วีดีโอ

I don’t disagree that the cost of the devices can be steep, but there is more to think about than just the material costs for a product like this. There are product and software development costs, labor costs, etc. I think an open source version would be awesome, but realistically the price would probably be comparable given that handheld single testers run over $60 each at this point, and non automated testers that can read multiple parameters are generally more than $500

​@seateeaquatics all these are are colourmeters... they just look for a colour change in the reagent. I have a testing machine half made here that dos just that, I did plan to make it open source but I've left the hobby now. Opensource wouldn't be expensive, that's the whole point. As for the the platform neptune is built from... hasn't had any critical updates in years now. They make it out that it's complicated and hard but it's not

Since making this video I’ve purchased a Hydros and so far I love everything about it. I think you are totally correct that they rushed the product to beat the Maven, which was delayed in order to make sure they do not experience the same issues as Neptune. I’m hopeful they will get it right

I’d imagine any rinsing method used would be totally fine, I just wanted to follow the instructions as exactly as possible for the demonstration :)

@@seateeaquatics do you have a video on testing/monitoring/tracking the new reagent versus Trident's?

Thank you!

I currently have 6 apex systems, and after this incident, my new system was set up with a hydros. Was just as easy to learn how to use as the apex, and so far seems to be working better. I have also experienced similar issues with apex’s where a 2 year old unit crashed after a software update, needing to be replaced with a newer model, and also have had them malfunction and cause a tank crash. So you are not alone, and I’m sorry that has happened to you. Hopefully Neptune can resolve these issues, but I’m not as hopeful as I was 6 months ago when the device came out

Thanks for the tip! Any advice on getting it out safely?

Thank you! And good luck, let us know if you have any questions

The herby and the bean animal both work great and are very quiet options, I have a newer video posted plumbing the bean animal

They were made by Planet Aquariums

I did not have to recalibrate the trident, it continued reading just the same after the fill with ABC, although I do recommend recalibrating at least once each refill just to make sure the machine continues to read accurately. I’d recommend doing so wether you are using the ABC reagents or the regular trident reagents

Unfortunately mine have not been fixed at this point, most people that I have talked all seem to have the same issues still. There is one comment on this video saying it works perfectly though, so I hope it’s still possible that units can be fixed

@@seateeaquatics Thats really too bad...I can use one.

That’s good to hear, hopefully Neptune will be able to work out the bugs for everyone

I totally understand! Although, I have found that the best way to calibrate the unit is to test your water by hand with whatever test kit you trust most, and input those values into the trident for a calibration. It’s an extra step, but I find that the trident reads a little more accurately when doing it this way as well

No, it will dissolve your plumbing/pipes if you do that

Unfortunately even at higher levels the unit does not seem to work properly, I’ve run a lot of tests, and Neptune has replaced the original units, even the replacements don’t test accurately at lower or higher levels

I’ll be trying the Maven as soon as it’s out and will post a review as well!

I got the kit on BRS. I usually put the heaters on the bottom of the return chamber and have had no issues in the past, but I will move them to prevent that from ever happening. Thanks!

I’ve had luck with pretty much everything, most acros are fine but I’d avoid the really delicate ones

Yes I do occasionally use the Hanna standards to make sure they are accurate, with any equipments it’s good to double check sometimes and make sure it’s running as expected. And I think you are right on the fact that they are using us as their test group, since posting this review they did replace one of my devices, labeling it as defective. The new one seems to read much closer to the Hanna checkers but still not quite right. Hopefully it they will continue to get better

That’s great to know! Thank you!

I had pre ordered 2 units, they shipped separately and it took a few extra days for the second one to get delivered. Neptune has since taken it back as defective

We are located in Glastonbury, CT!

@@seateeaquatics good to know. Im in Plainville. Armen.

I will check it out!

Yes I do use the original trident and those seem to work great! Any issues I’ve had with them have been a super easy fix as well! Usually neptune is pretty good

Thank you!

Thank you!

Glad I could help! I’m really hoping that over the next few weeks/months they can fix the issues with software updates. I’ll keep you updated

I had pre ordered 2 units, but they had a delay in shipping, the second unit was already on the way when I realized the first wasn’t working properly

I have checked the values with the Hanna, and I would like to try and make my own calibration solution using those values, but unfortunately you cannot enter the values of the solution into the apex app. So there isn’t much anyone can do to change the way it’s reading

@@seateeaquatics something that might be worth doing is testing the calibration solution coming from different samples using other test kits. This way you would see if the calibration solution is stable enough to be considered as such

Yes, but unfortunately it was over hyped and they under delivered

At least they will give you a refund, I have 2 right now and they want to “work out a solution” instead of taking the products back for a refund

@@seateeaquatics direct copied email from support Thank you for that information. I'm sorry to hear how frustrated you are with this experience. Looking at your results between Hannah and the Trident-NP we don't really see an issue. You mentioned that the NO3 has a delta of 2 ppm between the TNP and Hannah, however, both the Hannah HI781 and HI782 have an accuracy of +/- 2 ppm (if you're diluting for HI781) while we report +/- 1 ppm giving a total delta of +/- 3 ppm for NO3 comparison between brands. For PO4 I see you're using the Phosphorus HI736 and using the equation (Phosphorus x 3.066) / 1,000 to determine PO4 in ppm. Hannah reports HI736 of having +/- 0.025 ppm while we report the TNP of having +/- 0.01 ppm giving a total delta of +/- 0.035 ppm for PO4 comparison between brands. Based off the different numbers you provided for the PO4 HI736 vs TNP you're generally having a delta of +/- 0.04 which would be reasonable. Also, looking at your graphed Hannah tests vs TNP PO4 tests the trends match almost identically just with an offset of about 0.04 ppm. Since it's widely accepted in the hobby to focus on trends rather than test per test comparison the Trident-NP appears to be doing it's job successfully. It shows you trends going up and going down.

Totally wrong interpretation of how the ulr Hi736 works. My email in return Hanna ulr is +/- 5ppb or 5% of the reading. So a Reading of 0.06 has a margin of error of 0.003 +\- not 0.01ppm. Today’s tests 7.4 Hanna nitrate, .13ppm phosphate. I do agree nitrate is within the margins and much less of a concern. The np just completed its phosphate test and it’s 0.05. That’s a margin of greater than 50% in comparison or 0.08 ppm out. There is a serious issue here and if you don’t care to address it with only a generic answer I will need someone else To talk to. I didn’t spend 1000$ to measure trends. Understand the level of accuracy is very bad. I can see by eye in the Hanna reagent when phosphate is higher just by the blue color. I also used a salifert test and it confirmed what I’m seeing. The answer that it’s acceptable isn’t acceptable. You’re going to have many people disappointed with this product that was advertised as accurate. With the train of thought today the test went up from 0.06 to .13 on the Hanna but only 0.01 on the trident …. I’m sorry but that’s not good enough at all

The math they list out in their explanation is technically correct, but it seems more a way to deflect the problem back on to you, because the actual numbers are still far enough off that their “delta of 0.04” is not correct. If you calculate .13ppm, the trident should read no less than .09… it’s not fair to everyone who has spent their hard earned money on these for them to do keep deflecting instead of helping. They should issue a recall, but I doubt they would ever do that. Hope they can fix something through software updates…

@@seateeaquatics It was either a refund or a chargeback. A chargeback hurts them worse.

Thank you! Will definitely check it out! I’ve supported BRS and Neptune for years and this whole experience has been bad. Since posting the video I tried leaving a review of the device on BRS, and have been censored. Neptune said they could try to resolve the issue remotely by logging onto my apex and doing some updates, but from the sounds of it, other people have let them do this and the issues still persist. I’ve gotten negative readings on the device which I think further proves it DOES NOT WORK. In speaking with the hydros engineers at ReefAPalooza this year I learned of how thorough they are when designing the products and how everything is built on redundancy, I will definitely be trying their products on my next build as I have a lot more faith with them than Neptune at this point.

@@seateeaquaticswere you at RAP NY? If so, there’s a good chance we passed one another. Yes, BRS is accepting returns on these units but you have to fight with them to get them to do so. I have someone in my community on my Discord who finally got BRS to accept it as a return so I’m encouraging him to share screenshots of that convo on R2R in hopes it helps anyone else in the same situation . $700 on a device that does not work is quite expensive and to some, that’s a house payment. I also think it’s one of those things people can become discouraged over and end up leaving this hobby all together - depending on the person! At this point, it seems like Appeture cares more about making money versus offering a product that is solid and to better help reefers like you and I.

Thank you! It’s sad that they have this bad customer service where everyone is experiencing the same complaints and unfortunately from my experience their reps have no problem lying right to a persons face in order to make something seem ok, so I’m not surprised by that response. You’d think a company as big as them would try and fix something like this instead of trying to continue pushing the junk. But regardless, like you mentioned I definitely will be switching to Hydros. I’ve been doing a ton of research as I haven’t used their controllers, and from what I’ve seen, it’s hard to find complaints, and the devices seem rock solid. Plus from talking to their engineers at reef a palooza, they do thorough testing before releasing a product, so that they can avoid the problems Neptune has. They specifically look at the complaints Neptune has on their controllers to avoid incorporating the same issues into their devices. So it seems very very promising!

Great! It was added to the main display tank the same day the video was posted, he’s eating like a champ and thriving!

The filter socks on this tank are in a slide out tray, so I haven’t had any issues changing them, if I ever need to move the Refugium I can just remove the stand pipe as it isn’t glued in, and let it completely drain into the sump :)