วีดีโอ

@jaxolotle I might consider it. I never completed echo so it could be a project when I have a bit more time for videos.

@juansaidg discord.com/invite/r7uSYsvB This discord server is a great resource You can't play natively on quest 2, you will need a pc to run visual pinball in vr.

@curry_man2567 I haven't been able to film them the past couple years. Hopefully I'll be back on the horse next year

Ok np

This game definitely has a special quality to it.

This is true, but the way it's set up, if buttons are not active for a machine, they can not be configured to anything, for instance, on TMNT where there is no dedicated start button, you cannot set the start button on your controller to ANYTHING, even MAME UI stuff, as of now, you have to kind of work within the already active buttons

@@SuperballsSupervidsOnYTAhhh. Dam. That sounds like a pain. I’ve yet to try this out I don’t have a VR headset. I wanna tho!

@@Lowie81 I thought so at first but the dev's configuration is pretty tight, and makes sense if you have a standard 8 button layout plus start/select buttons, you can just look down at the control panel of the arcade machine and figure out what buttons are what. You WILL need a VR headset, there is no flatscreen mode, nor is it planned to have one,

@@SuperballsSupervidsOnYT yeah I heared that sucks I like free roaming on NRA and was hoping to do the same on here.

To move around the arcade and start a machine, you have to use the motion controllers. If you have an XINPUT controller, each machine will have buttons already configured. Select will insert coin, start will MOST of the time start the game (on TMNT for instance there is no dedicated start button on the cabinet so button 1 is also start). The button config "SHOULD" make sense, but keep in mind that if a button is not active on the machine, you will NOT be able to configure it for anything, even MAME UI stuff. This is something I've already discussed with the developer in discord.

I'll compare the settings in your video to mine amd see if I have anything different. You have better hardware than me (ryzen 9 6900hx and a laptop 3080, 32gb ddr5), so unless you have some crazy ram timing issue or incompatibility with your motherboard, I can't see it being hardware. I'll be able to take a.deeper look into it tomorrow.

@@SuperballsSupervidsOnYT thank you

@@wncoulte Sorry it took me a bit to get back to you, had some calls for work I couldn't turn down. I seem to be having some trouble running the game in the latest version, I'm locking up at the loading screen and getting the following in the main window's log: E SYS: '_sys_lwmutex_lock' failed with 0x80010005 : CELL_ESRCH [2] E SYS: '_sys_lwmutex_lock' failed with 0x80010005 : CELL_ESRCH [3] U cellAudio TODO: cellAudioPortOpen(): CELL_AUDIO_PORTATTR_OUT_SECONDARY E SYS: 'cellNetCtlGetInfo' failed with 0x80130108 : CELL_NET_CTL_ERROR_NOT_CONNECTED [1] U sys_net TODO: sys_net_infoctl(cmd=53, arg=*0xd00402b8) E RSX: Cannot invalidate a currently bound render target! x11 F {PPU[0x1000000] Thread (main_thread) [0x006a9a20]} VM: Access violation reading location 0xb3f811cb (unmapped memory) Are you getting any similar messages?

There is a setting slider to change the internal rendering resolution. I set mine to 4x. In order for this to work another option under the same tab "strict rendering" or something like that (it's one of the checkboxes on the right), which enforces the native resolution.

Yeah, sorry I missed this year, we have some family health emergencies and my daughter was sick that day. Hoping I can get a better camera and maybe a drone to film with this year so I can stitch up the footage.

@user-xf6qr8lf5p we can always go to rumble. They don't just delete stuff because it offends someone.

At times throughout the display, yes. During the finale almost the whole time. That last little bit with the titanium salutes... it's like rapid fire in the chest.

@@SuperballsSupervidsOnYT sounds bad

Unfortunately my daughter was sick and my father in law had just been diagnosed with cancer. I just didn't have it in me to go. I am going to be saving up for a pretty expensive camera for next year though that shoots 4k hdr with good night performance, and I will be trying to capture a proper surround mix with some new microphones and recorders I have. Big plans. Even if it's disappointing that my 13 year streak had to end.

Did you try starting over again? The first playthrough of a game will have stutters and drops as the shades are compiled but there is a setting where you can save the precompiled shades to your hard drive and that will reduce the stutters. This is really pronounced in a game like Smash Ultimate which has a ton of unique flashy effects. Over time the game will smooth out as more and more shades are reused. Try that. If not then check out the Yuzu discord channel. Just note that if you downloaded the game from a site, do not mention it. They do not support piracy and the second they even suspect you downloaded the file they will blame that and stop helping. Also, check out my video in Ryujinx. At the time I made this yuzu didn't support 4k but because my desktop is run in 4k the video capture is in 4k, which gives video on TH-cam a better quality and reduces compression artifacts. Ryujinx at the time did support upscaling and was actually being rendered at 4k.

@@SuperballsSupervidsOnYT Thank you for this detailed answer ! I should have mentioned I already knew about the shader cache, but I'm still thankful you mentioned it 🙏 I will try to run the game another time, to see if this is about it, I wondered if it was the case to be honest... the rest of the game runs smoothly ! I joined the server and tried to seek for help, but no one answered except for someone's mod. I'll try to get it ! Still, in the meantime I tried to uncap the fps, and it seems like it partly works, so we'll see in the future. Still, once again, thank you, you're being really cool with your community, and I respect this so much !

@mathieucaron6529 I hope it helps. I try and respond to everyone and it helps being a small channel. I know the discord can be hit or miss, the internet sadly isn't what it used to be.

@@SuperballsSupervidsOnYT Still a cool move :) some people don't bother Well yes, I just left them, I think it's a miss unfortunately. Too bad, it could be a great community !

Of course the commentary will be not as good as the game that came after it.

That's great, man, I'm glad you enjoyed it.

It is a world class coaster. Cedar Fair buying Canada's wonderland was awesome for the park.

I totally recommend (and have a video of) Leviathan. It's a different experience, more like soaring through the air and speed near the ground. Behemoth is an airtime beast with a more traditional wooden coaster out and back layout.

@@SuperballsSupervidsOnYT thank you! ive been thinking of riding leviathan, behemoth and striker (maybe slingshot idk)

Thanks.

Not gonna bother. Haven't had this bike in like 6 years.

@@SuperballsSupervidsOnYT Fair enough, lol. What're you riding these days?

@Drunken_Hamster I had a 99 vfr 800 after the magna. That was stolen last summer. I'm dealing with some family health issues right now so will be a couple years before I'm back inntbe saddle. Not sure what I'll get next time.

@@SuperballsSupervidsOnYT If you're comfortable with the power of the 800 and Magna, I'd recommend a CP3-equipped bike from Yamaha(MT09, XSR900, or Tracer 9 depending on your tastes/usage). If you want to go faster, MT-10. I assume you don't want to be hunched over on a supersport. The big trick with modern bikes is getting them tuned by Chris Moore. Not even to necessarily make more power, but to just remove the factory ECU gimping, restrictions, and dead spots in the powerband. That and a cat delete slip-on are key.

@Drunken_Hamster thanks man, I'll keep that in mind.

What?

Unfortunately this year I could not. My father in law was recently diagnosed with cancer and has been in and out of the hospital. This is an important tradition for me, so I will be out next year in force, hopefully with a better camera. I have new audio recording equipment and will hopefully be getting at the very least a quadraphonic audio capture on four condenser mics, that I will end up mixing up to 5.1.

Hello There

That's amazing man.

For my Leopard I used a Display port to mini display port adapter. I had no issues except that my version of display port was one version lower than HP's requirements, so if I ran games at too high a resolution I could overload the data throughput and crash steam vr. It was just a matter of finding the right settings. I've been using my nephew's quest 2 lately

The Dolphin Emulator can be downloaded directly from the Google Play store. The game image can be downloaded from Vimm's Lair.

She did good. Won't be long before she is better than me at take and hold.

This is the way.

@@SuperballsSupervidsOnYT lol, nice vid tho i love that game

It's in the settings you can toggle it on and off.

There is an issue in the app where trigger pulls sometimes register twice. You can see that sometimes (not all the time) after it happens, I will target something and then my aim will jerk away from the target toward another, even though I didn't take a shot. Occasionally it won't shoot on the next trigger pull. The developer is aware and is looking into it, it may only affect wmr headsets, not sure. The game is early access, and despite the annoyance, I've learned to work around it mostly, and have improved to a point where I've managed a top 30 time in the first two courses.

Hey, I just wanted to follow up on this. I tested this using my nephew's Quest 2 and the double pull issue goes away, it seems that it's an issue that only affects the HP Reverb G2, or maybe all Windows Mixed Reality headsets, can't be sure as I only have a Reverb. The devs said they are looking into it.

@@SuperballsSupervidsOnYT huh, interesting.

Yeah. Luckily enough my nephew has left his quest longer than planned so I've had a lot of time to play. Absolute best way to play this is with a setup that uses base stations, infinite inside out tracking in general to be a pain with up/down aiming like with the pop up clays, even on the quest, but it is more than doable you just have to be mindful of how.you are holding your hands.

Nobody is really stuck with Madden though, except NFL simps who prioritize official league branding over good football.

Thanks

If you need something more comprehensive i'll dig into my settings or maybe even create a video on setting it up so I can share them. I have made a few changes though, I think for this one, I had the frame limiter set to "unlimited" and had vsync off. At times I was getting 90+ FPS. Just keep in mind, when the play stops, the engine was typically locked back to 30fps and the graphics were enhanced for the closeups, so anything over that should be appreciated, the game during play should run at 60 fps. But the cutscenes at 60 are super nice. Nice to know there are others out there playing this wonderful game. Also, check out my most recent game against the Islanders, it was an awesome game.

@@SuperballsSupervidsOnYT , it’s running a bit better but not as well as yours. Would you mind telling me what settings you have for cpu,gpu and if you did anything under advanced. Thanks in advance. I checked out your islanders videos as well great game, nothing beats OT and shootouts.

@@shaggyultra69 I'll check it when I get home from work. Keep in mind I'm running a ryzen 9 6900hx and a mobile rtx 3080 as well.

@@SuperballsSupervidsOnYT okay, thank you

Ok, sorry it took me so long to get back to you, here are my settings: Keep in mind that I use custom setting set per game, and try and avoid universal settings. Under CPU Tab: PPU: Recomplier SPU: REcompiler SPU XFloat: Relaxed Enable SPU loop detection checked SPU Block Size: Mega Preferred SPU Threads: 2 Thread Scheduler: Operating System Under GPU Tab: Renderer: Vulkan Framelimit: Infinite Anti-Aliasing: Disabled ZCULL Accuracy: Relaxed Shader Quality: Low Shader Mode: Async Number of Shader Compiler Threads: 2 Write Color Buffers Checked VSync Checked Multithreaded RSX Checked Async Texture Streaming Checked

Yeah they were a legendary commentary team in real life but they just never did well in the recording booth for games Even when they brought them back for NHL 2k6 through 2k8 they weren't great

Try messing with the setting called "polygon sort accuracy" Mine is CURRENTLY set to per-strip, which I think is the most accurate, but cycle through those settings and it will normally help with graphical glitches.

@@SuperballsSupervidsOnYT I tried them all. Nothing works. I see other people playing flawlessly on redream so I don't why mine has issues. I'll play on GameCube emulator for now cause it plays perfectly on that. But the Dreamcast version is the original that's what I want

The same way millions of people every year don't go deaf.

@@SuperballsSupervidsOnYT well I’m just saying everyone is too close including yourself you don’t own protection

@@Beautylifestyle222 nobody is too close.

@@SuperballsSupervidsOnYT well it kinda looks like it that’s all the booms are huge !

Yeah I have no idea how they eliminate the telltale clack of the anti-rollback dogs.

It was originally named Wilde Beast, changed to Wild Beast in 1997 and then changed back to Wilde Beast in 2019.

That's rough, being chased by those things gets my heart pumping uncomfortably fast. Nintendo really nailed the tension with those segments.

Not exactly.

If you sit in the back, that moment is when the first car crests the hill and starts pulling you toward the top faster and faster.

@@SuperballsSupervidsOnYT Oof, just went there today and it was fun

No doubt, I'm hoping to go in October when the lines won't be crazy. I have a 4 uear old daughter who is finally tall enough to go on just about everything but the tallest requirements.

@@SuperballsSupervidsOnYT nice

Yeah, she does roller coasters in vr so hopefully she will get on a real one.

Weird, I didn't even notice that. Typically doesn't capture the cursor.

Awesome. Have fun, hope it isn't too busy