วีดีโอ

good day sir does your compressor have a humming sound if the power is turned on.. if its does then maybe the compressor is stuck up..

check first the capacitance if its below 20 percent of the rated value then replace it sir..

@@electronicsandbiomeds7391 changed the capacitor, compressor still not working, thn gave direct supply to compressor still it did not worked

@@electronicsandbiomeds7391 do uh have any contact from which I can buy new one

brother my first suggestion is clean up first the blower fan.. try to rise your laptop by an inch from the table.. make sure that there is no obstruction from the blower intake of the cpu.. try turning it on.. in some cases that should solve the problem.. make sure that theres an airflow at the bottom of your laptop

good day.. sir nibp boards are durable and cannot be easily damages. if its the setting.. maybe you need to reset to factory setting on your patient monitor

@@electronicsandbiomeds7391 how to setting the factory?

check first those 2 solenoid valve.. make sure they are not leaking when you take the bp..

Replace nibp board

@@electronicsandbiomeds7391 how to know whether they are leaking

@@JAZIRCH hello sir good day you can identify the defective solenoid if there are no ticking sound when you turn on the nibp.. sometime those solenoid can accumulate dust due to daily use.. and can cause intermittent bp output. try also to check the flexible hoses in the bp area.. do not try to manipulate or adjust the trimmer from the bp board focus first on the leaking.. if you have the same model of patient monitor try to swap the board also the test..

@@electronicsandbiomeds7391 I replaced nibp board it has airpumb solenoid valve full set.

good day is it the same in the video.. if it is then just pull out the regulator and have it check. if their a hose connected to it then pull out the hose thats attached to the regulator and just cover up hole of the hose.. and try to start. hope it does help

yes.. but first check the cuff and the tubing going to the monitor for a leak.. check also the solenoid valve inside the monitor..