วีดีโอ

Excellent vid, about to do one now

What website do you recommend for the LED bulbs?

I believe that the drain/filler plugs are supposed to be torqued at 60 lb/ft.

Did you ever make a corner light video for Impala? You mention doing that in this vid. :)

This is the most informative video I’ve ever watched but the way he says woofer kills me😂

i did this today amd it did not fix my shagging door and i dont know how you did it but i tried to man handle the door back on and it would fight me every single time then i used a jack and after the 8th time i gave up and pulled out the cherry picker for all of my effort and it didnt fix the issue

Is that a limited slip rear end?

Excellent job

When you clean the diff flange, be sure to prevent any old material from getting into the case.

Changed out with factory part engine light back on 😢

How have the brakes held up?

My car isn't giving me any codes related to the throttle but bucks when trying to accelerate. It also sometimes stalls at stops or when slowing down and turning. Once in a while the red throttle light with the lightning bolt flashes and i can't go over a couple miles an hour. After that is with i get a code. I've replaced the battery, the air filter, and spark plugs. I'm thinking of trying this

I got the updated tube suspension and the factor bolts for the lower control arms don’t slide in easy. Any suggestions

How did you get the bolt back on. I got a tube suspension and it will not enter smoothly

Why take the cover off . When it is not leaking . Just refill and done . Drive it for another 30, 000 miles and change again with synthetic. The paper gasket will leak a lot sooner than RVT . The RVT last almost forever on diff covers .

Great video, now I’m confident I can do it now. Thanks for taking the time to show the rest of us how to do this.

So thankful for your celica videos even to this day. Shame you sold it. 😪

I have the same truck. It's a 2000 1500 made in October 1999, so next month it'll be 25 years old. I just did this a couple hours ago and my oil was shockingly still a brown color, mostly. It wasnt completely black like this was. How much oil did you put in there? I had a quart in one of those squeezable bags, the little placard above the fill plug says to leave the level "15-40mm" below the plug. How the hell would you know if it's in that zone? lol. So I just used the quart and hoped it's high enough. a little more than a quart came out, im not sure because it was draining into something that had a little motor oil in there already.

Hi - I just acquired a 1998 Celica GT convertible as a little project since it needs a few replacements, especially all braking stuff. I see you replaced red calipers. Can you please tell me where I should order them from?

Does it have to be programmed?

i changed them about 6 months ago and it’s sagging again

Yikes, mine came out like molasses 😬

Will this stop the door from rattling when I go over bumps?

Even if using a paper gasket, you still need a light coating of RTV. If not, there is a high chance of a leak developing. I know from first hand experience.

My filter came with 2 copper washers but my old one doesnt have them on . What shoukd i do

Thank you!

I've got an insanely well maintained '98 and aside from the gazillion new factory parts the most notable torque improvement was with each of these changes: DENSO aftermarket fuel pump, Iridium Power spark, Castrol Dex 6

Putting the castle nuts back on to hammer on the threads is so silly. Please don't do that.

Exelente video bien explicado paso a paso, saludos de mexico

Your diff cover is missing the magnet which you should install.

Bro I have a 99 celica and it look exactly like yours

Bought the factory oil, but a cheap Felpro gasket. 😂. The Gm silicone gaskets GM has for the 6l80's are really nice and reusable although I would alway swap in a fresh one while Im there. The added price is cheap insurance. If I have parts I replace and the original was good, ill keep them in my plan B parts bins. Im keeping my truck till I can't glue the rust back together anymore. 😂😂

Awesome 👍🏿

New channel chrisfixit???

This is a fantastic video good job

The OnLY video I need to watch , no need for anything else , Thanks !

Great video .my belt was slipping I bought a new one . I discovered the bottom bolt that holds the tension adjuster came out . Any one know the size that holds it on . ?

You make it look so easy bro I got two evl 10 2000 how much amp do I need ?

Chris Fix ?

Thanks to the link in this video, I have my front hubs on the way!! Should get my celica on the road again soon

Does that make it waste gas ?

I have the same truck and just FYI you don't have to remove the seats to take off the plastic panels along the bottoms of the doors, if you'll pull on them they snap right out and they're held in by clips. I've had mine out numerous times it's very easy. 👍

I want to add a winch to my '69 C-10. Old trucks were all 'arm strong''.

This video helped me out more than all the other videos.... Very good narrative💪🏼

Chrisfixit

Why would you not run power so the radio turns on and off through ignition switch?

18 ft lb for t-case

I refilled my 05 yukon t-case after 52 ounces leaked out. It holds 64 ounces total. I ran out of auto trak fluid after 26 ounces and made a mix of 50/50 merc3 atf to 10w30 motor oil for the rest. So far so good. I understand any ATF is fine. I put a little oil to add to lubrication since it ran short for an unknown time period.

Sorry dude but how the hell did you get your hand up in there to get the clip off for the driver side Upstream sensor without dropping the drive shaft.

A little late but thanks for the info worked to perfection. Able to hoist the door from rafters so it made really easy.thanks again