วีดีโอ

Cannot stress enough use wax on all tight fitting or small parts. Huge difference will not break pieces and helps avoiding you from forcing pieces in. Trust me broke a few on my 1st model

stupid stupid wire shelf Just put in 3 hours figuring this out. STUPID heat wrap. 1) Assemble the three shelves first including the paper. 2) Bend the wires for the sides/posts and mark where each shelf will be with a sharpie. 3) slip the first four stupid heat wraps on the posts with the first shelf above where the mark is for the top shelf. 4) dab the awesome glue above the marks on the post and below the top shelf. 5) slide the shelf into place 6) let dry for a bit 7) repeat for the other two shelves. 8) let dry until tacky and adjust shelves so they are level and even TADA!!!

Fantastic model sir I have the same kit won't start her yet got 3 carriers to do first

This is literary a good model not becouse it only looks good , becouse you can make it RC!! ,only using a gearbox whit engine,arduino r3 one , bluetooth,engine controler ,and servemotor you can make it rc !! "my english is not quite good but the torret need an engine to move right or left " and besides it has on the chasis if you can see It a battery port

Fantastic Build, Well Done 👍🏻

Hello. Can you send me a scan of instructions ?

Had fun watching this but a bit mystified why there's so much overspray.

On a scale of 1 to 10 how hard is it? It is really cool, but i'm scared that it is hard.

Really nice!. But no deck railings??.

👍

Really cool build but one question are the spring clamps nescessary and if yes what size are them👍?

Hans Ulrich Rudel would be proud. 😊

It's excellent - you don't need all the talking. Just a great job. Because of your work I'm about to order this! Thank You!

Super!

It looks cool 😎

At 3:34 why didn't you use the photo etched propeller blades that were supplied in the kit? Surely, they would've been far better looking than the thick plastic ones? 🧐

My elevator doesn’t go all the way to the top. Literally.

Not a very good build.

Für grosse Flächen nehme ich eine alte Kreditkarte um den Leim zu verteilen. So wird es gleichmässiger und es gibt keine kleinen Klumpen.

i am guessing there was a lot of sanding before making this video because some parts did not fit without a lot of convincing. Many of the the "bendable" parts broke for me and the hood has no spare parts so it is going to look bad no matter how I glue it. It is challenging as heck if you know someone who likes playing with bombs this thing blows up easily unless they have a magic touch. Likely to get hulk smashed and or junked from anyone not super patient and delicate.

Thank you for the videos!

rye field?

I'd be excited to see you try more figures! Keep it up. 1/16 isn't the easiest unless you're ready to experiment with blending and layering a bit. Flat coats of a single colour are your enemy.

?

🤣😂😂🤣 je veux pas vous dire la chose comme sa mais je vais le faire cet moche autant uniforme que la couleur de peau cet moche aucun detail ne ressort rien mais alors rien cet de la M...e applique toi mieux que sa y a un minimum tout de meme

Revell 1/16... and nothing inside.... fk revell always disappoint me but even more the traditional community of modelist that are happy with the mediocracy of that company.

Very difficult kit 😬 I had this one to

Says no glue needed but bits fall out so a bit of superglue needed to hold loose bits in while assembling other bits, whole thing a pain in the arse, need to file some tabs down a bit to fit.

I also wanted to ask if your Kubelwagen represents a restored vehicle in a private collection? I'm asking because of the odd choice of painting the door handles, windscreen frame, wheel hubs etc... in black, and the silver MG 42 muzzle and ammo drum.

I have the original Esci kit and while the kit is impressive given it's age, the one thing that bothers me is the wheels. The tires are too thick and the diameter of the wheel too small. If you compare it to actual photos of wartime Kubelwagens or to other existing kits, it is quite noticeable.

Adonde los venden

Poor video, as you've barely created a quarter of the items in the set.

Really like your videos and appreciate the hard work you put into each one. My one recommendation would be to select different music for each video. Listening to the same song over and over makes it hard to watch, I ended up muting most of the videos after part 2.

Hello, wich color are the brown? i see green is xf-70 tamiya, the brown code? Best regards.

7:48 no pudo encajar bien las piezas jajajaja

esta super mal echo, las partes no coinciden

Nice build!

' nice model hobby... what country made this model

Do the puzzles like this break apart easily? For example, moving from one place to another.

Beautiful ❤❤❤

Had major problems. Instructions were only in Chines. Pieces did not fit well , mostly too tightbut after having got them clipped in at some point doing next bit they invariably fell out. Conertina pieces like the bonnet (hood) snapped whilst being bent and plugged in. This afternoon it went in the bin. This is the first time I have ever given up on a model

I built it and had a little trouble with pieces not fitting or being fragile, but no important ones broke. I got it built in like 6 hours it's definitely a time killer

Not a good job paint, the wing doesn't make any sense, wrong deacals for the stuka. Sorry I hope you can improve next time

It seems like you are trolling the viewers here with your choice of background music, paint scheme, decals, and cannons installed backwards. And not deleting it is like a double troll job.

I just got this exact puzzle in the mail today. I've never done this type of puzzle before, it's for a gift (since I can't afford the real thing). How do you find the safest way to pop the pieces out without breaking them. I bought an xactoknife. Do you have a better solution?

What a beautiful truck. the video was relaxing.

I/m sorry my mistake I got you mixed up with models by Monte

also since you are nice enough to reply about my first question can you tell me more about the anchor chain set you got from shape way do I get two chain sets and the turn buckle and anything comes with the chain

what brand of wood decking you use I thought that scale company doesn't have the pre glue on the bottom

Absolutely great build , but why did you paint all four turrets top red only three were red ! Battle ships tops of the turrets we're painted different colors, so they can be identified by allied aircraft . that's how they knew what ship it is during WW2 . So we wouldn't bomb our own ships look it up ?