วีดีโอ

Dude, thank you so much. Great video, precisely my problem in 2011 3500 Mega Cab, now I know what I'm doing tonight to keep busy pending election results. Thanks for great video.

Nicely done. This or the Lippert version is an absolute must!! Our 2022 Coleman came with the standard Lippert frosted, textured glass pane. In the mornings the sun would hit that window and act like a 500 lumen LED light panel and make it impossible to sleep in past sunrise. We rigged up a foam board panel and Velcro to get around this. That did not look very ...classy... I put a Thin Shade in my camper a couple months back. 2 weeks ago we made our first trip out with it installed, and boy oh boy, what a difference that made. I installed our shade in the upside-down position as well. This is a great upgrade to your existing, fronted window or mod to your solid, windowless door.

Ate the both the same part numbers?

Great job...getting ready to do a door window install on my 5x8 cargo camper. Can you tell me the thickness of the door and the thickness of the window inside the frame...that would be a big help . My door is just shy of 1 1/2" thick....Thanks!

No sealant around the window?

Well done!

I don’t get the plastic piece… the turbo is pulling in air regardless.

I watched four people who had vidios about this,who all made mistakes(should have been how NOT to do it) you got it right the first time.CONGRAGEULATIONS ON A JOB WELL DONE. (MUST BE X NAVY LOL).

Does this middle one control the floor/defrost? My floor vents only come out of my defrost. Can’t fix it. Please help anyone.

Nice job!

always keep the wife happy

It is a highly bigfoot area. A few campers were scared from there a week ago around 3am

I was wondering if you could post all the measurements to the square tubing ?? Of the 4 pieces please

Nice job. Lippert makes a similar version but it uses little plastic catches instead of screws. It’s fine, but I think I like the version with the screws better. A little bead of proflex across the top and sides probably wouldn’t hurt, if nothing else to keep the inner seal from aging.

Where did you get the weights?

Great video. Doing this tomorrow on ours. Doing our shade from the bottom as well.

Start by saying to the wife if you want it your way you do it. Otherwise, hold my ice tea and watch 😅

Fix that leaky exhaust manifold next.... Drivers side is " great" fun to remove...bwahaha

You're never off the hook bro 🤣🤣🤣

Great build.. plan on doing the same for mine and my dads RV..

Any butyl tape?

Nice job on the install. I’m planning to add one to my RV soon. I also plan to have the shade raise to close.

Thanks for sharing

Thank you for this video! I have the same problem but looks like an easy fix

What year is this??

I took mine out and the turbo housing silencer sounds good now love it.

Hey guys great video! So I just found a deal on the physical railing patio part but they did not have the hardware to mount it to the door (both the frame hinge and floor mounts) my question is where did you buy your mounting hardware from? Thanks again for the help!

I read a lot of reviews on Amazon about these actuators only working for a few months after install and then breaking again. Is yours still working fine a year later?

Hubby said your video was very helpful. Looks great! Thanks. We'll be doing ours soon.

They year and engine size would help greatly! And the blend door actuator is on top of the box on most dodges so not sure which actuator u changed.

You may want to add to make sure its cooled off before you shove your hand down there.. lol

Thanks I have the same problem. Changed the one behind glove box. That wasn't it. I'll try this next pretty sure this will work

Great info - Where did you purchase your mudflaps for this project?

What was the measurement from top of door to top of window

What kind of jigsaw blade.? Teeth? Wood vs metal?

The foam is there to absorb moisture and the plastic piece is there to direct air to the turbo and more in paticular cool the veins. Check the foam and if its falling apart remove it but leave the plastic piece. Its not a "silencer" and it will in no way eliminate noise. The reason the turbo gets louder when removed is because there is more overall air volume and its not directed to certain spots. Aftermarket intakes are the same way. There all sound,a smidge better throttle response and minimal to no felt power..HOWEVER ITS YOUR TRUCK DO AS YOU WISH

I've put hundreds of thousands of miles on 2 6.7 Cummins and haven't had any issues with foam getting into turbo but I guess it could happen.

Thank you! I have a question if you don't mind. I have a 2014 Ram 2500 with the Cummins and 45k miles. The heat does blow but it's not hot like it should be, kind of mild heat. Could this be the issue? I don't think the truck is old enough or has enough miles to be a heater core. The coolant level is fine. Thank you in advance.

Wow! That looks cold. brrr I'm a new friend here to your channel. Keep putting out the good stuff.

Good video. I had the same problem on a 2011 Ram 1500 Sport. Only difference is I have an outlet where I needed to remove the trim and remove another screw. I only have one arm so, if I can do it anyone should be able to. Thanks.

What year is your truck? And what issues did you experience besides the clattering door? No heat less air flow?

Just a add I finally did this to my 2011 last week . When I took the 4 screws out it seemed attached in the middle somehow. I pried off the trim piece on the 110 outlet there was another torx screw on there . That was holding it on so I had 5 screws .

So with further research I decided to remove the foam and put the plastic part back in. The plastic curve just makes sense for air flow

I just put my (used) BW gooseneck in yesterday, in my 07 Ram dually. It's kinda a bitch by yourself. lol that stupid carriage bolt fishing is a PITA without the BW fish wire. I made one from some galvanized wire I had, Was a tad too soft of wire, but it worked.. until it didn't on the passenger side. I now have a 2" carriage bolt and a bracket laying inside my frame-rail LOL!

Looks like you missed the screw behind the trim bezel that goes around the 110v outlet... Was it missing already or did it break off when you pulled the HVAC controls out?

Hey I have a 2019 Ram 2500. The problem exists even in Ram truck up g too 2021 year. Blend door issues.

Looks great guys! Awesome job.

Duuude! You missed filming the sunset there, it looks great on pictures. We've never been there but we've really been planning to go, and we're very excited. Thanks for the video.

My 2011 Dodge 3500 has an issue such as this except after I turn the key to accessories (waiting on the glow plug light) a rapid clattering noise starts after a short pause even with the A/C is in "OFF" position. It may or may not stop upon starting the truck and if it does stop, it blows and directs the air just fine. But if it doesn't stop, it only blows out at the feet. Do you think it's the same issue as shown here?

Is it safe to assume that’s the only blend door actuator that could get stuck on the floor?