- 130
- 101 520
IMK
เข้าร่วมเมื่อ 24 พ.ย. 2022
Small car club/friends who work on cars and do other odds and ends.
ABF clone Build: EP2; Disassembly of the cylinder head…. Is that a Brick???
In today’s video, we finished the lower intake to my satisfaction with the P&P, And then we took apart the Head in preparation for its Port Job.
Yes I used a brick to smack the springs down to remove them, dunno what happened to my hammer hahah. Use what you can. Will have to upgrade the tools at some point..
Music: Happy Ukulele
Musician: Marphologiya
:
:
#cars #volkswagen #vw #automobile #carchannel #import #8v #abaturbo #mk2 #mk3 #passat #passatwagon #passat35i #16v #abfclone #abfclonebuild #16vturbo #16vt #carbuild #builtnotbought #vr6 #vr6swapped #shadetree #novicemechanic #carevent #carlover #project #projectcar #germanautomobile
Yes I used a brick to smack the springs down to remove them, dunno what happened to my hammer hahah. Use what you can. Will have to upgrade the tools at some point..
Music: Happy Ukulele
Musician: Marphologiya
:
:
#cars #volkswagen #vw #automobile #carchannel #import #8v #abaturbo #mk2 #mk3 #passat #passatwagon #passat35i #16v #abfclone #abfclonebuild #16vturbo #16vt #carbuild #builtnotbought #vr6 #vr6swapped #shadetree #novicemechanic #carevent #carlover #project #projectcar #germanautomobile
มุมมอง: 41
วีดีโอ
The Start of my ABF clone. P&P the manifolds.
มุมมอง 15816 ชั่วโมงที่ผ่านมา
Here we go, starting my ABF clone build for, either the B3 or the MK3 more than likely will be going in the wagon.. : : #cars #volkswagen #vw #automobile #carchannel #import #8v #abaturbo #mk2 #mk3 #16v #16vabf #abfclonebuild #abfbuild #vwgolf #vwpassat #16vturbo #vw16v
Will it run? R32 content.
มุมมอง 1.4Kวันที่ผ่านมา
First start back on the R32 after tearing it down. Will it run?? Stay tuned to see : : #cars #vw #automobile #carchannel #import #volkswagen #8v #abaturbo #mk2 #mk3 #mk5 #volkswagen #r32 #vwr32 #vr6 #vr6swapped #vr6awd #vwbuild #builtnotbought #germanautomobile
Nearing the end on the R dirty..
มุมมอง 38วันที่ผ่านมา
Getting close on the r32 : : #cars #vw #automobile #carchannel #import #volkswagen #8v #abaturbo #mk2 #mk3 #mk5 #mk5golf #r32 #08r32 #mk5r32 #mk5motivation #mk5lovers #mk5gti #vr6 #vr6swapped #awdvw #builtnotbought #projectcar
De’aigo started on his Old school, The mustang introduction.
มุมมอง 100วันที่ผ่านมา
Quick video on De’aigo’s mustang, which in the video he gives the background on it! Stay tuned! : #cars #builtnotbought #mustang #mustangcoupe #351w #restoration #mustangbuild #americanmuscle #carchannel #automobile #projectcar #ford #fordmustang #diy
R32 content+ My first Japanese vehicle, bonus footage at the end.
มุมมอง 7014 วันที่ผ่านมา
Got a new vehicle to add to the channel #cars #vw #import #volkswagen #8v #abaturbo #automobile #carchannel #mk3 #mk2 #r32 #viral #mk5 #mk5golf #builtnotbought #kawasaki #kawasakielimenator #elminator #nitrousaba #298cam
C&C; Charlottesville: 6/1/2024: “The British Invasion”
มุมมอง 25321 วันที่ผ่านมา
Took the Passat out to a semi local C&C today saw a lot of great cars!: : #cars #vw #import #volkswagen #8v #abaturbo #automobile #carchannel #mk3 #mk2 #cars #triumphspitfire #triumph #suburu #vwr32 #r32 #nissan #chevrolet #bmw #ford #mustang #charger
USPmotorsports Cats and DP unboxing.
มุมมอง 7928 วันที่ผ่านมา
Unboxing of the High flow cats and Downpipe : : #cars #import #volkswagen #vw #8v #abaturbo #automobile #carchannel #mk3 #mk2 #r32 #vwr32 #uspmotorsports #vr6 #builtnotbought #carbuild #vwbuild
Say no to crack(s), I removed the plastic crack pipe..
มุมมอง 14928 วันที่ผ่านมา
Waiting on my cats should be here in the next couple days and we can progress on the R32.. : #cars #import #volkswagen #vw #8v #abaturbo #automobile #carchannel #mk3 #mk2 #mk5 #mk5golf #vr6 #vwvr6 #builtnotbought
CCFM; Culpeper Passats first Carshow
มุมมอง 146หลายเดือนก่อน
Took the Passat 2 hours away to a small little car show.. Some fire rides pulled up! : : #cars #import #volkswagen #vw #8v #abaturbo #automobile #carchannel #mk3 #mk2 #nissangtr #nissanskyline #toyotalauriel #jdm #suburu #mustang #camaro #nissan #bmw #e30 #bmwe30 #m3 #m3e30
Quick MK5 R32 content. How I feel.. WHAT PIECE OF GARBAGE
มุมมอง 345หลายเดือนก่อน
As last video, waiting on parts to feel comfortable enough to start putting everything back together, but, thankful and happy that I didn’t let it beat me.. #cars #import #volkswagen #vw #8v #abaturbo #automobile #carchannel #mk3 #mk2 #mk5 #mk5r32 #08r32 #mk5golf #vr6 #carbuild #ctsturbo #volkswagenr32 #r32
Took the Passat to its first VW car show, Bugout.
มุมมอง 598หลายเดือนก่อน
Quick walk around of the water cooleds at bugout87 we arrived late. But we’re still able to catch a few there.. : : : #cars #import #volkswagen #vw #8v #abaturbo #automobile #carchannel #mk3 #mk2 #mk1 #passat #passatwagon #carshow #bugoutcarshow
R32 and Urowagn Content.
มุมมอง 892หลายเดือนก่อน
Finished up the lower half of the Passat, and chipping away at the r32.. Waiting on parts! : : #import #volkswagen #8v #abaturbo #automobile #carchannel #cars #mk3 #vw #mk2 #r32 #08r32 #vr6 #awdvr6 #35ipassat #b3passat #passatwagon #passat #vw #builtnotbought #carbuild #cars #imported
Urowagn; Body work Upon body work..
มุมมอง 75หลายเดือนก่อน
Do not own rights to music in video(background) We got some work knocked out on the Urowagn : : #volkswagen #automobile #carchannel #cars #import #mk3 #8v #mk2 #vw #abaturbo #carbuild #builtnotbought #projectcar #carproject #passat #b3passat #35i
Valve cover reinstalled w/ new parts.
มุมมอง 61หลายเดือนก่อน
Reinstalled the valve cover on the #r32 still waiting on a bunch of parts to continue the reassembly.. : : #volkswagen #automobile #carchannel #cars #import #mk3 #abaturbo #mk2 #8v #vw #08r32 #vwr32 #vr6 #vr6r32 #builtnotbought #mk5 #mk5r32 #mk5golf #golf
Urowagn; Just a little bit of body work..
มุมมอง 194หลายเดือนก่อน
Urowagn; Just a little bit of body work..
It’s honest work Pt2. The fronts, Plus “custom” air box? The note is lovely!
มุมมอง 1192 หลายเดือนก่อน
It’s honest work Pt2. The fronts, Plus “custom” air box? The note is lovely!
Quick little Review on the Ultimos+ New wheels for the RHD Passat..
มุมมอง 1582 หลายเดือนก่อน
Quick little Review on the Ultimos New wheels for the RHD Passat..
EP4; Will it run, or will it catch fire again? Plus some plans for it in the future!
มุมมอง 3142 หลายเดือนก่อน
EP4; Will it run, or will it catch fire again? Plus some plans for it in the future!
Out with the old, in with the new, installing some Ultimos.
มุมมอง 1153 หลายเดือนก่อน
Out with the old, in with the new, installing some Ultimos.
Ep3; MK2 BUILD: Rewiring and removing charred items.
มุมมอง 963 หลายเดือนก่อน
Ep3; MK2 BUILD: Rewiring and removing charred items.
You ain't working, unless you breaking stuff😬 Good Content once again.
Just finding the weak spots hahah
Cleaned up Good... Definitely took some patience to do. Great Content Again Sir
Yessir, definitely need a little bit of patience! Hahaha
Mk5 sucks ass
That’s how I feel about the MK4
@@IMKMotorsports why doesn't that surprise me🎣
@@20vTurbae I’m yanking your chain I appreciate them all 😂😂. Some gnarly mk4s out there
The Mk4 headlights look like shit and the whole design is dated while the Mk5 is timeless even when it'll be a classic
@@brilliantradience 5s are for registered offenders man
That's a Nice Project
Déjà fait depuis lommmmmgteemps on piquet le vr6 dans les casse et on les monter sur des bon châssis des vraie châssis ❤❤😂
Good progress today and let's hope she's ready for start up... Fingers Crossed
Yessir! We’re getting there
351W !
Nice Bike Sir
Thank you!!!
R32 has a v6 in it mate
Yup 3.2 vr6 that’s what’s in it.
Hey man when you get a chance get the aluminum t-stat housing.
That’s definitely a good suggestion
Less of a issue of it cracking in the future
Is that like the second or third bolt you done stripped 🤔 Keep giving us good content.
The Metal VW uses for Allen heads and torx bits, is absolutely garbage hahah.. the exhaust bolts don’t count!
do you recommend a b3 wagon for a first car? I caught one 50km from my me for around 800$ and it doesnt have any rust and runs on lpg
Absolutely, they’re overly simple cars. And with my 15 Gallon fuel tank with the 1.8l SBI I’ve gotten close to 400 miles to the tank.. They’re roomy for the year that they are, you can lay the rear seats down for more room as well, not a lot going on with them. My only downside is(my model specifically) is SLOW you aren’t/wont win any races with the 8v hahah.. But I’d get a mechanic to look it over to see if it’s mechanically sound. Idk where you are located but Ik in the UK they’re quite strict on MOT, and due to age it may need ball joints or suspension components etc. But to make a long story longer, yes I’d recommend!
Another downside is they’re due to the age getting hard to find and if someone is parting one out they want an arm and a leg
i'm from poland and the inspections are quite loose with old cars i think. I'm looking for an oldschool roomy and comfortable car that won't break on me and is easy to repair, speed doesn't matter to me that much. The one i found is also a 1.8l petrol engine. I'm just counting that no one buys it before me. I want to put in on 3 spoke wheels and buff it.
i'm also looking for a car that is quite economical. in poland there are lots of parts that don't cost that much. second hand parts are easy to find, there are many broken ones. You can also order parts directly from Germany
They’re quite comfortable, i fit comfortably in it for me being 5’11 300lbs. I think you’d be happy with it, Ik I am!
Damn man you should have hit me up. I'm 35 mins from there.
Definitely should’ve, I was the only VW there 😅😅
I dig that beamer🤌🤌🤌🤌
E30 m3 German spec
@@IMKMotorsports video had some sweet rides on it
I wish I had gone now since there were several Members there.
It was still a good time, I got there super late and still enjoyed myself!
Hell everybody needs a Diego 🤣 Great Job once again Sir
Indeed we do!!
Rolling restoration. Good thing your buddy has some shop time for ya. Coming together. Interested in a glimpse at the underside
Yessir, he and I been buddies since high school and just clicked since, he don’t mind helping/teaching me and I don’t mind helping him when he needs it. As for the underside, from what I’ve seen it’s actually quite clean, a lot of the issues are surface rust. And the rockers are still pretty solid. A little squished but still decently solid. But when I put an exhaust on this unit I’ll film a video of the underside for sure!!
Good content once again. Thanks for sharing this with us. Keep up the good work 👍🏾
Looking good man!
Thank you boss!!
Great Job Sir... What is it YOU CAN'T DO 🤔😅 Keep us Entertained with the Good Content 👍🏾
I can’t weld hahahah 😝😝
nice how do you like it compared to stock, im thinking about getting an xforce for my mk5 r32, greetings from australia
It hangs a little low is my only complaints, BUT I throughly enjoy it over stock. And for the price point over competitors it’s solid, welds and piping look wonderful!
F950 RLY ✓ Taxed Vehicle F950RLY is Taxed Tax due: 1 October 2024 Incorrect tax status? ✓ MOT Vehicle F950RLY has a valid MOT certificate Expires: 31 May 2024 Incorrect MOT status? WarningIf you've just bought this vehicle the tax or SORN doesn't come with it. You'll need to tax it before driving it. Vehicle Details Vehicle make VOLKSWAGEN Date of first registration March 1989 Year of manufacture 1989 Cylinder capacity 1781 cc CO₂ emissions Not available Fuel type PETROL Euro status Not available Real Driving Emissions (RDE) Not available Export marker No Vehicle status Taxed Vehicle colour SILVER Vehicle type approval Not available Wheelplan 2 AXLE RIGID BODY Revenue weight Not available Date of last V5C (logbook) issued 19 October 2023 View the tax rates for this vehicle If you have the latest 11 digit reference number from the V5C registration certificate (logbook) you can view the tax rates for this vehicle. Details from UK
Almost there.
She's back looking Sweet 👍🏾💪🏾
No way a car from the UK is all the way in the US!! you don't see these Passat's here now. Hope you can get it sorted with the insurance, and fix it up and get back to enjoying the car 👍
Thank you, it was recently imported, and just put the VA state tags on it the day prior to this happening. It’s not going anywhere anytime soon!
@@IMKMotorsports That's good to hear, it's a it's a shame it happened but you'll get there for sure an it'll be looking better than ever. It blows my mind that a car that's been here in the UK all these years is now all the way there!! we've got a late MK4 Golf TDi Wagon that's been in the family for years and it keeps going. By the way I don't know if you know much about UK registration numbers/ licence tags, but the F is for the year of registration so with your Passat it's 1988/89. And the last two letters indicate where it's registered, I think yours is probably one of the London boroughs possibly. Also I don't know what service history you have for it, but you can check the MOT / yearly state inspection history of the car from its time in the UK. It only goes back so far as it wasn't computerized until the mid to late 00's, it's free too just Google UK gov MOT history check. Then type the uk registration plate in, and it'll show you all the MOT details. Will show the date of original registration too, you can check the car tax details on the UK gov website as well if that's of any interest.
This pisses me off for you. Glad you were able to get another Bumper especially how hard to find them. Keep it relevant my friend and I'm glad you are chill about this. I probably would have lost my S--t
I did the day of, I was boiling and I did unfortunately give everyone there a cussing out for about an hour or so.. not the best look on my part(quite embarrassing in retrospect) but it ain’t going nowhere!
Tough break. Bumper was pretty nice, best part honestly. Glad you’re not too super bummed
She was probably texting.
It’s just a weird situation where she was parked beside me initially, pulled out and done that. I just don’t understand why she cut the wheel so hard..
Nothing like a random guy giving you a compliment just makes your day...
Every time!
Shoot, you got a bunch a cars
Bunch of projects but one at a time haha
keep it up digging this
Definitely bro!
Nice Work and video Sir. Sounds Good too.
Thank you as always for the support! I really appreciate you!
Good Content and very detailed work.
Glad you liked it!
Hey bro where u get this spoiler
It’s at the beginning of the video boss! Mk3 Jetta
Pretty cool man
Hey, thank you! I appreciate it!
Got your nerves shaking 🤣 Great Content and Good Job
Thank you boss man! Definitely did hahah!
Essa frente é do passat Brasileiro 87 , é as lanternas do Voyage 94 ou e bem parecido
The Front is North America Jetta. 1984 Jetta GLi very similar to the Brazilian VWs down there.
I only get this when it's cold lol. My iac valve is old AF so it doesn't move quick enough to chop.
Now she R.i.P hahaha
@@IMKMotorsports yeah I remember..... Shit is booty. But that new Passat looking crisp!
Very cool. I'm also building my passat 35i B3 on my channel. Good to see another youtuber doing a B3
Just subscribed, I’ll stay tuned!
Great nose on this car! Beautiful!
One of the things that sold me on b3 is the nose!
Nice.
300zx cuttin fuel bad, sounds smooth though 🤙🏾
He just recently got himself a tune. He's been having issues with it since hes owned it.. it honestly would be a whole lot quicker even without the tune if it ran better with its age issues.. but hopefully, the tune helps out a lot..
@@IMKMotorsports no space in that engine bay either 😭
Like none, damn near better to drop motor to work on it.
What about the hole in the side of the filter ...does the spray help that?
You need to rinse from the inside, to blow all the dirt out When you spray from the outside, you're just pushing it into the pleats defeating the purpose.
If you listen to the video, I clearly say I've cleaned it once already... to me thats self explanatory.
Your reply doesn’t make sense, you are supposed to rinse from the inside out. That’s not self explanatory at all. Just someone trying to give you a tip no need for a snarky remark.
@dylannippard4636 it wasn't a snarky remark. Again, to me, it's self-explanatory to clean from the inside out. I cleaned the filter once before filming the video. I'm sorry I didn't film me rinsing from the inside out. To me, it's obvious you'd want to clean it from the inside out is what i mean by that🍻 cheers.
The girl in the pink car needs to learn how to launch.
that’s me!!!! lol 😆
It was fun seeing the ride boss!!
fwd?
Yes indeed
god that sounds so good... missin it right now while its getting paint and body work
It was definitely a blast to see and hear!
Wassup bro bro! How's life treating ya!
Can't complain my guy wbu?
@@IMKMotorsports I can always complain 😂. But nah fr just trying to live the dream 😂
@@vr6prodigy all we can do ain't it
❤my type of Jetta mk2 I love your setup