วีดีโอ

I usually using the more common Mazzilli version ZVS.

If you watched my videos... you will understand that doing so is redundant and more boring. Experimenters easily understand what it is and knew it. Also, tons of schematics were posted in google. Kacher or what the correct spelling is, is the same as Slayer Exciter. The setup and ideas were uploaded many times. My last series of videos are also using the same concept, just trying to improve the performance and have some minor twist.

... and I believe you only watch the intro not the whole video.

@@reyantonio578 Hindi kailangan ang mga iksaktong component at circuit diagram sa ganitong proyekto. Kasi hindi ito gumagamit ng matinong mga pyesa na nabibili sa palengke at wala itong arithmetic na kasali. Na pwede kayong maligaw nang landas. Ang mahalaga ay ang konsepto na maintindihan. Nang sa ganun kahit kayo kung kaya nyong magbasa ng mga pyesa at alam ang mga trabaho nila ay kaya nyo ring makagawa ng kaparehong epekto. Ang proyektong ito ay batay parin sa mga lumang proyekto na mapanood uploaded sa mga taong nakalipas. Simpling inverter at basic solid state tesla coil gaya ng slayer exciter ay pwede na.

@@JB-20 thank you for your reply

May napag-umpisahan kana po ba?

Sory brother, during those time I never had a HV probe. But based on some of my experiments and analysis it's a series of sharp pulse with high freq sine ringing that gradually dampen.

Thanks bro!

@@Daniel-r3u4m Yup, but it works without ground. However, more effective having Earth ground connection. The more important thing is idea. Also, not all the time you need an Earth ground and be dependent on it. We need to think more than that. What if you want a device that is compact and portable?

Yeah.

I'm just trying to get the effects of stepdown tranformer from teslacoil.

Agreed. I made my own configuration based on my self understanding on this matter. In short, I do my own system. So, this is not totally a problem. I don't rely on what others do, it will only help experimenter more confused. Earth ground really more important but I'm doing together in my experiments for studying a system that is more compact which doesn't need physical Earth ground cable. Time comes my system can run nicely without Earth.

@@JB-20 yes, it is best to go on your own ideas and tests because many movies on youtube is only for views I'll try your idea with inverter and Tesla coil and use the air and earth to see what they get anyway super What You do tests help you understand the mistakes and get the results👍

I don't have involved in any forum but the schematic is already there.

@@JB-20 do u talk about topruslan schematic?

It didn't work as what is expected on the schematic. Yes it run but only to light up bulb or any DC load. Not self running device.

Can use flyback but in different way like cap dump. But at higher resistance/impedance inverter output transformer.

Yes, that's the reason I study myself for a long time how to configure this to make the output 50 to 60Hz. Although we can still make it at higher freq by converting to DC then to full-bridge like conventional pure sine wave inverter. This is just another way and thinking if possible. I can directly use with a 50-60Hz transformer but it seems they are consuming more than this since this one is chopped a hundred times per 50% than a continues 50% duty.

@@JB-20 Fantastic! I am going to have to see how much that iron core transformer eats in my system. Thank you for the heads up. I might have to build what you have built. I will be in touch my friend. I may have to ask some in depth questions. thanks again.

Its not final yet but I put the basics in some of my previous video.

Yup! You're correct.

Yes bro. Conversion nalang para makinabangan. Collect pa ako para sa next move.

Sorry.

I do not use Marx nor Cockcroft in any of my system. That, will allow the slower speed of electricity to flow. The more stages with cap(s) charging/discharging especially with those metioned above which have lots of series caps are a no-no to me. Step-up transformer is I believe much better and faster. My reasons to use HV is to permit the use of SG which is the main element for recuperation or in any system with feedback or looping circuitry and also to communicate between the air and earth(I do not follow what exactly Don's system is). It was only before that I wanted to try those two mentioned systems but after my several experiments, I learned that fast charging is also important but, not restricted on that. There are some possible ways that need to experiments. Zilano's simplified version(the reversed tesla as what late fellow researcher said) is good. But you cannot achieve good result if your high voltage source is too weak. It sometimes a reason why you should need another step up stages. But in that case you're sacrificing the speed of the process. The more charging and discharging the slower it will be. In order to eliminate this, you concentrate on the first stage to have voltage that is enough for cap dumping with a SG(depends either purely solid state or not). So just in the very beginning of the circuit, obviously showing the possible outcome if the efficiency will be good or not. However, there are possibilities that can be refine and retune at the following stages. Frequency figure mentioned in Don's is not so important since SG will dictates the final frequency going to the output. It is only needed to be high enough to have greater discharge on primary(I may be wrong). *Freq on the input side then to the output side is sometimes important to maintain the transfer of energy, a give and take, transfer of water bucket to bucket ...to make it balanced and in harmony avoiding shortage of energy at the output. But, sometimes not necessary. Don's, like other's, some parts are just there to confused viewers. [This experiment is a bit older. I am still refining this.]

Sorry about that mate. I've turned it down when I started talking.

@@JB-20 haha I’m just messing around

Ok

Yes, might be. But they may trying different things with almost similar concept secretly. Or maybe another concept but similar outcome. I don't know, just my thought.

I'm preparing...

No, just 5kV/30mA model. There are other model that are higher kV.

No other than Nikola Tesla, and I'll stick to what the basic principle.

It's all about the electric generator. I tested most of the stages/section by section. Some may gave me good if not perfect results and some may not(reasons could be due to the inappropriate components). But at least I tried and learn by myself thru correct and error moves. I might not arrived the final solution but atleast I have those several ideas that need to try. Once I made a complete prototype, probably that's the right time to say.

@@JB-20 TThere is a scientific applicant like ROSEMARY AINSLEY. She also has very good results and solutions. In particular, she works with Tesla bifilar coils. I repeated her experiments and received super-single devices. Thank you for your efforts.

@@Маркони56 Thanks for the info, I believe I heard about her somewhere in the PJKbook pages and might be here in YT. Seen some of her works but maybe not really gave good attention to me that time that I maybe need to come back and see. For the moment, I need to focus in what I've started, although I have a few different devices and concept around. I also need to revisit some of my past experiments and maybe it can be integrate with my new stuff.

@@JB-20 OSEMARY uses a second OED, which returns it back to the power supply. And this can be obtained thanks to Tesla's bifilar coils. Please note that in addition to the reactive currents that light the lamps from the bifilar coils, there is also a huge electro-static field around the installation. This field can similarly be collected on a capacitive antenna and sent to a power source. This reduces the current consumption, in particular if powered by a battery (rechargeable batteries). For example, this is what Donald Smith does, he said at the conference that he has a generating system and a collecting system. It converts the electrical component into an electrostatic field and energy. returns the fields to the battery. Bifilar coils based on the Rosemary principle fit perfectly. In fact, it is the same as the Tesla transformer, only the winding is wound in two wires and the second bifilar circuit is wound along the top, also in two wires. The energy is very huge coming out.

This is what I did in the past experiments that I need to recreate. I may achieved OU but may also not. I temporarily stop after one of my batteries died during the test and kept them until typhoon destroy them.

Who's boy you are referring to brother? The Chinese one?

Yeah sure I'm preparing for the video. But this setup is in development.

That's what I'm trying... Just a mini size, though.

@@JB-20 agreed, that's the key to gain from the ambient

@@elgroovy That's based on my experiments.

Honestly, I'm no expert about all of these. I don't have any idea what's the best way of measuring current in this kind of setup. I ask different individuals and from any groups but I failed getting the best and correct answer. But I believe this is the best way I can using this what you called shunt resistor. When we talk about high frequency, especially this one wire technology is only seems open circuit physically...but not in reality. There is an unseen virtual capacitor there. Sometimes they called parasitic capacitor... actually an LCR across the open terminals. So speaking of electricity, they are still connected thru those parasitic elements(LCR). And by using this shunt resistor isn't actually giving huge error, but giving as close as possible and is the best way(I will accept, I could be wrong). My only guess that could be wrong is the resistor value used. Please share if you have idea that favor to the precise measurements regarding this setup. Thanks for the input. Note: the PSU reading was almost closed to the results using the shunt resistor. Digital display on my PSU wasn't accurate due to the speed of extraction of current so this shunt method could be ok.

@@JB-20 You can use analog ampermeter it will show avarage value. Regrding of readings of PS, on your video the reading of power supply displays shows 0A.

Will post sooner. It's not finished yet. It's under development. But will post a short video.

@@JB-20 спасибо

A lot in my area, 😅.

Thanks mate.

Salamat tol. Lilipas narin yan...parang ads lng.

Hindi pa rin po, pangit yung nagdala dito, bagal ang trabaho ng rip-rap. Naging pending kasi delikado sa tubig kapag lumakas ulan, umapaw ang tubig mula sa ilog na nasa tapat ko lng. Parang basura pa ang sitwasyun ko dito diko ma arrange mga gamit.

Thanks for continued support.

un oh.actibo nnmn c idol hahaha

Minsan ganyan para malaman na hindi pa tuloyang bagsak ang karera.

Buhay pa tol. Nag ipon lng lakas.

haba ng pahinga mo idol..

@@dapakers Nag-iipon para sa ginawang projects.

anu ung bagong gadget mo idol n laser etching.. gawan mo din sana mg video.prng unboxing

Sana makita kopa yung video na ginawa ko, wala nga lang salita doon.

Yeah, right!

use another circuit to pulse it with capacitor discharge. Like high voltage primary of nikola tesla.use here as pulser for secondary.remember primary circuit of nikola tesla capacitor discharger whn dischgr create powerfull magneticfield that can couple to the primary of this transformer and captured by caoacitor.

Before some sort of shortingbthe secondary. Why not add magnets in the surrounding area of tranformer. To strenghten magnetic field collapsing tht is captured by caps

@@dapakers Can be added with magnets but not suitable if you want higher frequency.

​@@JB-20if i can remember floydsweet run his device 50 to 60 hertz only. No high frequency. With Bar of magnets and bunch of coils.i think 50 to 60.maybe tesla HF style is irrelivant for this to work.on this setup

There are another videos showing MOT consumption with loads. This coil don't give benefit to the system. There will be another configuration that will hopefully be upload soon.

Yes, you're right! Understanding the system is really more important. No, during the experiments, I didn't find ways to get good ground in my position, and I used my bench PSU, which was just repaired at that time, which spoiled my Tesla coil. My observation is to better use batteries for these types of experiments. This is to avoid bad electrical loops that damage equipment. Yes, I have had some experience with how having good ground improves performance. When I was on the rocky hill, I used trees as a good path to the ground, using #4 nails.

I made an oscillator to drive the first coil thru MOSFET 1( the low freq squarewave) then half of its cycle taken (from the same oscillator) and chop many times and sent to the MOSFET2. In other words one osc for the two MOSFETs. One used the full cycle, and the other one for only half the cycle but the time had been chopped to make more shorter squarewave pulses.

I made another controller that is easier. 1 with scheme: th-cam.com/video/itmTX4iMfkg/w-d-xo.htmlsi=6x5va7YqILEo15yx 2 with scopeshots: th-cam.com/video/jkeccI4qZm4/w-d-xo.htmlsi=JUZ8cjF_O91We8o1

I only tried to learn this stuff and found out this configuration doesn't work. This version is coming from someone not from the original T.K. It is hard to replicate from the original design since there were no any means of something to copy. All you've seen in the internet are all proposed scheme from different individual. Still, I am working on different configuration but based on my own understanding. The ideas are mainly from N.T.

@@JB-20 I just got hold of Kapanadze's original schematic drawn by him with his pen on a notebook ...

@@TitiProsopel Wow, how lucky you are! The coil may give some benefits but I believe there's something more important.

Nag iisa akong gumawa brad sa sarili kong experimento, kaya minsan makagawa ng series minsan naman mawala. Sanhi yan ng kawalan ng pundo. Mag- iipon. Buti sa inyo maraming donation. Any time pwede makagawa.

Yung mga ginagawa ko exposed napo'yan mahigit sangdaang taun na. Kaya walang dapat nakawin. Gumagawa ako ng mga preparation para makagawa ng ibang series of videos. Kailangan ko rin kumain kaya kailangan ng sariling pera at yung ibang para sa projects.

Sa mga seryuso at totoong experimenters namimigay ako sa kanila. Kaya paano maging takot nakawin? Kathang isip lng po yan sa mga ibang desperado na mga spoon feed.

Pero totoong nanakawin rin. Kita mo naman sa mga online selling. Iba nyan kinuha lng sa nakita sa YT at benebenta ginawang produkto at pinagkitaan.

th-cam.com/video/aqy5fORozHM/w-d-xo.html aralin mo yan brad. Di po 'yan sekreto.