วีดีโอ

I see none of the questions are being answered....but i'll ask mine.....what is the process if i wanted to re-seal an already completed seam... more specifically, the roof ends/edges..

THe electric company threw away a bunch of this stuff and i brought home a lot of it, not knowing quite what I would do with it. I think I'll make a floor for a greenhouse and the runway for the r/c airplanes now that I know how to stick it together. Just need to figure how to hold it down when it gets windy.

Don't buy don't have it fitted. It turns into a warn out tissue absolute rubbish felt has made its come back for good

thats all very well on the smallest roof known to man!! Ive got to cover a roof over 40' long and 15' wide. It aint going to go like this demo, to be homest that demo aint much use for anything bigger than a small shed size. Different product for me i think.

Where you have a rooflight involved, is it easier to have the membrane in two pieces and join them, as shown here?

Well boys, after 10 years I thought at the very least this deserved a single like. Good effort.

There was a wrinkle which can cause puddling.

So its not necessary to use a cleaning product before priming?

Do you need to use a cleaning agent?

Young Paul Anderson Michelle Wilson Patricia

How about contact adhesive on the overlap piece - how do you achieve that? ( 4:55 )

Nooice!

Can this be joined either left to right or front to back?

Is there anyway of installing in one piece when the osb box is already fixed in place?

Not a roofer the curb not even flash right wouldn't pass inspection

It seems that the primer is a thin adhesive. why is the tape (additional layer of rubber and two extra layers of adhesive) needed? Everyone does it this way, but i dont understand why. the cost difference is very large, so there must be a reason why adhesive alone does not work for EPDM membranes.

What about the corners?

What adhesive are you using?

What adhesive type do you use

I wish they would do a real project on a roof with 40mph wind blowing!!

Hi Stuart, Sorry about that but we would have been in the way of the camera if we were on the roof. It's actually easier to do from in front of the detail if you are not filming. Hopefully you would have scaffolding to help anyway. 😀

Wish we could stand on the floor doing a roof

This crap and fiber glass should only be used on sheds /out houses/chicken coops and on a home.WANK be warned..!

Wish we could stand on floordoing aflat roof

No

What settings do you put on the leister for fibertite?

I have a question. Is there supposed to be any pockets where the rubber roof meets the side of a shingled barn side? Isn't supposed to be tightly secured?

do one with scupper in the corner

As a building envelope consultant of 35 years I can't take this video seriously because attaching a membrane to OSB is just about the dumbest thing in the world. You have to use Quality Base materials that when they get wet will not turn into oatmeal

Can this Rubber be applied on walls too, if not what is an alternative to wrap the walls that have no overhang ?

Having call backs on ply techs corner tape, their primer is too thin, the tape isn't flexible enough and doesn't bond properly. Never had this problem with firestone corner tape and primer but stockist switched to ply tech, guessing cos it's cheaper. It's annoying cos it's costing me money and makes my work look bad

Can't you cut the rubber on the internal corners? And use the tape to make an internal corner or is folding the rubber the only way?

Hardly fucking rocket science

Rookie

Flat roof gudring ege

Why no cricket in the corner to direct water out of the corner? How come you didn't take the rubber up and over the parapet?

How much does it cost one square meter?

Wrong

That music is unbearable

EPDM (Ethylene Propylene Diene Monomer) Rubber Membrane is very durable and one of best waterproofing system especially for large areas. We Al-Khuraif Group (Rehabilitation & Waterproofing Division) are Trade Special Contractor for all type of Waterproofing from Bottom of the building to Top, Including concrete repairs, all type of Epoxy Applications, Fireproof Applications, Polyurea & Polyurethane Foam Spray System, Structural Concrete Failure Reinforcement & Repairs Works. Contact in Saudi Arabia: Rehabilitation & Waterproofing Division Abdullah Khuraif Group Cell # +966-507254505 www.khuraifgroup.com info@khuraifgroup.com MunirBaigMirza@khuraifgroup.com MunirBaigMirza@gmail.com

i was told you technically have the rubber either way up and either way was waterproof! however its ugly and lazy to have writing side showing!

Been welding fibertite for 9 years looks like a good weld but I would suggest to keep that roller flat at all times . Bad habit to break for some aka stitch welding .

Why didn't you explain what you're doing instead of the elevator music?

It is harder when you are on a roof!

Dreadful music 🤔

Im a firestone guy

Its the milk man

Yeah you could do it this way but no pro ive ever seen would i worked for big companies like single source and others No no no

Rediculous ive been installing epdm 17 years can u make it take longer i would fire that jackwagon and throw his tools in the dumpster its painfull to watch this

Next time use more rubber, and cover the top of the wall and curb. Leak disaster if you think the cap metal will keep water from penetrating, or disallow condensation.