วีดีโอ

Question.. Does anyone know what the ‘mb’ column represents in the RH function chart? 12:53 I have setup a room with an AC, dehumidifier, and some domotica magic. Now I have a steady dewpoint, and a stable 68 F. Is this all there is to it to replicate the results of this expensive cabinet?

th-cam.com/users/shorts5yg1BwUGj6Y?si=lufR9RDajhHkgdDD

What’s the point of

Finished my first run with the Cannatrol a few weeks ago. It's NUTS. Hardly any smell and then I put it in my grinder. The smell was unlike any experience I've ever had. Literally burnt my nose with amazing pungent smell. Texture, taste, and smoke/vape is next level for sure. This is the future people. So long as you do what you are supposed to do!

they say to set the temp to your room temp on the display first. perhaps some curing time up to a month for that flower in the machiene.

stripped out that screw i bought a new housing had rto make sure im doing it right

Thank you very much for the detailed video, now I can get an idea of the exact function.

Mine too. Any progress?

Thought instructions say dry for 4 days n cure for 4 days in the machine adjusting ur dew point accordingly. All u did was the 4day dry

Im saving up

Looks like too much nitrogen in flower. Did you also let it sit in the dark for 24hrs before harvesting?

What if my drivers window goes up just fine but to get it to go down I have to put the brown wire into the a spot and the blue wire into the M spot and I have to push the window up button for it to go down… I am at a loss here

Hi, any update on your Cannatrol experience ? Still Bad or did you fix anything to get a nice outcome ? @Brent Wolfe

I've read comments that their bud just smells green and is not terpy when run through a cannatrol. Has that been your experience? The dry/cure concept that it markets sounds cool and makes me want to invest in one, but I have concerns.

If you need a $1600 box to dry and cure then you’re hopeless

this takes the smell away. i guess you can get the smell if you break it up but i like my bud smelling up 1sq mile in all directions

thanks for making this video which has been very helpful for me! One tip i could offer after doing the job, is to just go ahead and completely remove the sway bar (after popping up the passenger side tie rod end, it slides out pretty easy thru that side after taking off the bushings). It provides so much more space, and makes it unnecessary to lower the subframe or anything like this (as i've seen so many suggestions to do this).

Great advice on the location of the bleed screw. Another site of supposed professional mechanics that try to sell their advice swore there was no bleed screw and that the system would bleed itself. Well it doesn't - you try that and it just overheats because the hot fluid is never getting to the thermostat with all that air trapped in there..... My bleed screw was in the same spot but was a 10mm socket because it's a 2006 Grand Prix, but same idea. Thanks. You saved me a lot of hassle.

I hated the smell for the first few weeks. But I'm hypersensitive, so it might not even be apparent to most of you folks.

But why did you get the clear one? Light is bad for your buds, no?

I bought one too. The box even fits my Smart. :D

Fuck i hope i didnt waste a lot of money

looks like this guy spent all his money on a weed fridge instead of corner bead and drywall mud. I say, splendid choice.

I wish that you showed how you connected it because l can't get mine to work. Does this device show up in the input source list because l don't see it.

what seeds were you running?

had my first run in mine a month ago and it has no terps smells hay and harsh when smoked im so mad at cannatrol i was tricked

Not all hands are y gold tho checkout blue dragon and ninja harden for 360

You're doing it wrong. You absolutely don't need the Grove bags afterwards. They are a waist if you have a Cannatrol. Just put the bud in a hemp or paper bag and leave in the machine. The Grove bags are not for long term storage, only curing which you've already done. Leaving your bud in the Grove bags will dry your bud out.

Question? How are you going to store the kolas that won't fit? Capacity looks to be 200-250gr. max. If you're able to control VPD in your grow area, (Cannatols VPD is .9 btw!) you're already golden. Not to mention, you could get a good freeze drier and a rosin press for less $. Dew point is linear with VPD. (Fact check this!) You could modify a wine fridge with AC Infinity's controller 69 pro, their smart outlet uis controller and their humidifier bada bing 💯✌️🦚

Sorry On dewpoint Let it sit for

Set your cure Cycle in dewpoint 54 to. And let It ist for 2-4 Day in hold Mode extra, on 54. Than it comes out better

waste of money imo,too small

Great video bother Thankyou so much. I pick the same model up tomorrow. I’m super stoked. 👊 💪

Congrats!! Looks good

it is just an electronic dry cabinet with a sponge for 4x the money

Got 2 and love my new dry cure storage !! Best herb hands down.

I got mines 4 days ago but my ladies have about 2 more weeks left. Can't wait to test it out.

I will get mine next week 😍

Blender motor can be something to keep an eye on

Is there are all you have to doe to have you finals de feel pressure lyding

Camera skills needs work

Thanks alot you saved me a lot of money, just what was wrong with my window, 🎉🎉🎉

Thanks for the video. I just completed this repair. The transmission dipstick kept the line from coming out of the rack. Did you bend the dipstick tube? I didn’t want to cause a leak at the base of the dipstick tube. I had to remove the return line, in order to give me more room but still had to use a soft sided pry bar to get the pressure line fitting out of the rack. Fortunately I have strong hands as I had to pry the new line back in to the rack. The return line wouldn’t screw back in until I was able to wiggle the line, underneath the ps pump. I went to the salvage yard and removed the line there, to make sure it was doable but it did not help with my actual repair, especially the difficult reinstall. But it is back together now.

Hi. I have this exact problem in a 2013 equinox. Just wondering if that was the permanent fix. If it’s still good today thank you.

I have question for everyone here when I'm warming up my 2015 GMC terrain I'm hearing rumbling noise while idling can you help me out on what it may be

Imagine them sealing it in a factory

Great Job! It's amazing how on one hand someone can take very good care of their controller and someone else in the world might as well have dumped their Coke down the left side and into the joystick area. I've had experience with both of these scenarios. The former almost 10 years ago, the latter just a few weeks ago. The first one I bought I ended up modifying it to use (mostly) genuine arcade parts. The latter I want to keep as stock. As a bonus to anyone reading this who is interested in picking one up or already has one, the ball top is interchangeable with genuine Sanwa ball tops as well as bat tops (adapter included) without any modification. I myself have always been a bat top player so the fact that you can so easily switch is Asciiware's attention to detail and even consideration for us consumers.

eppppppiiiiiiiiiiiiiiiiiccc!

which DVD types does n2000 support? My device can read only licensed games, dvd video. Dvd+Rw, Dvd-R/+R are thrown out with check error. Someone wrote it can be fixed with laser potentiometer but it is bad way to reach dvdrom box.

Great job showing how it went in. You didn't