วีดีโอ

email bg, wariorstore17@gmail.com

mungkin bisa baca data yg direceived menggunakan app seperti hercules. Saya belum sampai ke pembacaan RFID, hanya melakukan tes kuat sinyal. Tapi secara teori jika komunikasi sudah sesuai harusnya RFID tag bisa kita baca menggunakan SDK yg ada.

hello,this is Rosy from China,we are spcialize in UHF reader,any interest in this, you can contact me

@@rosy4806 do you have the program for the Arduino?

Boleh, dm ig aja ya: simbolon.michael

Waduh ngk punya lagi

1. UHF(Ultra High Frequency) RFID Reader 2. I dont have idea 3. You can use microcontroller just undestand how to comunication and process the data 4. Acually every card have a ID 5. Use RS232 to usb converter

@@mikebolon5912 okay thanks, for #4 how do I make it to where I can see the name on card, card number, ccv, and expiration date?

Hello,this is Rosy from China. For the third point, you can turn off the beep/buzzer by demo/readersoftware, we are spcialize in UHF reader,any interest in this, you can contact me.

Actually i dont have the code. But you can use arduino rfid code. Make sure you connet the reader(rs232) to converter arduino(ttl).

Its should be could. to make sure you must use serial to TTL converter to read data to arduino

actualy it depend to your tag fraquency

How did you order it?

@@sherifossman Ali Express

@@sherifossman hello,this is Rosy from China,we are spcialize in UHF reader,any interest in this, you can contact me

Wah ngk recomend utk games

Ngk ada merk bro karna sanking murahnya. Wkwkwkw

Belum mas. Itu tergantung ke implementasinya, ini hanya membaca TAG RFID dan ID nya

www.tokopedia.com/search?st=product&q=Long%20Range%20UHF%20RFID%20 you can check this link

no i have my own rfid. and i can give you the code and the circuit in arduino if you buy from me.

Please i'm about searching What type of uhf reader can i work with ? Any reader is able to be connected with arduino ?

@@sidhomamine1323 i have rfid arduino long range up to 6 meters. It was our thesis just last 2 months ago and still working. We wanna sell it. R u interested? We're also gonna teach you on how to connect it on arduino. Sounds fair?

@@sidhomamine1323 to be exact. We're gonna give you the code itself that are accepting UID of rfid tag. And the circuit

wah tidak ada mas, nnt klo sempat saya buatkan

Bisa mas. D aplikasi blynk dan esp code ditambahkan saja 2 notif.

C# or c++, and any language can do. Make sure you understand the rs232/rs 485 comunication

@@mikebolon5912 okay thank you

Ini memang pake esp32 bro

Bukannya ini pake yang esp8266 bang

Boleh minta skematiknya ga bang 🙏🏻 Soalnya liat yang di sini punya saya error 🙏🏻

Outputnya cuman 1

Channel 1 dan 2

Yes you can. Make sure you can read serial data from RFID reader...

#include <Blynk.h> #define BLYNK_PRINT Serial #include <LiquidCrystal_I2C.h> #include <ESP8266WiFi.h> #include <BlynkSimpleEsp8266.h> LiquidCrystal_I2C lcd(0x27, 16, 2); BlynkTimer timer; char auth[] = "iy2srGX5m_zvvpH78jPq9a3jlUkPh9kz"; char ssid[] = "gultom"; char pass[] = "1234567890"; #define mq2 A0 // smoke sensor is connected with the analog pin A0 #define buzzer D8 #define flamePin D7 int nilai = 0; void notifyOnFire() { int Flame = digitalRead(flamePin); if (Flame == LOW) { Blynk.notify("Berbahaya Ada Api!"); } } void getSendData() { nilai = analogRead(mq2); Blynk.virtualWrite(V2, nilai); if (nilai > 250 ) { digitalWrite(buzzer, HIGH); Blynk.notify("Gas Bocor!"); Serial.print(nilai); Serial.print("\t"); Serial.println("No Gas"); } { if (nilai < 250 ) digitalWrite(buzzer, LOW); Serial.print(nilai); Serial.print("\t"); Serial.println("No Gas"); } } void setup() { Serial.begin(115200); Blynk.begin(auth, ssid, pass); pinMode (A0, INPUT); pinMode (D3, INPUT); pinMode (D4, OUTPUT); timer.setInterval(1000L, notifyOnFire); timer.setInterval(1000L, getSendData); lcd.begin(); lcd.backlight(); lcd.setCursor(0,0); // untuk menentukan posisi pada lcd lcd.print("ALAT PENDETEKSI"); // untuk menampilkan perintah ke lcd lcd.setCursor(3,1); // untuk menentukan posisi pada lcd lcd.print("KEBAKARAN"); // untuk menampilkan perintah ke lcd delay(2000); lcd.clear(); // untuk menghapus tampilan lcd sebelumnya } void loop() { Blynk.run(); timer.run(); int Flame = digitalRead(flamePin); if (Flame == HIGH) { digitalWrite(buzzer,LOW); Serial.print(Flame); Serial.print("\t"); Serial.print("Flame is Detected"); lcd.setCursor(5,0); // untuk menentukan posisi pada lcd lcd.print("AMAN :"); // untuk menampilkan perintah ke lcd } else if (Flame == LOW) { digitalWrite(buzzer,HIGH); Blynk.notify("Berbahaya Ada Api!"); Serial.print(Flame); Serial.print("\t"); Serial.println("No Flame"); lcd.setCursor(5,0); // untuk menentukan posisi pada lcd lcd.print("KEBAKARAN"); // untuk menampilkan perintah ke lcd } lcd.setCursor(0,1); // untuk menentukan posisi pada lcd lcd.print("NILAI GAS :"); // untuk menampilkan perintah ke lcd lcd.setCursor(11,1); // untuk menentukan posisi pada lcd lcd.print(nilai); lcd.clear(); // untuk menghapus tampilan lcd sebelumnya }

Nnti bro tunggu rame...

tergantung d spesifikasinya bro

i cant bro. i didnt done it ..

I'm not sure bro. But you can buy it from amazon, ebay, etc.

@@mikebolon5912 ok I need to contact you plz help me

Hello,this is Rosy from China,we are specialize in UHF reader,any interesting in this,you can contact me,I'd love to help you

pake rs232 ya? coba parsing data, jenis datanya biasanya HEX

@@mikebolon5912 sudah bro apa ada yang perlu di setting lagi yaa

Its not. Because difference tag frequency...

yes it's bro. no needed.

just 1 tag in one time bro.

@@mikebolon5912 pernah try or your assumption?

sorry baru bales. apakah masih problem?

Masihhhh

Belum bro.... Untuk ke arduino perlu interface rs232

salam bro. ada beli RFID reader macam ni ke? boleh share link?

@@muhdarif5756 Hello,this is Rosy from China,we are specialize in UHF reader,any interesting in this,you can contact me,I'd love to help you