- 8
- 1 113 893
Lebecky Restoration
United States
เข้าร่วมเมื่อ 8 เม.ย. 2020
Hello. My name is Alex Lebecky.
On this channel I will upload videos about some things that I will do with my own hands.
I don't like to talk a lot. So I'll work without talking))
Please, subscribe to my channel. I will try to work for you! Thank's.
On this channel I will upload videos about some things that I will do with my own hands.
I don't like to talk a lot. So I'll work without talking))
Please, subscribe to my channel. I will try to work for you! Thank's.
Rusty CAR BODY Restoration / Front Fender (all painting steps)
In this video, I replaced and painted a rusty Front Fender on a car. I found the same fender from another car and decided to paint it following the technology of body repair!
I studied all the painting processes for a long time! I think it turned out great! I used a spray gun for the first time!!))
These are the cheapest spray guns from China! Models W101 1.3 mm. and 1.8 mm. Each of them costs about $ 30
I made the Air Compressor Water Separator myself - th-cam.com/video/Wk4lc7wziEg/w-d-xo.htmlsi=BY-pWY3sS_WOnYn6 Without it, you will not be able to paint well!
I am very pleased with the result! Please write what you think? I hope this video will be interesting and useful.
Thanks for watching! Good luck!
I studied all the painting processes for a long time! I think it turned out great! I used a spray gun for the first time!!))
These are the cheapest spray guns from China! Models W101 1.3 mm. and 1.8 mm. Each of them costs about $ 30
I made the Air Compressor Water Separator myself - th-cam.com/video/Wk4lc7wziEg/w-d-xo.htmlsi=BY-pWY3sS_WOnYn6 Without it, you will not be able to paint well!
I am very pleased with the result! Please write what you think? I hope this video will be interesting and useful.
Thanks for watching! Good luck!
มุมมอง: 603
วีดีโอ
Restoration with Stick WELDER and Paint ROLLER.
มุมมอง 2.4K9 หลายเดือนก่อน
I did this restoration in August 2021. It's 2024 now! Everything is fine with the car, you can see for yourself Full video: th-cam.com/video/9BVM8ujCGFU/w-d-xo.html (Rusty CAR BODY Restoration) Thank you for watching.
Soviet Motorcycle Restoration (Dnepr) + Easy Tuning
มุมมอง 2.1K2 ปีที่แล้ว
When I was 16 I restored an old Soviet motorcycle Dnepr. It was 2005. I didn't have a video camera at the time. I did not have sufficient skills and money at that moment. I hope you enjoy my work. Thank you for watching!
WIPER BLADE ARMS Restoration
มุมมอง 1.8K2 ปีที่แล้ว
In this video, I restored the rusty wiper blade arms from my car and painted them with black semi-gloss spray paint. I made rust removal with a very effective composition, which you can see in the video. I primed the 2k epoxy primer in a way that you have not seen anywhere else!))) I am very pleased with the result. Now my wipers look like new! Please subscribe to my channel and leave feedback!...
AIRBAG SPIRAL CABLE - REPAIR
มุมมอง 20K2 ปีที่แล้ว
In this video i repaired the airbag spiral cable from my car. My car had a non-working horn and airbag error. I did this repair a year and a half ago! Everything works! Thank you for watching. Please give me feedback which restorations would you like to see?
Rusty CAR BODY Restoration. I used MMA inverter (Stick WELDER) + Paint ROLLER
มุมมอง 1M2 ปีที่แล้ว
This video shows the entire process of restoring the rusty part of the car. I performed metal welding with an MMA inverter. The painting was done with a construction roller without professional equipment. This car two years later (3 winter): th-cam.com/video/hBYmDf0SoyU/w-d-xo.html I'm happy with the result! Thank you for watching.
I made a 4G LTE antenna (1800 MHz) with my own hands. Internet works!
มุมมอง 63K3 ปีที่แล้ว
In this video I will show you how I made 4G antenna with my own hands. The Internet did not work at all before! Distance to the station of the mobile operator is about 13 km (about 8 miles). This antenna is designed for 1800 MHz frequency. If you like this video, please click like and subscribe to my the channel! p.s. English is not my native language, but I will try to learn it. If I made a mi...
It has been a long time Alex how are you good friend ? Are you happy in your new workshop ? An excellent demonstration of your new skills .Another Video soon please and happy christmas to you .
Hi Mark! I'm so glad you wrote! Honestly! I'm fine, thank you! How are you? I hope you're fine too!? I had to go through a very difficult period in my life. Some problems still remain! I'll work on them! I've been renovating this garage all summer to record this video!)) I'll try not to disappear for so long. And record videos not only with the car! Happy christmas to you too😉👍
How on earth do you know what metal for what and where to get the right metals, this does not look like work for the average joe😅 great job tho, but you wont get far if you dont put the tank bk on 😂😂😂
Hi! At that moment I used the welding machine only twice! Honestly!😉 I picked up the metal from old pieces that I found in my garage! I only had to buy the outer cover!👆
@@lebecky_restoration impressive
actually great work. But if you don't use a rust converter, the rust is guaranteed to come back. Before you paint it, the flash rust must be treated with rust converter
Thanks for the feedback! I'll take that into account in my future work!😉👍
Please subscribe to my channel and share this video with your friends! Thanks for watching!😉
Man, you are not fixing a car! You are crafting an art piece. I bet the rigidity and strength of the unibody dont meet but exceet the factory specs. Bravo!
Thank you friend for your comment! I wish you all the best! Good luck😉👌👍
What is the type of iron?
I made this antenna from regular steel! After a year it got a little rusty but it works fine😉
Has anyone made this? Does it work?
Hi, should i make 2 of these if my router has 2 antennae and suports MIMO?
No 1 is enough
I also think that one is enough👌
How the fuck is buddy doing with stick and not burning through
After watching this I think I’m going to sell my truck
Всё нормально сделано , но зачем электродом варить , нет полуавтомата ?
They didn't have mig welding in the 50s through the 70s so stick welding was the only way
Well he must be pretty good
Thank you!😉👍
Ενα Like σε οσους θυμησε το ΣΚΥLINE για οσους ξερουν! 😂😂
6013 1.6mm 50 60 amp
Can you tell me the grade of electrode uses and approximate amperage? Is this 6013?
Hi! In this video I used 2.0 mm electrodes, but I think that 1.6 mm would be better (I could not buy 1.6 mm) I did from 40 to 60 A. Where I used thick metal (1.5 -1.7 mm), I set about 55A. Where I used thin metal (the outer panel is less than 1.0 mm.) I reduced it to 40A. But this device, has an easy start and at the beginning of work, it increases the current strength automatically. That is, even if you set 40 A, then in the first second, the device can increase even above 80A!( There's nothing you can do about it. This is a device with an easy start and such, probably 95%. I worked just like that. If you manage to find a device without an easy start, then I hope that it will be possible to install 40A for example and it will be 40A. And weld very fast! p.s. Really, I am not a professional welder. I don't have much experience. Before this, I only welded metal fence for the house (3 days)))) Good luck😉
Must be a labour of love, I thought I was bad. Taking out my wheel liners and descabbing my w203 rear arches. This is next level
Dnepropetrovsk
а что за желтая мастика? для чего она?
Dodgy that 😂
Everything is fine👌😀
Magnesium sacrificial anode to prevent rust so you do not have rust.
هل يمكنك ارسال النموذج والقياسات والتصميم❤❤❤❤❤
Imagine him with a HF 90 flux welder....lol he would be in heaven
Oh yeah😇👌
salem Thanks for this awesome antenna for the 1800 MHz frequency. I noticed while watching the video that the S parameter was 13.6. However, when you took the measurements with the slide rule , the S parameter was 10.3. The same goes for the second feed, where the S parameter was also 10.3. So, I'm wondering if the S parameter is 10.3 mm or 13.6 mm I need the answer because I made one based on S=13.6 thank you
Hi friend! Everything is correct, it should be 13.6 mm. On my slide rule 0 is not from the very beginning and that is why it seemed to you that there were 10.3 mm.
what the name of the yellow stuff ya put on the car
It's 2k epoxy primer
What county this?
I saw your video a few years ago, im a at home fixer myself, it doenst need to be perfect, i mean look at it, it worked 👍still a good job, and you can fix it up if it gets a little rusted again with not too many work, not so much work as you did before.
Thank you! I will try to release a similar video!)😉
Can i use food aluminium tin for it
I haven't tried it, but I think it should work
Nice work !! How much time did it take ?
I did this for 2 hours a day for about 8-10 days.
Nice work boy
Thank's😉👍
Aw3som3 work
Thank you for your feedback😉👍
A paint roller no way haha
😀😀😀
Nossa! Espetacular o serviço! 👏👏👏👏👏👏👏
What electrode did you use?
Hi! In this video I used 2.0 mm electrode, but I think that 1.6 mm would be better (I could not buy 1.6 mm)
what kind of cable did you use?
Hi! I used coaxical cable, 75 Ohm!
there will be a lot of women free they got no mate ...all gone to sleep
😢😢😢
А че, так можно было? Валиком навалил и сойдет
I'm Happy to see people like me ! repairing car with basic stuff :) Thank's for your video :)
Thank you for your feedback😉👍
Fantastic, what Rust Converter did you use? Cheers
I don't remember anymore my friend! The simplest converter that was sold in the store
What size of Threaded Bar you use 6 or 8?
8 mm
Да четко ты все сделал,подвалил,покрасил,продал!!! Благодаря твоим видео люди сами учатся ковырять свои машины! Спаниеле большое за ту информацию которую ты даёшь,а хейтеры и умники идут на…..
Parabéns pelo seu reparo, você fez um excelente trabalho meu amigo!
Obrigado👍
good day, how much will such a job cost?
I did this work for myself, so it's free😀
To boost ur upload u probably need to change the BAND in ur modem, stop using 4g pendrive, try tp link-mr 6400 v5.3 or tp link-mr 600, i think is the best buy
Can I use f connector on mr 600 without any converter?
Isolate the second element from the rest of all !
Did you get better results doing that?
@@davosam1968 before that I got -94dbm but after that I got -80dbm on my Huawei B310s 927 4g Lte Device.
@@adnan-usman-1 second element is the second biggest right
Did you cut the side panel from a donor car or it is actually sold like this?
It is actually sold😉
Hello. I want to know how many millimeters is the thickness of that metal? I need to know
Hi! The thickness is the same as a coffee jar😀😉
perfect. I prefer mig wealder
I support👍😉
Видео вдохновляет меня. Заставляет верить, что я не рукожоп.