วีดีโอ

🧏‍♂️Pro tip.. (I run the same transmission cases, similar motor + gearing, but) ..Use 2 motor plates not 1. Install both together Using longer screws, & I like to put a screw w.Lock Nut in the top gear cover mount hole instead of putting the gear cover on.*Cover wont fit over the 34t pinion anyways. **I know this info is about 5years to late, but it is what it is, & I cant change that.. Far as i know there's no single motor plate available for Traxxas 2wd truck that won't bend when using any 100mph+ capable motor, or is there any video's on TH-cam showing this helpful info, so be the first one. Ps; another way to achieve the double motor plate for less money is to purchase the RPM trans. Cases and use that motor plate on the original stock Traxxas plastic cases. Bolts right on and honestly wrks little better, but not as much clearance can be made for bigger motors that require so much room you have to file down the two corners of the cases where the motor contacts. And don't forget to adjust the motor end cap on the shaft side only over to next set of holes to have the motor wires going to the ESC pointed inward. That way they. Don't get damaged after flipping over backwards or sliding around backwards into a curb. Use Traxxas HDuty spur-gear shaft, Robinson racing idler gear, HR HDuty dif locker and dif case, proper shim the dif and spur shaft so no side to side movement but not binding when spinning transmission by hand. Hope that helps ya get over 100mph. I know it can be done. (128pb on 6s CNHL bat, stock chassis & body, GRP's, XLX esc, Castle 1515-2200kv, 34/34)

Amazing

How much weight is that??

Wat gears with I use for drag 2050kv motor sidewinder 8 esc

Sick build 👌🏼

I have a rustler 2wd and 2200kv with sidewinder8 my gearing is 33/36 I have grp tires why when I pull throttle my rustler seems to be spinning out like doing donuts?? Am I hitting the throttle to hard am I supposed so lightly hit throttle slowly till it starts to gain speed?

I'm really impressed with this build. I can tell a lot of thought time and effort went into the build itself. The rustler is one of my favorite RC's it makes me want to go do it to one of mine tomorrow

You can't just do show and tell . COM'ON man you've got to drive that sucker.

Nice set up

What wheels

Where did you get the pinion and spur gear?

Can I get a parts list and maybe links I’m trying to get my rustler to this !

Aluminum is soo sick but when you crash everything bends and gets wacked outta place some parts are great for Aluminum but plastic is better for crashing rpm is great it just snaps back into place when you crash

How do you get to 3434 to fit on a Hr transmission. I’m running 3430 cause I can’t seem to get it to fit

Plastick is stronger and it dont bend for 500$ less you can run 115 and tires are bad not for street top end

Tire name?

Tyler’s?

Great build man. This is what But a bit much much aluminum for me my rustler is a simp for curbs 😂😂😂😂

Not much of that is still rustler lol

Let me see it run

Don't see why everyone is running mamba's. Let's see a stock rustler hit a 100. I'm running a vxl 3s system and I 100 easily. Some minor modifications and it's easy. And no those camber links aren't for the Stampede they are for the Rustler bandit and stampede. Could be another one but yeah

Another year would be dope to see it run happy New Years

Hi what kind the tires you put in there and what the name I like this tires I trying to go buy thank you

The full aluminum build looks amazing

Where'd you get the tires?

There's no way this car going 100 mph

34_34 ? ½ Ratio? No over heating? Or puffin brand new after new lipos? I need to know.

Sweet have mine coming thats what i wanna do to it im going to try 70+ AND IDEAS FOR THAT

I thought the 2200kv motor I put in my stampede 2wd was big but that castle motor looks monstrous

How much did the whole car cost you not to remote control but just the card self to get a 100 miles an hour with everything on it tires wheels everything and my guessing about a $1000 I'm just taking a guess

Nice!!!👍👍

I am a little late to the party, but why would you add a bunch of weight to the car when you can just get a wheelie bar?

I've got setups similar to this and other speed monsters and if u can keep it on thr ground it will do more than 100. My 1415 did 114 on 6s...

That is cool 👍👍

Let’s see a pass

Lets see it run!

Brad

That’s awesome

I need a tutorial or parts list replacing spur.

I have the s4 compound tires and cant get ANY traction. I want to know if you do with yours or if I got an old set or bad set.

Nice setup I got the same color edition rustler just threw my 1512 1800kv blx 185 esc spooled geared now just waiting on my 17mm adapters 😈😈😈

If ur running 34/34 what did u need and could it work on a 3800kv and can I get links of everything u used did u need a adapter for that spur gear?

What spur and pinion u running

That’s a nice rustler man lol. I’m planning on doing this type of thing with my xl-5 brushed rustler that I had emptied all the electronics and stock remote from and sold off. I even sold off the stock wheels for it. I’m attempting 80-125 mph with that rustler on 3-5S lipo power and about 130-145 on 6S. That’s the goal once I get one of these huge 1/8 Th scale combos for it. 34/34 gearing or 34/30 if I could do that. Going to go with s Futaba remote as well. By the way where do I buy gears like this at ?..... what brand are they ?I got mod 1 25 pinion and mod 1 40 spur inside my Traxxas E Revo 1/8th Mamba Monster 2200 KV truggy and I think on 6S I’m easily at 83-90 mph.

Want to sell it to me bro?? Or do u got a parts list??