วีดีโอ

This might be a dumb question, but the wire that goes into the fuse on the passenger side, when you spliced it, did you do both the black and red wire?

Normally, you don't need to remove the little clips when you install the new strut. It should just snap in when you push it. Removing the old strut requires that you at least loosen the clips. Great video.

Thank you! You just saved me the cost of labor.

What size bolts and nuts did you use

Where does the green activation input where plug in

Thank you

My Xplorer was idling a bit too high. Lowered it and it's like butta!

My battery and terminal was stolen so u know which goes where

I checked the hoses and both are hot but the heat isn't going into the cab. AC works fine and blower is working. Do you have any other ideas on troubleshooting?

390 hp +30 =420 hp

25 to 30 hp gains so it says

about how many hours labor time does it take to swap out the 2 motor mounts? i have stock 2wd base model

You can use atf apparently as well

WHAT YEAR?!

That’s your secondary. How do you get that off?

Thank you, I was just about to change the spark plugs the other day 😊

Hey thank you so much U really help me a lot Muchas gracias amigo me ayudaste mucho 🫡🫡🫡👏👏👏

what program tuning do you used?

I have the same tires with digital 34 psi

So do you need to change the filter

Did u have to grind out the coil bucket where strut sits so those arms clear i just bought those uca and it says on instructions to grind coil bucket edge

where can i find the position sensor adapter

where can i get the wire adapter ive been looking for one and cant seem to find one, if u could leave me a link that would be great thank you.

Rims too small need 20s

Do you think I’d be able to fit 285/70/18 on my stock 2011 pro-4x stock wheels too

Do you the plug n play version of this led brand same

Can I just do away with it and connect hoses together

how were you able to fit your intake pipe to the throttlebody? The radiator is in the way.

Is there a catch can or PVC kit to vent to the air vs back into the intake? Looking at used Armada and was shocked how cheap they are and I'm guessing no one wants to deal with DI carbon issue.

That’s nice!!!

Does this help with getting more speed or torque mine is so slow I get gapped by a a 1999 4 runner 😭

CEL stay off?

When I have both caps off anf pour coolant into radiator, it flows into the reservoir leaving the radiator empty.

Good job 👍

is it a 5/8 metric spark plug socket?

Very nice. Ive been trying to find a pd90 intake manifold since i got my titan with no luck. I want try predrags adapter or this. I see you have both. How much better is this then the predrag adapter kit? Is it way better gains? Or similar? Cus if similar im just going to buy the kit

Know this is 2 years old. How much mpg gain did you get? I want to do this to my armada.

Im going with stage 2 cajun headers setup, man its expensive lol

Im gonna check this in my armada, its getting cold and its a bit unbearable for my family. Hopefully this is the issue in mine, looks like a fairly easy fix

Did you not have to get new leaf springs with the lift. I have a 4wd 2007 titan and all the other lifts that are available have leaf springs

Is that a Canadian speedometer?

So, for low beams you need the dongle? All I see is high beams for my Santafe. I'll go look for the Auxito brand.

Just coming across this video as my 2011 Nissan titans rear pinion seal is starting to go out. Would you happen to know if this seal (made for front differential) can also be used on the rear differential pinion? Or are they 2 different seals?

Great work my friend. Thank you for this video.

So what relay are you taking out I have an Armada and my box is different than yours. You only said the name for the fog light relay.

I have a 2004 titan with a 2010 intake manifold. Where can I get this throttle body

What grille is that

Looks like you have the P (Passenger) spec, I think the LT (Light Truck) version of the Eliminator X Trail is a much better contender for the KO2's since the tread is a lot deeper and aggressive.

Lube technicians don't grease your ball joints, dont worry about that now i got you.

This is the only thing left to do on my front end do you think a worn cv axle would cause what they call bump steer? Thank for the video you are the man