วีดีโอ

Is there anyway you could put Tracker V12 and varitrack on onedrive or dropbox? Trane does not support it anymore and I saw it on your desktop. You would be a literal lifesaver

This is a game changer indeed 😮

Nice work

I've been working with tools for a long time, but I wanted to watch the video because of the picture on the back of the package. For some reason I thought that the handle was removable as well. Turns out I just forgot how to count nut drivers😂

You 100% *can* use a 3" wood cutting blade. They just did not include one with the tool.

The breaker for the sub panel is to protect the wiring to the sub panel from over heating and 6ga. wire is way too small to be running on a 100 amp breaker, the wiring will become too hot and could cause a fire. 6ga. wire is only good for 60 amps you need 2ga wire in order to use a 100 amp breaker, that can vary slightly depending on the temperature rating of the wire but not nearly enough to make this installation safe.

What if you need to take the screws out and take the door off to do a repair on it or anything?

Does my laptop need to be connected to the internet to use this tool?

Looks good. I ordered my clamp tool yesterday from Amazon. The clamp tool I ordered (which you demonstrated) was cheaper than the crimp tool, which squeezes on the copper band and requires a "go" - "no go" gauge to make sure the crimp is tight enough. I'm an electrician, not a plumber, so I went with the cheaper tool for my personal plumbing. Thanks again.

I just googled this question and your video came up....thanks bud...saved me a trip to the store and some hassle....

No pressure relief valve

Thanks for the explanation.

Is this a constant volume unit for single zone or is this for VAV boxes? If it is a unit serving VAV boxes, can you tell me how the unit controls can be programmed to make the adjustment to modulate the VAV box off the room sensor? Thank you!

where did you stole it ?

Where is the best place or best book to learn controls?? From beginning to pro??

Thank you this video was very helpful and informative. Great job

I’m about to get into this side on hvac controls I’m kind of nervous

What do you do in the situation that your old transformer had no ground wire and the location of the transformer doesn’t have a copper ground wire or any other type of ground wire?

So it’s terrible as a sink? Why?

That is not a sink. There is no sink. It is simply a pimped up street water tap.

I wants to get one but it's pricey for an indoor grill it's $280 on Amazon I can get a nice indoor girll half of that price

I have had one for a couple of years. I can attest that what he says is right. That said, I've never needed any more than two days and that's a snap. Have used it to keep wild hog cold for an 8 hour drive as well as freshly caught salmon - it does a great job. Mine has the wheels and handle which have been a lifesaver when its heavy.

You showed the pruning blade in the video. I could see that the brand is Milwaukee. Can you please tell which exact blade you used (including TPI)? Thanks

Hey buddy, how do you like your Navac since its been 3 yrs. I just found your video love it thanks for the full detail. My question is how long did it pull down since you are pulling the whole system. I'm looking to buy it any more info that you can give me would be appreciated.

i get inspired when i see people of colour in hvac

Impresive

How long cable ?

Zero-G hoses are a waste of $$. This cheap crap will spill water out from under the cheapo plastic collar. I just LOVE getting my shirt and pants wet whenever I use it. Cheap Chinese POS.

Where does the control wire at each room mounted unit go to? how does it know when to send coolant?

good review but i would do away with adding background music, it makes it harder for people to hear you talking.

Thanks great video!

Hey Jeff!! It has been a long time. I just bought one of these of FB and was looking for a video and there you are!!! Hi!!!

This software monitoring need activation code ?

Can't see what your doing,

Good stuff man

I got these but haven’t used them because they don’t have that lever switch on the side but ima take your word for it

I used to start those units up

What state are out of ?

You forgot to turn off the power of electric water heater at the service panel

Tôi đang tìm hiểu về thiết bị này và video của bạn giúp tôi đưa ra quyết định 🎉

The box says there is a star 15 and a star 20. Where are those? Mine doesn’t have them either

Put the link for the connections you have on it

Very helpful, thank you!

According to the National Electrical Code (NEC) ampacity tables, the minimum wire size for a 100 Amp circuit is: 3 AWG Copper. That 8 AWG wire is severely undersized and may overheat; and as such is a fire hazard. I believe they misunderstood the directions. Each breaker requires an 8 AWG wire since they are 40 Amp breakers. If they were wiring the hot water heater directly from the main service panel, 8 AWG wire would have been appropriate. However, they are using a subpanel which means it must safely carry the entire load of all three breakers. The breaker for the subpanel is under-sized for the application. The water heater is rated for 120 Amps and is being supplied by a 100 Amp breaker. This is much less of an issue than the wire size but should also be addressed. I hope they reconsider their installation and upgrade the devices to spec.

Thanks For The Advice 👍👍

Thanks a lot... now i have an idea how to make a DIY machine

The story of my life - due to how I hang curtains that end up hanging half way out of the wall. This time, I do have one stud to work with. Thanks for your video and now I'll see if I do a good job or make another big hold in my wall. 😅 Enoy you day!

Great review bud. Just purchased one and can't wait to put my hands on it !

Good video I just bought tools

Appreciate you.