- 40
- 131 026
Avenger Grip
เข้าร่วมเมื่อ 12 ม.ค. 2021
Welcome to the official Avenger You Tube Channel
Avenger products have been designed to fit the bespoke needs of the photo and cine market. The range includes stands, clamps, couplers, light controls and accessories all designed to match the strict quality standards and performance levels required by the motion picture industry. Product quality is the hallmark of Avenger, which can withstand extreme use, rough atmospheric conditions, very high stress and heavy payloads.
Avenger products have been designed to fit the bespoke needs of the photo and cine market. The range includes stands, clamps, couplers, light controls and accessories all designed to match the strict quality standards and performance levels required by the motion picture industry. Product quality is the hallmark of Avenger, which can withstand extreme use, rough atmospheric conditions, very high stress and heavy payloads.
Avenger Super Wind Up Stand Stainless Steel B6040X
The Avenger B6040X Super Wind Up stand with wheels is built with a stainless-steel column, stainless-steel legs, chrome steel risers and geared column. The B6040X is constructed of 3 sections and 2 risers which extend simultaneously at 4.4 cm per handle turn.
The top tube houses a junior socket which is 28 mm/1 1/8 in and also has a built in ring to add tie downs or wind brace kits. An internal safety cable system ensures simultaneous retrieval of all sections.
The B6040X also features a rapid and fine adjustment leveling leg. It has a maximum payload of 80 kg/176.4 lbs and can raise up to 386 cm/152 in. It also features 1 step on the column to make easy adjustments when loaded.
Stand available without wheels:
Product Code: B6040XK - Stand without wheels
Wheels available separately:
Product Code: 474 - Wheels set 200mm with brakes
844/5000
Thumbnail
The top tube houses a junior socket which is 28 mm/1 1/8 in and also has a built in ring to add tie downs or wind brace kits. An internal safety cable system ensures simultaneous retrieval of all sections.
The B6040X also features a rapid and fine adjustment leveling leg. It has a maximum payload of 80 kg/176.4 lbs and can raise up to 386 cm/152 in. It also features 1 step on the column to make easy adjustments when loaded.
Stand available without wheels:
Product Code: B6040XK - Stand without wheels
Wheels available separately:
Product Code: 474 - Wheels set 200mm with brakes
844/5000
Thumbnail
มุมมอง: 326
วีดีโอ
Avenger Strato Safe Stand B150-1
มุมมอง 4432 หลายเดือนก่อน
The Avenger B150-1 Strato Safe Crank Up Stand is a beast of a stand with exceptional performance. This stand has a humorous industry nickname and it is used commonly by grips and gaffers worldwide. It is built in Chrome Steel and Gravity Cast aluminium, comprising of 4 Risers and 5 sections. This stand surpasses industry requirements for safe operation and is part of the Strato Safe family that...
Avenger Steel Combo Stand 35 A1035CS
มุมมอง 2132 หลายเดือนก่อน
The Avenger A1035CS Chrome Steel Combo Light Stand with Levelling Leg is a heavy duty stand capable of holding a 40 kg/88.2 lb load at a height of 350 cm/138 in. This chrome steel combo light stand has a combo style or universal type top which incorporates a 28 mm/1 1/8 in Junior Receiver and a built-in retractable 16 mm/ 5/8 in non-threaded baby pin. The built-in levelling leg allows for easy ...
Avenger Overhead Stand A3058CS
มุมมอง 2352 หลายเดือนก่อน
Avenger overhead stands are built in chrome steel, incorporate a dual purpose head that has a 4 1/2 in grip head and 28 mm/ 1 1/8 in receiver. The style of these stands are nicknamed ''Mombo Combo''. The Avenger A3058CS is a 4 section, 3 riser stand and is very popular in supporting overhead frames, Avenger fold away frames, butterflies and butterfly pipe kits. Max height on this stand is 579 c...
Avenger MP Eye Coupler with 28mm TV Spigot C4461-1
มุมมอง 1302 หลายเดือนก่อน
The Avenger C4461-1 LP MP Eye Coupler grid clamp comes supplied with a 28 mm(1 1/8'') TV spigot. Commonly referred to as a Big Ben Clamp, this popular MP cheeseboro clamp has a wider clamp range than the LP clamp and is ideal for many rigging systems, truss and entertainment configurations. The lower jaw has a special flattened shape which helps in the sizing of this clamp and the increased fle...
Avenger MP Eye Coupler with 16mm Spigot C4462-1
มุมมอง 1212 หลายเดือนก่อน
The Avenger C4462-1 MP Eye Coupler grid clamp comes supplied with a 16 mm(5/8'') baby male spigot. Commonly referred to as a Little Ben Clamp this popular clamp is ideal for many rigging systems, truss and entertainment configurations. This popular MP cheeseboro clamp has a wider clamp range than the LP clamp and is ideal for many rigging systems, truss and entertainment configurations. The low...
Avenger Junior Roller Stand High Low Base A5042CS
มุมมอง 1702 หลายเดือนก่อน
The Avenger A5042CS Junior roller stand low base in chrome steel, is a triple riser steel rolling stand capable of handling loads up to 40 kg/88.2 lbs at a max height of 420 cm/165.4 in. This all-steel built stand includes a low rolling base, A9000N braked wheels, has 4 sections and 3 risers. The combo top incorporates a junior receiver 28 mm/1 1/8 in receiver and a retractable 16 mm/ 5/8 in ba...
Avenger Junior Combi Boom Stand A4050CS
มุมมอง 3232 หลายเดือนก่อน
The Avenger HD combi boom junior stand in chrome steel is the most rugged combi junior stand that Avenger makes! It has 4 sections, 3 risers, 1 levelling leg and a combo top attachment. When used as a traditional light stand it reaches a maximum height of 500 cm/196.9 in and has a 30 kg/66.1 lbs capacity. The combination rugged built-in pivot clamp converts this stand easily into a boom! When t...
Avenger Junior Pipe Clamp C100
มุมมอง 1172 หลายเดือนก่อน
The C100 Junior Pipe Clamp has a built-in 28 mm/1 1/8 in receiver. Capable of handling all junior pins, this gravity cast aluminium clamp has a Tommy Bar locking handle and requires no tools when attaching to truss or pipe grids. This clamp has a capacity of 250 kg/551.2 lbs, the jaws clamping range is from 20 mm - 55 mm/0.78 - 2.16 in and has an added safety cable with pin to secure junior pins.
Avenger Grip Head D200
มุมมอง 2152 หลายเดือนก่อน
The Avenger D200 Grip head is an industry leader in terms of its strong locking power and design. The D200 2 1/2 in/6.35 cm grip head equipped with a non-slip brake pad disc similar to what is found in the automotive industry provides superior locking power to hold scrims, floppies, flags and cutters in various positions. The D200 uses an aluminium T-Handle with a comfortable T-Top cover to pro...
Avenger On Set - Sean Murphy, Documentary Filmmaker
มุมมอง 2862 หลายเดือนก่อน
Independent filmmaker Sean Murphy reveals some personal insights into documentary filmmaking and his approach to working with light to tell stories. I'm Sean Murphy, I'm a documentary DP based here in Southern California. So the reason I think documentary really pulled me in, and I watch a lot of documentaries, I really like the human aspect of those stories and you just kind of peep into their...
Avenger C Stand Fixed Base 40in Chrome Steel A2033FKIT
มุมมอง 1562 หลายเดือนก่อน
The Avenger A2033FKIT in Chrome Steel silver comes complete with the A2033F 40'' 3 Section, 2 riser Fixed Base Chrome Steel C-Stand (max height of 330 cm/129.1 in) a silver D200 2 1/2in grip head and a silver 40'' D520 Grip Arm. Avenger C-Stands feature captive locking handles that do not vibrate free are triple chrome plated and perform in the most demanding environments. Avenger C-Stands chro...
Avenger Barrel Clamp and Knob C345K-1
มุมมอง 1782 หลายเดือนก่อน
The Avenger C345K-1 Barrel Clamp in silver is made with gravity cast aluminium, has a built in 28 mm/ 1 1/8 inch junior receiver, a 16 mm/ 5/8 inch baby pin with a 1/4'' threaded top and a 16 mm/ 5/8 inch receiver. This barrel clamp is capable of mounting pipes or tubes ranging from 42 - 52 mm/ 1.65 - 2.05 inch and easily locks into place using a T-Knob. The baby attachment can support loads up...
Avenger Baby Roller Low Boy A5017
มุมมอง 2312 หลายเดือนก่อน
The Avenger A5017 folding base roller baby stand with 3 sections and 2 risers, features a lower steel column and 2 risers in Aluminium. The max height is 170 cm/66.9 in and is capable of holding loads up to 12 kg/26.5 lbs. This rolling braked base stand is great for holding lights, grip heads and other grip accessories and is very popular for use in both studio settings and on location. The low...
Avenger 40in Turtle Base C-Stand Kit in Chrome Steel A2030DKIT
มุมมอง 2012 หลายเดือนก่อน
The Avenger A2030DKIT in Chrome Steel silver comes complete with the A2030D 40'' 3 Section, 2 riser Turtle Base Chrome Steel C-Stand (max height of 300 cm/118 in) a silver D200 2 1/2 in grip head and a silver 40 in/102 cm D520 Grip Arm. Avenger C-Stands feature captive locking handles that do not vibrate free are triple chrome plated and perform in the most demanding environments. Avenger C-Sta...
Avenger 40in Turtle Base C-Stand Kit in Black A2030DCBKIT
มุมมอง 1482 หลายเดือนก่อน
Avenger 40in Turtle Base C-Stand Kit in Black A2030DCBKIT
Avenger 40in Sliding Leg C-Stand Kit in Chrome Steel A2033LKIT
มุมมอง 3172 หลายเดือนก่อน
Avenger 40in Sliding Leg C-Stand Kit in Chrome Steel A2033LKIT
Avenger 40in Sliding Leg C-Stand A2033L
มุมมอง 1862 หลายเดือนก่อน
Avenger 40in Sliding Leg C-Stand A2033L
Avenger On Set - John Vogt, Documentary Filmmaker
มุมมอง 2472 หลายเดือนก่อน
Avenger On Set - John Vogt, Documentary Filmmaker
Learn more about the 'Avenger Grip Lighting catalogue' app!
มุมมอง 593 หลายเดือนก่อน
Learn more about the 'Avenger Grip Lighting catalogue' app!
Avenger - Long John Silver heavy duty wind up light stand - B7057FF
มุมมอง 2773 หลายเดือนก่อน
Avenger - Long John Silver heavy duty wind up light stand - B7057FF
Avenger 40in fixed base C-Stand kit in black - A2033FCBKIT
มุมมอง 3913 หลายเดือนก่อน
Avenger 40in fixed base C-Stand kit in black - A2033FCBKIT
Avenger Banshee B7034FF-2 | Heavy Duty Wind Up Light Stand | Avenger Grip
มุมมอง 1K8 หลายเดือนก่อน
Avenger Banshee B7034FF-2 | Heavy Duty Wind Up Light Stand | Avenger Grip
Improve your film work with lighting kit
มุมมอง 70710 หลายเดือนก่อน
Improve your film work with lighting kit
Bro, well done. Very concise and informative. Clearly demonstrated and explained.
Super helpful! Thank you!
This was an amazing guide and literally all I needed to get upgrade my simple light stand.
I think this is the classless video,, Because he doesn't mention the brand name link
Great video, thanks
C stand brand and model name pls
👏🏻👏🏻👏🏻
Finally a complete guide well explained 🙏🙏 btw, to add weight on legs of any kind of stand, I now simply use a speed clamp upsidedown (or any pro clamp with a long enough pin) and slide small gym plates on the bar. Way cheaper than the pumpkins, clean, compact, available anywhere 😉
I found the idea of using a junior-baby pin converter in the grip lock to be brilliant, thanks. Just surprised to hear you say they are $8 there - 4-5x that price here in the UK and even on Ali Express they are like $25. I need a friend in the US to post me one lol!
You’re the best at teaching c-stand fundamentals on TH-cam! Thank you and happy shooting!
Jesus bless you man
Do you use sand or other infill for the sandbag?
I was totally using my C-Stand wrong. Thanks for the informative video.
great content, thanks!
I’m late to this party, but I just had to comment that you are one of the finest teachers I’ve ever had the pleasure to encounter. Many thanks from…a teacher 👏
Great video... really good stuff!!! Thank you for this.
So I’m thinking about getting a C-Stand for my light but I was wondering if it would make sense to get a second one to replace a tripod for my camera (phone). It seems like a second C-Stand would be more useful than a tripod. I plan on doing a lot of overhead shots so the arm would be nice. (I have the space and won’t be traveling with my gear.)
I literally gasped when you showed how to use the reflector like that with the c stand... thank you so much for everything in this video, it was exactly what I needed!
Are the gloves that the colleagues are using for sale? Thank you!
We hope you enjoyed the video! Thank you for your message, unfortunately we do not sell the gloves.
This video rocks 🤘 love your sense of humour.
Excellent
Best of the best videos on the internet for C Stands. Thanks a lot. Greetings from Bangalore, India
Were there any cue cards or a teleprompter, or was this all off the rip? Awesome detailed explainer with great natural delivery.
Hello @calebchin - no cue cards nor auto prompters were used for this video, Seth is a very talented educator 🙏
That's a big fella! 😅
This really might be the best gear video ever made
Awesome. Thank you. I knew none of that as I am a newbie to more a professional home studio set up. Just fabulous.
Please review your butterfly.
thanks for the name of the coffin nail i was looking for that
It’s a baby pin doesnt seem like I can bring back the coffin nail nickname like I hoped haha. Ah well can’t control what catches on
All your equipment is very, very good, but very expensive, not everyone can afford it.
❤❤❤
Finally a p@rn channel for grip geeks “Only Stands” loving it!!
Great to have a catalogue like this on my phone.
Great tutorial
Thank you
go Padres!
What a great video!
Thank you!
Very Nice!
this filled in all the little gaps i needed to know.
We all have gaps glad it was helpful
Wow😍🔥... That's a beast right there
That's cool .. I'd love to test out and review one of your C STANDS on my channel❤️
I learn a lot for this ! Thanks mate 🦾
You’re so welcome glad it helped
very well explained. good stuff!
🙏🫀🙏 glad it was helpful
Thank you so much for this amazing video. Clear, informative and also entertaining as you always are. Big fan
Appreciate you thank you
Very helpful, thank you! 🙂
You’re so welcome
How do you take the lock off knob completely off? I’m trying to clean it because its not rotating easily, but it seems the all of the knobs only come out to a certain length and then stop
money
Good
0:13 0:14 0:15 0:16 0:16 0:16
Great video, what boom arm adapters do you need for different items? I may want a mic on the end, or a camera, or a light. I know a C stand might be over kill for a small mic, but I already have other stands and tripods, but I might as well get a more versatile boom stand that can support more weight giving me more options.
There’s so many options really what you need to figure out is what you’re putting on that arm. What mount style it has and of course how heavy it is will also dictate the type of arm and stand
Such a helpful video. Love this guy too!
Thanks so much 🫀
Awesome video - explained as it should with simplicity.