much now
@@builtmikesway1167 yup, just gonna have to hold on to mine as long as i can, good luck on the rebuild
@@Aaron.svt99 I'll be keeping mine as well man!
Its kinda sad man, i keep seeing posts and videos of these 2nd gens crashing/salvaged/parting out😢 It makes me worry about that maybe we wont be seeing many of these trucks out on the road anymore
@@Aaron.svt99 not many, you're going to see less and less
What belt did you end up using?
@@MACtheTechnician I'll have to look and see if I can find it, I'll let you know
@@builtmikesway1167 thank you very much. I have an 03’ HD I’m looking to upgrade slightly. Already done the BBK 65mm throttle body. I just wanted to make sure I order the right belt for the new lower pulley.
@@MACtheTechnician hey your going to have to check with Johnny lightning. I couldn't find the package and it's rubbed off already. I do love the Harley trucks. Good luck man
sucks to hear about your truck man she sounds awesome cant wait to see what's next
@@bigbosshoss8148 thanks I appreciate it, I hope my neighbors like the sound of my truck as much as you do lol I leave at 4am opps
But it's so comfy
Dude you need a new chair
Good luck buddy, and have fun! I’m no master by any means but if you have any questions you’re more than welcome to ask, and I’ll help where I can
I appreciate it buddy, but I think I'm going to order Holley terminator x and 1650cc injectors this week. Then drop it off at the dyno shop lol yeah yeah I know cheater lol
Thanks for the shoutout Mike, looking good!
No problem 👍
I need to put a new core support in . Do I need to remove the fenders to do this ?
@@jeffreyeiford2750 yes for sure and you need to recheck alignment before welding. Mite take a few tries, be patient. It's worth it in the end. Good luck man
@@builtmikesway1167 ha ha I’m getting my truck painted Monday - Great . Thanks man I appreciate you. Do you have any insite on a replacement?
That’s a mean sounding truck!!!
@@Adamdoyon it's getting closer and closer, how are you doing man?
Sounds like a BEAST!
@@Rheaux thanks it's getting better and better
Dude! So cool to see the wheels moving . It sounds bad ass,!
It feels good to have this part finally done. A huge step closer to getting on the track.
@@builtmikesway1167 looking forward to watching that
@@postrocks3441 thanks I really appreciate it
Hell yeah dude it moves!!!
@@StationroadRatrods I feel like we are both getting some where now haha have a good Sunday man
Do you still have your lightning mike?
@@405SVT yes sir I do, I'll have a new video out in a few weeks, with an update and new mods to come. Thanks for asking, do you still have yours?
Oh ya I still have mine. I will never get rid of it. I'm glad to see you still have yours
@@405SVT how long have you owed it? How many miles have you put on it? Have a great day brother
I have had it for almost two years and it has 94k on it. I have only put 400 miles on it since I have had it
U need to glaze them alot more and then actually use a product properly on camera then ask but be subtle but clear in a TH-camr tone for some free stuff. Then email them your video and if its the stuff u really want then in the email propose a review of whatever products they are willing to send u. Then u make maybe 3 videos probably at max and reap all the rewards. But in order to get free stuff u gotta do the email step 9 times outta 10
@@LilSnotbag haha it's was more of a joke then anything. It would be nice but not holding my breath. Thanks for watching and commenting, hope you have a great day
Nice job, but why is the cooler so small if temperature burns automatic s up which it does. Go bigger you have room. Pretty work🤘🇺🇸
@@christophergriffin8344 that cooler is for 40k I believe, should be enough. One of my friends has the same one and has no problem at all. Thanks for the compliment and taking the time to comment. I appreciate you and hope you have a great day
I need this for my ac compressor
@@willpower3692 it would 100% would haha have a Great day
And what's going to happen to that fan first time you go four wheeling
@@davbin2 it's a fun/race truck buddy. No off-road for this girl. If I was going, I would agree that it was a super bad place. Thanks for commenting, I hope you have a great weekend.
I love the 4l60's, 4l80's, and the 700r4. The vehicles I've ridden/driven in has had those transmissions along with others but those are the ones I the name of I've had experience with. My mother had an 98 Chevy Astro AWD with a 4.3 Vortec and 4l60. I don't how many times as a kid when we'd be traveling the numerous times on the highway and we'd be tipping the scales of 100-110+ mph in it. My stepdad had an 88 C2500 with a 350 TBI and 700r4. It had a million miles on it when he sold it only rebuilt once and ran like it had only a quarter of the miles at best. My stepdad now has a C1500 with a 350 Vortec and a 4l60. Has around 150,000 miles. Runs like nobody's business and is pretty quick. It'll hit 60 from a dead stop in les than 5 seconds if you don't spin the tires the whole way to 50mph first. My dad had an 96 C2500 with the 6.5 Detroit diesel and 4l80. Only issues it had was the torque converter. At least until 6 months after getting it the crank decided it no longer liked being free and locked up going down the road. Interestingly enough the underneath of the truck was splattered with oil which wasn't like it was before but there was no splatter on the road.
I’m gonna add a trans cooler soon too. That’s an interesting location. What about the plastic splash guard?
@@wouldntyouliketoknow1477 I'm going to cut my a little where the vertical indentions are, I've seen lots of ppl do it like that. It will probably be in my next video or two. Thanks for asking, good luck with your project.
Beautiful work
@@Matt-the-dragon87 thank you sir, I hope you have a awesome weekend.
Dont let the haters get to you, being able to see something in your mind and have an idea then fabricate it into something functional is a skill to be proud of my friend.
@@SniperSpade I appreciate you taking the time to say something like that, but I will never let anyone on here get me down. I've built ships and things travel all over the country. Thanks a million my friend, I hope you check out the channel and have yourself a great weekend. Hope to hear from you again
Won’t dirt and mud get into it? Bad place for debris to get into it
@@MrMagnum7220 thanks,thats true but it's won't see any mud, it's more of a fun/race truck for nice days you know. I'll have to keep my eyes on it, good point though. I appreciate your comment and hope you have a great day