วีดีโอ

@ubs220 it's all good mate and yeah just sand it down so it's not shiny you don't have to remove all the paint but as long as it nit shiny so your primer can stick to it

@Garage_Four_Twenty nice one bro, where is all the peds gone ? 0 typhs or gilera on gumtree I know it's been 10 years since every1 was on kitted peds i used to have a gilly and typh but I want to buy one and do it up where should I be looking

@ubs220 yeah mate tell me about i got into the late, there's still a few kicking about....have your tried FB Marketplace

@@Garage_Four_Twenty nope never thought they would be on fb market il check it out worst comes to worst il just have to hit up ace cafe if thats still a thing and ask around 🤣

@ubs220 yes mate I'd say FB market place would be the one and only place that's likely to sell them mate I search all the time and thats where I have my most luck, and yeah ace cafe still pops but not like it used to be they've now removed the roundabout by the arches

@backwheelaj7956 is that the same for 50s I thought that was only 125s

You'd have to change the wiring loom or have your 50cc loom adapted also need to change the engine mount, either get a whole 125 mount welded in or shave a 50cc mount ideally you'd want the 125 mount

Nice one mate they are cracking little motors if that's what you mean

@@Garage_Four_Twenty Ye he's in some group that does them up👍❗

When you say spooge? Like oil coming from the exhaust? Outlet? If so it's worth maybe taking apart and inspect and replace any broken gaskets or seals etc

@@Garage_Four_Twenty Yh oil an fuel between bore and stub just gone to take it off an it’s not even tight lol so I’m guessing it’s just vibrated loose

The typhoon frame had to be cut, I'm unsure about the skipper I do know they have larger forks from factory, so might work

@@Garage_Four_Twenty ok thanks ✌

@sergiol.m6973 no worries anytime

Appreciate it mate

@@Garage_Four_Twenty you’re welcome 🤙🏻

Appreciate it mate 👌

That's probly something I wouldn't do, try a Typhoon or a mk1 skipper loom

You dont have to convert the loom it plugs up , just have to maybe re set where the wires go

Any typhoon 125 frames in south london hit me

@savagereviews3673 modern scooters in New malden has a couple but they ain't cheap

Nice 1 on reply ,i got this atm check DST Nrg 183cc youtube, need 125 frame though only down side

Hi the engine mount was equally cut down/ shaved either side so it could fit in between the big block engine bushes

​@@Garage_Four_Twenty, thanks. Did you make bushings between the silent blocks and swing arm, so that the motor doesn't move?

@@АлександрНикифоров-х2ю no just standard engine bushes and standard engine frame bushes

@@Garage_Four_Twenty thank u so much

@@АлександрНикифоров-х2ю no worries anytime

What exhaust is it, and how comes it wouldn't fit my 125 was a direct fit had to space it abit on the bracket part

@@Garage_Four_Twenty it is a standard pipe, it doesn’t fit because of the subframe. Hits it in some way that the bow can’t be screwed on to the exhaust port

@tomkranenonk3163 have you got a typhoon 50cc mount or another, also try bolting the downpipe to the exhaust then mount as a whole it's fiddly but doable, I also should of mentioned I chnaged the studs and nuts on the cylinder for a m8 Allen type bolt because it's a smaller head and doesn't require a 13mm hex

@@Garage_Four_Twenty typhoon 50cc subframe and turned it around so the head can fit. I’ll try and fit the block with the downpipe already on. Doubt it will work but we will see, thanks.

@tomkranenonk3163 make sure the subframe is the right way up

I had to shave the frame down, I showed it and talked about it a little in part 2 I think

Appreciate it brother

I'll take a look, thanks for your advice appreciate it 👍

np man keep doing your thing@@Garage_Four_Twenty

Thanks mate appreciate it

@@Garage_Four_Twenty no worrys u no u have actually convinced me to stop the gilly build and swop to a typhoon build also i see u said about the grab rail. Depending on where u live have u thought bout having it dipped in acid to strip it

@@Garage_Four_Twenty im not sure if its any use or how far bromley is from you br1 my brother in law owns a alloy wheel referb company he might be able to give u some ideas on how to sort the grab rail

I was actually thinking about getting the side case and grab rail done in chrome like a dip rather than polished, does he do that

@@Garage_Four_Twenty not dipping but he powder coats u got insta and ill forward u the site

It probly could but you've got to think the gilly is liquid cooled, so there's plugs for that side of things, also the indicators are different locations, the plugs will be different also its definitely not just plug and play, the closest I've seen to a typhoon loom is a mk1 skr / skipper loom

@@Garage_Four_Twentythanks

The car and engine being sold

Nevermind, heard u say which ones right after i commented. Are they plug and play on a typhoon?

@@keeaan6895 if you watch through you'll see where I mention about cutting the frame to run the vx forks, the runner St forks are plug and play but you can only use one collar on the stem rather than two

Hi mate they’re minilites, 7x13 ET-7

@@carvideos6163 cheers mate for replying mate iv just managed to get my hands on a 340 gl wich I’m looking a modding into a fun street car 😊 Would like to put a Volvo red block in it so a b200et engine

Appreciate it mate, just a little tinker yesterday, engine needs to come out the black bike, will probly be documented, so another will be uploaded 👍

Thanks mate I appreciate it, and yes it's hard to find content, my Mrs laughs when I sit there and watch the foreign stuff I may not know what they are saying but I know what work they are carrying out 👍

@@Garage_Four_Twenty Thats it mate, you learn with your eyes all the same 👍 . Plus a lot of foreigners are bilingual so about time we all learnt some other languages anyway 😅

Thanks for the feedback, I'm currently just recording on my phone if I get enough interest in the videos I'll possibly upgrade to a camera or something

Thanks 👍

Currently on a standard 125cc 2t crankshaft, with new bottom main bearings, there was minimal play in the crank so was ok to use in my opinion 👌, updates coming soon 👍

thx@@Garage_Four_Twenty

Hi mate some of the 125 engines are actually small drum 110mm drum so some actually fit, make sure it's 110mm rather 100mm

@@Garage_Four_Twenty i got the big drum brake . the skipper rear wheel feets ??

I've also wanted to put a mc1 front panel on myself but have never got round to doing it