วีดีโอ

What about down work intermittent?

Jefe como puede tener tu número necesito algunos tips con mis máquinas

Thanks buddy helped me out. Stupid lift at work would never let me drive and was gettin on my nerves!

How you get through oil cap off, mine just clickd

i have a jlg 3969 , cant drive. why?. for lift up/down, and steering ok. only no respon for drive foward and reverse

hey buddy, Idid it twice on the same machine but I couldn't activate it now I don't know if the control stick is bad

Very helpful video!

Good job👍

Yes bro it's really hard

Sir My Genie Lift S65 Emergency not working from Platform 😢

Hey brother sj3226 it seems like the cylnder gets stuck randomly I'm not sure what to do

Hey working on Geni XC-60 trying to remove the Main chamfer pin front steering axle have any info best way to do that.

Hey I have a sky jack sj 85 AJ that works From the ground control but when you switch to the platform I is in constant alarm drive and boom functions don't work

It will always start 👍

Changed out the cylinder seals - now goes up suuuper slow. Is there a bleeder valve?

Thank you

Thanks for your help brother.

Tengo una máquina como esa y no quiere funcionar que hago por que no hace nada ni se mueve

Question I changed the control box on unit from a bigger unit how do I change the model ?

How would I lift the SJ3219 to replace cylinder seals? All fluid blew out now doesn’t raise 😏 Been looking for a manual crank or something to get it up.

U skipped the repair bro

I have a Skyjack III 3226 Scissor Lift having so issues. When I push the lever forward or reverse, the pump starts running lift doesn't move, after about 6 seconds the pitch changes and then after another few seconds the lift finally starts moving. But it doesn't seem to move very fast, and there is almost zero speed control. I have a video of it, I just don't know how to send it. Any help would be greatly appreciated!

Hi Thanks for your videos. I have a jlg articulating boom lift.. Thats been sitting outside for months.. So i added distilled water into the batteries and charged it for a few hours and started moving the boom around Manually.. So i left it to charge all night. Now the next day ,it doesn't turn on.. I only hear clicking noise in the ignition relay.. Any help please

seriously if you need a video to replace batterys ur pretty stupid,,

Hi! My axle do not retract or extend, it suck in extented genie

Hello Manuel, I am a lifting machinery technician, I have a problem with a GENIE S60, what happens is that the machine when I am performing a function starts to walk by itself, that is, the brakes are released, when I turn on the machine the brakes are fine, it does not move but if I lift the boom or take out the boom, the equipment starts to walk without me operating it, I have already checked the brake valve and speed two, both are fine, I hope you can give me support👊🏻👋🏻

Thank you so much brother!! You’re great!!!

Hey do know why it wouldn’t be going up and clicking?

Good job bro

Bro how to calibration upload video

What could be wrong if it lifts but lifts very slow like its straining to lift?

I have a jlg g5 18A the machine will only move forward or backward with gas pedal to the floor but just creeps any ideas thanks

What abour the rocker switch on top off that same joystick. (Extend ando retract) Has the same issue, joystick didnt work, replaced it with a new one, swing and lift work but not the extend options

I want one but this reminds me of my trip to asia. I wanted the cheap lady , she too made wonderful sounds although looks & felt a bit shakey. Long story short i had a price to pay after my purchase, lots of fees at the doctors lol Did i learn? Idk in here looking at more Chineseium stuff 👀

Great overview, definitely worth the money if it lasts a few years.

Do you ever bleed the hydraulic lines? If you replace the steering hydraulic cylinder would you bleed the hydraulic lines before tightening hydraulic lines on steering cylinder?

I have a Genie s-60 X the boom will not move in or out

Question jlg 2032es won't move forward or reverse. Everything else works. Code 256 but the sensors seem to be testing good

i have a genie s60 when you start it it start to creep forward it gives me a flash code 54 it wont drive or reverse

Hello, Mr Manuel Diaz. My skyjack 3219 making a noise Clark,Clak,Clak,..... When turning left or right just on the begining when you Puch the Botton joystick of the steering. I'm waiting for your réponse. Thank you

Hello my fiernd

Pretty sick video subbed

I have a jlg 34 ha older model it has jerky hydraulics and jerks and stalls engine when driving after you let off lever?

Good Job Mr. Manuel

My scissor lift dont want to disable going up what do u think it is

learn how to film, then post very bad video

12 bolt probably more then likely for emergency down system and the 48 is to operate the machine

I have a lift that won’t go up all the way and only one of the stabilizer bars are engaging. What do I need to do to get both stabilizer bars moving?

Everything looks so accessible

Easiest rear seal in the world lol