วีดีโอ

Just wondering about the rear cargo boot carpet. On the back wall was it just glued in place?

What are the 2 switches that are between the 2 window switches?(a circle and something else). I have a 79 that only has the 2 window switches , so I’m just curious. Thanks.

thanks for the video , i've got the same model 99 , where i can find some parts for it ? i really need help with that bro.

The stock wheels give it way more character

glad that’s not my dad

Installed a 2021 Premium radio on my 2020 Eco base, screen looks great, but the bezel won't stay lighted up (it comes on then off) does that constantly, all the buttons and knobs are non funcional, you press any of them and nothing happens, seems like the bezel is shot, will have to deal with the seller on that. other than that it was plug and play. If it wasn't for the bezel messing thing s up! took about 15 minutes to get it done.

what a sad sight

What exhaust is that😍

was any knocking going on before you replaced ?

Dude you killed it. I'm glad I watched your video. I just bought a 99 R1 for dirt cheap and want to basically do what you did. Ima blow it all apart and just start from ground up. Absolutely love the paint scheme.

Did he ever have a problem with his fuel pump not working from the male adapter when he turned the key on there's no power to the male adapter to turn the fuel pump on has he ever had a problem with that and how did you fix that?

The last thing I would ever do is put one back in... 😅

That airline is in need of repair!

Where you get those folding mirrors?

Link for the front turn signals?

I have an 86 and love the stock wheels. The wheels identify the year. The issue is finding tires... i mean i get it, updating to newer wheels make tires a non issue

Well did it work? How about a test drive?

How do you open it ?

Yo can you send me a Pic of how the vacuum lines go on the yami yfz 600r

What brand of carpet, I missed it?

Epic event!🔥 nice video thanks for sharing!!👏

I have a 96 with those but i wanted the lip in on the rear and front. Amazon had them for 183$ each

lol, check the horns/connections first.

I love working on old cars. All the computerized garbage of today is for the birds. Too expensive, too time consuming and too frustrating. Give me an old Ford any day.

adjust those carbs ! sounds very bad !!

I know this video was for the tail light but the front flushed turning signal; do you remember where you got it or the link to it. I got speedmatels but the wiring is a bit off

Can I bring my 1999 Yamaha r1 to you for restoration or have it towed

How much this kinda repair cost at the shop?

Literally my exact same color scheme!

You don't necessarily need to remove the bezel around the gauges to remove that cemter trim piece, you can work around it.

Really struggling to get the wiring right! Where do the yellow wires connect? They only go to the power of the blinkers? Or they go with the ground?

My 1988 cbr 1000f also had bad clutch replaced the clutch no bite in lever

Just the tip you should be also using JIS screwdrivers. Japanese motorcycles are all JIS

I just did a 1985 corvette & you don't have to remove the license plate. Just look at where the rubber bumper bolts on between the exhaust pipes. Remove the bolt. Near the pipes look up & see the back of the lights & pull the rubber out just a little & reach the tail light with Ease. I just did the driver side. Both lights on the same side are easy to get to. No bruise or scratch. Your welcome

I had a question, does the apple carplay actually work?

We’re those. chickens! 😂

My 05 kfx700 will smoke u guy's bikes, let's line em up!

I noticed on a shot that your airbox is sitting on top of your air conditioning pipe. Make sure you elevate that off there because it will rub it with through the pipe and cause you a lot of money.

What nerf bars you got

how much cost for cleaning carburetor ?

Thank you for your video sir

nice vette. I came for the porsche but this is a nice, casual resto

What happened to the oil cooler? And why run the bike without one? Also, you are missing some parts that go inside the oil filter housing, there is a spring and washer that go over the oil filter by-pass bolt before the filter goes on, it keeps the filter pressed against the block.

You can still buy new clutch baskets for this model, but they are EXPENSIVE, around 750 USD.

Forward to 16:39. Hint...they never get to the seals.

Hi was thinking about doing the swap had a question do I need to buy a screen and take the old one out and plug the new one in or do I also need harnesses?

I have an 81 c3 was the first yr for 2 stage paint. 2nd stage is clear coat. Kinda scratching my head I know your 82 has 2 stage paint and you just sanded through the clear coat. Just my 2 cents. Those c3 were hand painted and they all have blemishes just part of the charm. I wouldn’t be sanding on your paint. You can use a scratch compound on your clear coat but as far as I would go.

Anyone know a way to program my own settings into a chip?

How embarrassing. Guys should of deleted the video instead of uploading the argument

You skipped over the entire bleeding part which is why some of us come here. It was basically half the video of you taking the fender off. Not trying to be a dick but just kinda seems like a Waste of a tutorial video. I have the same bike exactly and having issues bleeding master cylinder and don’t see anywhere to do it.