วีดีโอ

Sweet GTP😍 I love my L67 supercharged 04 Dale Jr Monte SS. I've had many GTPs also. As a mechanic of 31 years so far i will tell you the 3800 is the greatest thing since sliced bread and dead reliable no engine made better. Pre bankrupsy GM was really the mark of excelence and i still recomend any GM especially W-bodies with the 3800 to everyone. For trucks I recomend any 5.3 LS blocked GMT800 before DOD and of course the GMT400s with the 5.7 also. Hell you can't go wrong with an old GM. Just make sure you use red dexcool or orange compatable and flush regulary the cooling system and you will never have lwr intake gasket issues

Nice thanks I might steal your method of mounting the intercooler

did it last past 1 yr in daily use ?

What motor is that? And stock internals?

Can this be done without the truck being cut open?? Awsome vid!

After port matching the manifold for the throttle body would this work for a stock setup without a tune? I ask because my throttle body is shot and getting a junkyard one where I am is the same price as a new 70mm.

What axles did you use

running a muffler

Do dose mount work for and 91 celica

Brake boosts on these does wonders

Slow.

A 2x4 would work good, they’re 1.5 thickness. So put a 2x4 on each side of the pipe and trace them

I can imagine the tremendous heat in the trunk. That intercooler better be soaked in ice to keep chill. My OEM turbo only keeps the trunk toasty enough with the turbo sitting on the opposite side of this set up. Where will I put my golf bag ?

🎉

i think you should content this engine spec.

Good job man.

Beautiful. I’m putting my gen 4 swap together right now. I do have a rbb k24 that I bought a couple years ago that I would really want to do but have no idea where to start. One day.

Very nice work!

Is that exhaust for sale? I’m about to drop a k24 in my mr2 and gonna start with all motor and could use an exhaust. Thnx!

Baller is that k series

Good stuff. Looking forward to seeing all The new content.

Is this gun should be buy or not

thanks !!

A lot work for saving 150 dollar for a bigger one from eBay . Personal i pay for a cheap one.

Actually very informative, I’m not the best fabricator and I’m trying to fabricate my own hood exit for my Honda. This video helped alot appreciate it bro!

I'm doing mine 2 to fight against the chance of knock on a boosted engine. I'm gonna be at 9.5-9.7 to 1 CR so I figure it will help, plus I'm running dual intake cams set to 180° and retarding two teeth on the can gear. If I run premium gas also, I should be fine with 14-15 PSI

I got that kit I really like it works great did my 98 Z71 bunch of John Deere panel's and bunch of flairs for people for there trucks and worked great still use this kit all the time love it works great 🙂

FYI, it’s not pie, it’s called a “pi” cut because it’s dealing with radii (pi means 3.14159…..). Thanks for the tutorial man, can’t wait to make a hood exit on a turbo b18 Del Sol!

Nice video bro! Subscribe’d keep the videos coming!! Goodjob

Nice video!!

Dude nice video! Definitely enjoy’d watching the video!! Thanks

Hey thanks man for taking the time to show me I appreciate it

Bro is this Brisbane?

Can u do the same on f23

When you do wheels try make a pocket of foil on the back and back purge it will get much better penatration.

Nice dude hope your channel grows well try make some shorts its really helped my channel grow 😊

Nice i love pie cuts 😀

They suuuuck! most of got two defective guns what a coincidence, about to throw them away. $15.00 harbor freight made in china BS finished the job, more junk. Oh yeah nice job other than the trash, wish mine sprayed like that!

Aww man this is sickk 👍🏽👍🏽

thank you so much dude this videos way better then most

Does this have a 2 stage trigger on it?

Could you have made and end stop ?

Not bad but like the other guy said use a 18 or 24 tooth bimetal blade and Never force the cut. Also clamp it tighter so it won't spin while cutting which will give a more accurate cut. Also make yourself a gauge so once you get the correct distance out set the gauge and you can quickly set the next piece to cut. I never trusted the angle gauge so use a radius gauge and make a piece of paper etc. as a quick set up for that degree of cut.

What was your gun setting and psi setting. Thanks

Ur using the wrong kind of blade bud. That is a jagged blade for aluminim/brass ect, use a "supercut band saw blade 54 1/2-inch x 1/2-inch x .25-inch, 20-24 tpi bimetal blade " From amazon, its a straight tooth blade and it cuts stainless like butter and you dont need to pull the blade down to cut it. Also if u mark 1.5inch up on the part the that pivots and clamps the pipe down u can use it to index your marker line. I cut a small slit in the side of it with a wiz wheel and filled it in with marker so its always level and u line it up with the marker line on the pipe.

Excellent work.

Looking good man.

👌👌👌👌👌👌👌👌

👌👌👌👌 great info and video!

Bro never throw your hose on the floor . Always hang it . You pick up dirt from the floor . Other than that nice job