วีดีโอ

Mwahahaaha now i will be able to make your banana bread.😂❤

did u ever get it to track down the road right? i bought one in texas and tracked the same way. about to go out and start on it today.. mine looks like one of the bushings in the suspension is bad as well..

Good Job

Needed a heavier persuader 😂

Put a piece of sticky shelf liner, the bumpy stuff, and it will keep your cutting board from sliding. And it’s washable

I'm glad to see that you saved big money, big big money, by shopping Menard's.

Y'all just know what you were doing the end and the results showed just that but y'all learned something new ,but a small bird is bait for lots of things.

Cone is much better.

I would like to have seen more actual narrative and instruction. Not just distant camera work and loud music. You obviously know what you’re fling. But most of your visitors don’t. That’s eBay we come here. To learn.

I don't mind learning but tired of the life stories before the actual diy.

looks yummy but I couldn't find you video for the crispy apples..thx marie from canada

Looks really good...and made with love!!💜💜💜🤗🌴🌴

There is a learning curve when raising Cornish Cross. I had to buy larger cones and pull on the head a little bit to do the necessary business. I lost a few while learning but next time it will go much better.

I'm making this right now ❤️ hope I do it right!

Is that a stagecoach trailer? I’m having that issue on one

This looks so good and is such a good way to use a lot of sourdough starter/discard! Can’t wait to try this ❤

Good video! I have a 674D IH that I am needing to change out the tie rods on. Did not realize that two of them were that long. I have done lots of cars and trucks, and they generally have an adjustment sleeve that the tie rod ends just thread into. Now I need to see which part number I need for my 1973 model because there seems to be several.

Im glad your not raising them anymore......your clueless

You will love this fence. If you find the chickens flying out some, try the poultry plus 48". Or clip one wing! Premier1 is a trustworthy company. :)

Thank you so much!

Can I make them n place in the fridge for the next day?

Believe in Yeshua, He is the only begotten Son of God who died and rose three days later and loves all of you. He took God's wrath upon Himself, that was the punishment for everyone in sin. He died and rose to life to give you new life in Him. So you could be birn again, a new creation. He died for everyone and wants you with Him, to know Him and live for His glory. He took God's wrath on His stripes and that makes you whole. By belief in Him alone you can be saved, you receive eternal life and you need to spend time with Him to know Him. Attend a church, read and obey scripture. Be saved, free, forgiven, healed, delivered, baptized, whole and let Him show you how He is everything you need. He alone satisfies. Seek God and see your worth how loved you are and know who He is, read scripture. 💕 We are to live righteous and Holy because He said to and He paid for our way to live like Him. Ask anything in His name and the Father will do it amen. Hallelujah Praise the Lord God Almighty 🙏 Thank You Yeshua. 🙏 Father God Help people to be rooted and grounded in Your love and to obey Your truth. That they are living in the truth being taught by You. That they know Your voice and word. Knowing truth from errors, discernment. We use discernment by judging what we know. Take scripture and decide if God said it and if God would do it or not. Rightly judging because you know from scripture We are to live righteous, doing the right thing always and living in obedience to scripture, every word of it. We are ambassadors of Christ. We represent God, when we are seen Yeshua should be seen, His ways not ours. We should be living for and showing God, living for His glory. We are to be an example of Yeshua, for the world to see Him and want to know Him and know Him more. 🙏 🔥 2 Chronicles 7:14 says, if My people humble themselves and pray and seek My face and turn from their wicked ways I will hear them from heaven and heal their land. 🙏 💖 People need to turn from their wicked ways, Yeshua paid for it. That's God stating it in that verse and there are more verses. People need to repent, to be cleansed by His blood and live Holy because He's Holy and righteous because He's righteous. Our God said to stop sinning in many many scriptures and He paid for everyone to be cleansed of sin (Isaiah 53), and to live how He said. He dwells in the Holy temple (your body) and said not to defile the temple. He said to defile the temple is death. He's always serious about everything He said to do. He's just as serious about what He said not to do. We are to live in obedience to His law, which is all of scripture, every word of it! He dwells within us all to be with and lead us in His ways. 💕🙏🔥 🕊️ Deuteronomy 28 there are blessings for obedience and curses for disobedience. The whole chapter, and verse 46 is one example of generational curses. These go into the following generations, the 3 and 4th. Our children pay the price for our sin. God has said to stop sinning. Scripture says how you are sending consequences to yourself and to your loved ones, children. By God's law you are. Yeshua is worthy of everything He said and paid for, so I implore you to do as God said. Yeshua said If you love Me you will obey My commands. Love Him with all your heart, mind, soul and strength.💖🙏🕊️🔥 obeying His every word and in that is life more abundantly. Praise God so Awesome!! Hallelujah Yeshua 🙏 God loves all of you and you are worthy to Him, Yeshua died for all because God loves everyone he sent Him. Come know Him, Yeshua call upon Him 💕 the world knows Him as Jesus, He answers 💕 Thank You, Yeshua for Your obedience and love, even unto Your death You obeyed the Father 🙏 Hallelujah Praise the Lord God Almighty 💕 In Yeshua's mighty name 🙏🔥💖🕊️ God is always faithfully Himself and so awesome. Every way He said He would be in scripture He is. Every day ages and ages of Him never changing. Hallelujah Yeshua Praise the Lord God Almighty.

How old were they?

10 weeks yields a 10 to 13 pound dressed bird.

Use road cones modified to fit. Perfect hug cones and 1/3 the price of th ed stainless steel units. Plus a saw horse and 5 mount well to a 6' 2x4. Don't make it so hard on yourself. Simple knife and your done in 3 seconds.

Dude....Stop....just stop! Your method of killing the birds is ludicrous! You need to do this right. Your birds are suffering needlessly! #1. Use the hugging cone. #2. Pull the head thru the small opening #3. Take a very sharp knife and cut the carotid Vein on both sides of the neck. #4. Wait until the bird bleeds out. Use the heart as a blood pump to completely drain all blood until the bird stops moving, it is now clinically dead! #5. Take the limp bird and dip into the scalding pot. A little Dawn really helps. #7. Place in the plucker. #8. Cut off head, then process normally. You will not have that bloody mess, traumatized kids, flies, that iron content smell and messy clothing. This is not a guillotine method. Do this and do it right, not your way. Have respect for the birds!

Thanks for showing what you did. Gave me some ideas to work with.

Wonderful to see the braces! You might want to add a couple to each of the two center beams, on the side of the lean. Where did you get your splitting wedges? I've been looking for some. Tapping along the split line with a ten pound sledge hammer will help it to split, right were you want it too. Lee

I'm as nervous as a long-tailed cat in a room full of rocking chairs, as I watch you work under that barn. Your cribbage should be 100% level, with a wide base. At least on camera, they all look to be leaning. Wind load is a powerful force. It's pushing on the barn all the time. It would be great to add some 45 degree posts to the seal plates on the east side at least. Set posts in the ground, as deep as you can get them, tamp them as tight as possible, then put the 45 degree leaner against it. Then, lag the other end to the barn, with a flat kicker board lagged above where it joins to the barn, to keep it from slipping up the barn. You desperately need more cribbage under the barn. Lee

It was great to see more cribbage, please add more under the entire barn. Thanks, Lee

Good video but he's killing that Ubolt, doing it dry with no oil, no spit, no water, no WD-40 no nothing. should have put a little something on it

Please, please, please add more cribbing! What you have is insufficient! If you so much as bump that barn, it could collapse.

Talk to every friend you know and round up as many railroad ties or old square beams and put at least 6 cribbing towers under barn, where the best structural support is. Then, at the very top of the cribbing use 2x6's which you've cut to a wedge shape and with a sledge hammer, drive the two wedges together, making the cribbing stack tight. You are not trying to raise the barn, but hold it where it is. DO NOT DO ANY MORE WORK on beam or wall repair until you have done this. Working under the barn is not safe until you put the cribbing in. My barn (40x70 with 11ft high basement/ground floor) was almost as bad as yours, and it has all been fixed. You see, the problem is, your barn has already moved. Somewhere on that back wall is a spot that is carrying the force load, which holds it in place. If you relieve that point, the barn will slid off the wall and collapse to the floor. If you're under it - you're dead! Also, on the posts you've straightened, either dig a post hole and set a post or drive one in, about 2 to 3 feet away and then attach a good sturdy 2x6 or 2x8 to the beam and the post. That will help prevent your post from slipping off the pier. Like you; when we started farming, we had nothing and no equipment to do anything with. There are friends and neighbors who are willing to help or loan/donate some of the things you need to safely fix your barn. Your barn floor isn't log beams, so wherever you put the cribbing towers, add x-bracing to the old floor joists directly above the tower, so the joists don't move under load. Great video and I just stumbled across it this morning. Best of luck. Lee

If you had harvested them sooner the weight would less cost would be less

I raise 200 a year getting ready to butcher our last 50 on December 11 and out of 200 I've maybe lost 4. By the size of yours they are over fed which causes heart attacks. Our average 4.5 to 5 lbs. I have mine (50) at a time in a 10 x 12 she'd. I feed Joel Salatin feed from his book ( pastured poultry profits) since I switched to his feed our chickens have did great. You don't need alot of area to do this. I raise 90 percent of my food on less than 1/2 acres. 3 flocks of layers and building a new barn for a 4 the flock, we have a 6x8 hoop style tractor for 5 turkey and I have a 8x16 platform for 3 pigs which we just butchered one yesterday. And we just started meat rabbits for more protein. Good luck.

that looks SO GOOD!

Check TH-cam for chicken processing classes. It will help also Patreon has channels that does chicken processing so you can see everything that not allowed on TH-cam.

B.O chickens you can continually to breed for more chickens.

I was wondering if your strainer attachment is still holding up? After watching your video, I was excited about getting one of these, but I noticed that the ratings are very poor because many have reported that it breaks easily (particularly, the strainer cone that the auger slips into).

2 things to make it easier. Spray it with wd40 or similar and use a heavier hammer made for metal, not wood. 😊

So you did everything wrong and blamed it on the birds. Let me say I have tried different types and the CC has been by far the easiest to raise. Done in 6 to 7 weeks. Other breeds died in the heat wave but mine survived. Sounds like you don't have a clue what you're doing. So yes please stop raising them. Try reading a manual next time. I mean you broke almost every rule there is lol. I am surprised the other 50% made it! GL! MAYBE YOU SHOULD TRY GARDENING INSTEAD. Signed Sean ( the Chickenman) Taylor. Duncan, Oklahoma. USA. God Bless and have an awesome day! mAYBE TRY oRIGAMI NEXT TIME HAHAHHAHAHAHAHA!

Thanks for the video! These were huge birds! Did you weigh them? What was your biggest and smallest?

How to realign trailer axles and then take it to a shop... WTF. Just delete this. You didn't show anything except for a tractor for some reason.

Not at all happy with these birds. Poor critters. All started out as healthy looking chicks from Tractor Supply, to put under a broody hen. These were the very last chicks they had for sale. After successful hatching, we put hen and chicks out on mixed grass area with safe locking night shelter. As they grew with plenty of food and extras, they feathered out slowly and sparsely. They started growing faster and their feet, knees, and legs got huge for young chicks. They stated to want to sit down to rest while they ate. Two became deformed and eventually died , one got taken and I have two hens left that are huge and have to waddle to walk. Genetically Engineered?? Deformed, but very heavy birds. I guess to keep them from breaking their own legs trying to get around you had better harvest them early. Never again. Poor critters.

Wow, that sounds yummy!

I did 29/31 CC last summer and it went extremely well. I raised them from end of July to 2nd week of September. 3&1/2 weeks they were in 4x8 trailer for a brooder until feathered out enough to be out on grass. Then I had them on grass in a 10’x10’ dog kennel that I moved every day til 2nd or 3rd week of September when we processed them. This year I am getting them around September 19 and I’m a little nervous about it due to cooler temps. I want to do the same thing as last year but I am facing the challenges of cooler temps and I hope to not lose a bunch due to the cooler weather. Processing date is around end of October first week of November sometime. How did you guys lose birds due to weather?

There’s a reason they are the most popular breed of meat chicken. I’d encourage you to learn how to better raise cc meat birds. Once you learn the tricks to raising them they do great.

So big wow. Will keep mine for the festive seasons to be this big