วีดีโอ

No... the led resistor and volt regulator are already exist in the electronic board.

رحت التوفيقية محل سوزوكي سنتر لاقيت عنده اخر واحد.

It costs me around 2700 EGP at the time of installations

Hello the SMD LED Voltage is : 2.8 - 3.4 V.

Most welcome...... I Google the remote type you mentioned with "car remote lb-405" in the search. Google images show the remote diagram and it's the blue wire with negative polarity. So the diagrams in the video will not help you because it's for positive polarity trunk opening wire. So to explain to you further please let me know what options you need to go for it (link to ignition, use interior switch to open the trunk)

@@sherifworkshop3783 Is it that simple?? hahaha and i was trying to add relay to the system so i can have both functions? Yep two pins the button have so i'll connect the blue wire to the the possitive assume and it should work right? I'll test it tommorow and i will let you know if it works! hope it will cause i have tried so many things with relay and still no result... lets see then ;) thank you Very Very much my friend :) :)

Please first confirm that the button wires as I explained above that one of them goes to ground point if so then it is as I explained. If not then wait and don't connect any wires. I want to confirm that the button is wired on negative polarity side and not on positive side. If the button is on positive polarity side then the blue wire can't be connected directly without relay.

The diagrams in video may not be applicable to your case because of the different trunk opening wire polarity coming from the module. The pink wire is for siren, you shouldn't use it for trunk opening. The manual for your module said you need to hold trunk button for 2 seconds. Did you checked the polarity of the trunk button you have. Can you test the blue wire with AVO or multimeter to assure it has signal when you hold remote button.

@@sherifworkshop3783 Sherif my friend finally it worked! 86 and 30 are both connected to battery positive! To 85 goes the blue wire and to 87 goes the positive from the actuator! Only one thing left how can i add the button to the system??

علي حسب موديل العربية ونوع لوحة العدادات اللي راكبه

@@sherifworkshop3783 نوع العربية سوزوكى التو ٢٠١٥

مش هتنور علي حد علمي لان الليد مش موجوده في وحدة العدادات لاكن الكنترول هيشتغل طبيعي

Thanks sir

Thanks sir

It's a universal kit, I think it will work

No. The unit itself doesn't support this option

I guess you need to see each one of them to determine which one will fit. I think all are 5 pins

I don't have the car now (I sold it). Sorry I can't make video on it for the moment

You can search by "t5 led" "dashboard led" "t5 dashboard led".

To disassemble the needle, rotate counter clockwise and pull

I think no. It will be very difficult

I sold the car. Sorry I will not be able to make videos on it. But the concept is the same but only for two doors

I can't post links. It does not work. You can search on any online store like AliExpress for power windows regulator kit

@@sherifworkshop3783 ok sir but can i chat with you on insta or Facebook ??? I am also car enthusiast so please support me !

@@sherifworkshop3783 sir i put 1 link here th-cam.com/video/uzMVuTPitxg/w-d-xo.html you use this type of power window kit ???

No I didn't use this type of power window kit because it was not available on the market. But you can use it, just be sure you buy a good brand

I changed the whole regulator. It's not durable to install only motor on the manual regulators. It requires many modifications that makes it not reliable. But universal kit could work (I didn't try it myself) just be sure that you have a good brand