วีดีโอ

For your first video you did excellent. I can't wait to try this on my '02 suburban. I've been wanting to give this a try and now I know how.

This work on my 2000 chevy silverado 1500 but can't dip low to high beam when head lamps off. ( during the day)

For 99-02 trucks & suvs, there is a yellow wire in the headlight lamp harness on each side. Ground it, and the lows will stay on with the highs. The fogs you will have to jumper. The 03-06 (plus 07 silverado “classic”) trucks can use the drop-in jumper board from Fleece Performance. It’s a great solution and worth the $25ish it costs. It allows you to have the 6-pack of lights all on together. Just pull 3 relays up and drop the board underneath them and reinstall.

I have a 95 S10 2.2l with a 5 speed T5 transmission and it's a LS model - pins 5 and 6 are what works for me just like another guy on here. But how do you reset and clear the codes? take leads off of the battery and leave the door open and light switches on to get rid of any power at all to the truck for half a day and it resets?

You're doing great man

I’m not sure but I think you want pin 87-going to your head lights. Unless u using same li e 85 to jump star a relay. 85-supposed to be regular 12volts acc. 87 supposed to le higher current flow. But if it works it works.

What type of cable did you use to bypass???

Which fuse is running light

hello! i know this video is old and i’m very late but how has this held up for you over the years? has it given you any electrical issues at all?

is it necessary to ground both sides for the high beams and the low beams to run at the same time or can i just do 1 side

You didnt say if you put the relay back in on the fog lights or drl’s?

I have a 5 pin connector i can't figure it out just burnt my finger when the paper clip got hot on my last try so i quit 😢

Good job so you had to add the ground in order to have both headlights? Like the low beam ground?

Wouldn’t it burn out the headlights faster if I do this?

Will definitely try this out on my 01 Tahoe

Cut your fog lights for oncoming cars

What do you have your fog lights wired to. My truck did not come with fog lights but i'm adding them. Are tgey tued in with your headlights

Cool mod! Will be trying.

Oh my goodness thank you so much! My fogs wouldn't stay on unless my high beams were on. I tried the jumper, and it works high/low beam. 01 suburban.

Being able to wire daytimes in w turnsignal would be sweet

Keep up the good work

You splice the body ground into the oem negative run? Or you cut it and run the negative from the bulb jacket to the body ?

Bro your the best..

great video. you should be using diodes so that power can only flow in only one direction.

Great Video thank you

It’s really good you helped me a lot Ty

Doesn't work. Did this and they will come on for about 30 seconds then shut the headlights off.

This video is very helpful 👌

I have a 09 Sierra has new heads new oil pump so great oil pressure....but is still ticking someone help 😓

What pump did you use? I also have afm 5.3 just hit 260000 and my o ring is shot. Wanna replace punp but confused on which ones for afm

I put leds on low beams and it worked only a day and they are not working . I put the original bulbs and still doesn’t work . I can’t figure out the problem

I replaced my switch, screen, oil pump, o ring, and cleaned my oil lift tube. Still around 40 and have a lot of tick. Any brilliant ideas?

Good job!

The relays work by grounding. See videos by South Main Auto Repair.

My drls didn’t come on and I wired it to my 10 amp fuse and they came on. I also wired to my fog lights & they worked. I tried turning them off but they stayed on. Should I add a toggle switch to power it on & off?

My guy a hero

i JUST DID MY 2000 Tahoe LT 85-87 with a 20amp fuse between

Great job on the video. I have a 1995 Chevrolet S-10 LS that I bought new. It now has 344,000 miles on it. It also has the OBD II plug. Pin 4 and 6 did not work on mine but Pin 5 and 6 did the trick. Mine is the 2.2l, that may be the dfference between 4.3l i don't know. Just wanted to put that out there so it may help someone else. Great video on sharing good information on these bastard years.

I have the same problem with a 2004 4.8 replaced o ring oil pump oil pressure sensor did fined filter under sensor or maybe I did not look good enough I'm at 20 on pressure goes down to zero when oil gets hot no nock on motor only low oil pressure flashing

Update video tomorrow. Problem solved days ago lol.

These newer Chevys are a headache.

My 95 Blazer also has an intermittent starting issue were every 2 to 3 weeks it will fire up then die then it just cranks but will not start. Whenever that happens I have to spray brake cleaner down the throttle opening then it starts and runs just fine on its own for 2 to 3 weeks then it happens all over again. I took it in and the mechanic told me it's an electrical problem having to do with the signal from the pcm to the fuel injector. The service engine soon light will occasionally come on when I drive it sometimes it will flash and sometimes it won't then it will go out after a couple of minuets. It also shifts too early at wide open throttle where it shifts at 3,000 to 3,500 rpms when it should be shifting between 5,000 and 6,000 rpms. It also idles high after sitting overnight, depending on the temperature outside it idles between 1,500 and 2,000 rpms and when its warmed up you have to shut off the engine, let it sit for a couple of minuets and then start it up again and the idle will go back to normal. Someone please help me I'm stumped!!!

My '95 Blazer(manufactured in April '95) has the pcm under the hood, has the same obd2 plug, it has a pin in 2,4,5,9,13,16. No pin in 6. So what do I do for mine?

Very informative and thorough. Thank you.

I have a 2002 Chevy Burban and when I grounded my passenger side low to the frame, I lost the low for the passenger side but the truck worked for my driver side Hi/Low stay on together. Which is so weird, What do I need to do to fix this issue ? Bottom line, Passenger low doesn't work but high works, driver side both hi and low work.

Has anyone got a clue to run DRLs with fogs ? I had it once before but forgot what wire i jump to where

Thank you . I did pin 85 from the headlight to pin 87 on the fogs . Works ☺️. 2001 Tahoe

Thank you for video, what Guage wire did you use 16,18, and do you think it will work on 07 chevytrailblazer?

Very helpful! I'm tired of not knowing what the heck is going on with these lights not coming on even after replacing all bulbs and housing.

09 Silverado 5.3 here. I’ve replaced the O ring, sensor switch twice (thought one may be faulty) and changed the oil filter. Still showing low pressure. Should I just replace the oil pump now?