- 2
- 227 639
a Baby a Beard & a Beer
เข้าร่วมเมื่อ 3 ก.ค. 2019
Baby Brezza Formula Pro Dissambley How To
A quick video showing how to take apart your baby Brezza Formula Pro Advanced for routine cleaning and then put it back together. The manufacturer recommends this cleaning monthly, but I've found if you live in a humid environment it's good to do it weekly or every package of formula. It also helps to clean/rinse out the bottom attachment/tray after each use to help prevent formula gunk and residue from building up. It is inevitable that it will build up though which is why I recommend cleaning at least weekly. You might be thinking this defeats the convenience of the machine, but as long as you are proactive and keep the machine clean you will always have an instant bottle of formula ready for those OH SH!T moments when you need a bottle and you need one now! Thanks for watching and stay tuned for more videos.
The only real trick/gotcha is when you remove the top mixing paddle/disk. As soon as you pull that off the white gear on the bottom of the container will fall out....inevitably into the bottom of the sink/floor/garbage disposal/etc as it did for me. Also, remember that you'll have leftover formula in the bottom that 1) you don't want to waste....this sh!t is expensive and 2) will end up making a mess in your kitchen. Having a big bowl handy to dump and tap the leftover formula into is a big help....that and doing this over a sink to contain the mess.
I'll post another video soon of the full process with the formula included.
The only real trick/gotcha is when you remove the top mixing paddle/disk. As soon as you pull that off the white gear on the bottom of the container will fall out....inevitably into the bottom of the sink/floor/garbage disposal/etc as it did for me. Also, remember that you'll have leftover formula in the bottom that 1) you don't want to waste....this sh!t is expensive and 2) will end up making a mess in your kitchen. Having a big bowl handy to dump and tap the leftover formula into is a big help....that and doing this over a sink to contain the mess.
I'll post another video soon of the full process with the formula included.
มุมมอง: 161 568
วีดีโอ
Baby Brezza Formula Pro Daily Cleaning Tip
มุมมอง 66K5 ปีที่แล้ว
A quick daily cleaning tip for your Baby Brezza Formula Pro Advanced or as we like to call it the Baby Keurig bottle machine! This machine can be a lifesaver for the stay-at-home mom, stay-at-home dad, or new parent in general. It makes a warm, ready to eat bottle for your little one in seconds, which we all know can be make or break. All of this convenience does come at a cost though: money an...
🙏🙏🙏✝️✝️✝️
Perfect. Thanks brother.
Thank you!!!
OMG THANKS!!!
Thank you for sharing!!
Not the disassembly video I was hoping to find. One of the buttons stopped working on ours and am just needing to know the right steps to take to actually take it apart
Jesus Loves You
Many thanks…. straight to the point and easy to follow…. watched 10 other videos and still couldnt figure it out.
Saved me thanks
Sin Bla, Bla, Bla al punto si pérdida de tiempo Gracias
What about the water tank
I am worried. My setting powder was suppose to be at a 4 which I put it on.. Today I decided to check it was at a 1! Idk how long this has been going on. I am so worried now
Thank you!
How do you remove all the water from the reservoir inside?
THANK YOU! This really helped. Also, thanks for making it a quick instructional so we don’t have to watch for 10 mins to get to the point 🤣
Saved my ass bro... thank you so much
Life saver
Straight to the point! Love it! Very helpful!
Hello , I have a question if the machine is not warming hot which part do I have fix ???
Great video! Thank you for this.
POV: It’s 3 am. The baby is screaming, and you’re there trying to make a bottle, but the machine is flashing red telling you to clean it, and you’re there swearing at it for not working. After 4-5 min of getting mad, you take your phone, TH-cam it, and swear at yourself for not trying this sooner.
Literally 😭
I really need your thoughts on this. I noticed a few things with the one I bought and I want to ask if it's normal or if it's a defect so I could return it. 1st: My measuring wheel does not lay flat when placed in the Powder Container. I tried pushing it but it always seems to be tilted to one side. 2nd: Due to the measuring wheel's tilt, after placing the locking cover, the stirring wheel does not click properly. 3rd: After several attempts to get that stirring wheel "click" and stability, after turning on the machine and using it, the powder container starts bouncing and as a result the stirring wheel becomes loose again. I'm this close to returning, looking toward to your valuable response. Thanks!
Thank you!
Thank you we just got it like two days ago and I needed to make a bottle for my baby when it gave me a clean funnel light. Your video helped greatly! Thanks!
Thank you for being so straight to the point. I may have gotten rid of my instructions before I had an incident where someone babysat for a week and put the wrong powder in my machine and I ended up with an error code which I figured just taking it all apart and cleaning the whole thing would solve it because they had an overflow and didn’t tell me and then everything got stuck because water got in the top where the powder was seizing it 🙄 I thought I was losing my mind when I couldn’t get it apart thinking oh no I’m going to break it when I was already doing it correctly thank you for reassuring me !
Thank you, you safe my life today
Thank you so much for this, I had accidentally thrown out the manual and had no idea how to get that orange part out, and thank you for not making the video longer than it needs to be and simply showing how it’s done!
Life saver. We washed ours and Gunk built up, and I felt like if I pulled the orange part out it would break. Watching this helped 100%
I had the same problem ! I finally got it off after watching this video.
Thanks so much.
Why is my baby brezza making high annoying noise when I use it - I am struggling with it
The gunk isn't there. It's in the hole that it comes out from, where the powder is. This will cause watery bottles
Straight to the point. Good shit.
Thank you! To the point! couldn’t get the orange parts out, thanks for the help!
I can’t get it out. How did you get it out?
@@haleybodie5720 same how do u do it
@@user-xh8ix2nu6e we ended up just pulling really hard. Like you think you are about to break it but just pull the top piece of the orange really hard and it will come out
@@haleybodie5720 haha I ended up figuring it out and pulled it really hard, thought I’d break it but it worked. Thank you for the response :)
Just make sure once a month run vinger through mechine so mold dont grow . I ussaly fill the water tank half water half vinger then keep hitting the water only until the water tank is empty of vinger. Then let it stand for an hour . Then fill water tank with clean water and just run the water through mechine until vinger is all flushed out
What kinds of vinegar do you use?
Might aswel mix it manually if you keep cleaning the damn thing
Yes thats too much work and made me change my mind buying it
Very straight forward thank you for the help awesome video.
When you put the black container part on top of the axle is it supposed to be flush with the top? Mine is not going down all the way and then I can’t get the lid to lock
If we dont right away clean it, how many times/ bottle can it be used before cleaning it?
Thank you for getting straight to the point, and not talking for 5 min before, unlike some other videos! 👍👍