วีดีโอ

2:57 I have these on my Lindyn Sectional and desperately need to move the pieces. Can you explain how I can do this?

Thank you, super enlightening! 👏🏻

What compressor power did you use

My recliner stopped working. It has usb ports also that are not working any ideas on the issue?

I have obtained a Gibson power headrest dual motor power lift chair (model 121841) that has no remote to operate it. How do I go about getting a remote for it? Badcock (where it was purchased) has closed their stores so that is not an option in to obtaining one from them? Any advice.

Oh, thank a lot.

Shoo! Great to know that one of my client’s well-loved chairs just had a loose cable. Thank you for this!

What hose adapter did you use. Are you still using it and recommend it?

This was awful he didn't show the connection with the pins or explain how many pins there are. Or if an adjustment needs done to reduce from 5 pins to 4 pins. Guys tell the whole story .

You are a life saver! Tysm for this video!!!! Can you please tell me where you got the leather from and the exact color? For years, I've been dealing with this torn-up California king headboard. The bed is sentimental to me, but it's in such bad shape that it's stressing me out peeling and shedding for so long. Also, I don't have staples on my headboard, but it has round circular metal pieces embedded into the edges of the leather. Do you know if those are removable, and if I could use a staple remover to remove them as well?

Thank you! Helped a bunch!

Great video. I had the exact same mechanism on mine

I just want to restore the shine. I can’t take the whole thing apart

Thank you! My $3,000 disability chair has been quite a letdown. I struggle with chronic back and pelvic pain, and what I really need is something soft-like sitting on a cloud. Unfortunately, I feel more like I'm perched on a hail storm instead. The chair is covered in zippers. But now, I feel ready to tackle this project and transform it into the comfy, fluffy cloud I’ve been dreaming of. 💕

As an approximation, a single stage air compressors puts out about 3CFM/HP. If you need 12 CFM at 90PSI you have to stop blasting if the compressor tank pressure drops below 90PSI. A one horsepower compressor could only blast 25% (or less) of the time. If you have a 5hp compressor it might supply 12CFM (but a 7.5HP is probably more real) and you could blast continuously. Smaller horsepower means lots of stop & starts to fill up the tank. A bigger tank means a longer blasting time between stop start. Keep an eye on the pressure gauge (above 90PSI) or just don't blast while the compressor is running. A trade off for needing less CFM is to reduce the nozzle size. That would get less work done but reduce wait times as the compressor cycles. Anybody want to offer additions or corrections to this?

How to add filling to just the footrest?

I have a manual reclining sofa that we've had for years made by Palliser Furniture. When you manually push back to recline it tends to go back in the forward position. Is there a mechanism (bolt/nut) that I can tighten to cure this problem? Thanks

Great video. Most fundamental problem with recliners these days is lack of lubrication. AS SOON AS you buy one immediately oil ALL the pivoting and moving parts otherwise those rivets bore and wear wider holes in adjoining parts. Friction is the worst for of recliners. Another problem is plastic bushings, rollers always seem to wear out. Not much you can do about that. And of course tighten all loose bolts and screws.

Looks good!

Thank you for this. I'm using sandpaper at the moment and was looking for a better way.

Thank you sir! Youve helped me out. Sending love from Papua New Guinea 🇵🇬 ❤

Where are u located

So what do I do if that screw broke in half? How would I I get that part of to replace it?

Of all the videos, this is the one that helped us out! Thank you.

Hi. Love your videos. They’ve helped me out a lot. I’ve also learned a lot from you. So thank you. I’m having a problem, figuring out what compressor I need to soda blast some furniture. You mention Harbor freight. Would it be possible for you to show me / tell me what compressor I need. For some reason, I am brain dead, figuring this out. Lol. Lowest price if possible. I really appreciate it

Just read an article stating that power recliners should NOT be plugged into surge protectors...or if you do, make sure there is little other power-sucking devices on it

Thanks for doing this video!! Helped a lot.

Great video, very informative!! 👏👏👏😍😍😍

K....now what if they don't have zippers...

This seems like it would help many people, but it doesn't seem to address my particular problem. When i press the button, normally the legs would first come up to horizontal then if i continue pressing, the back reclines. Now, the legs only come up about a third of the way then the back reclines and the seat part raises! I found out that the manufacturer is out of business (Klaussner) so I guess I'm out of luck.

There is no help if the handle and wire connection is loose??

Do you have a video on how to fix a leaning manual recliner? All of the videos I've looked at, and the articles I've read, talk about straightening the 'reclining mechanism' and I have no idea what that is or how to do it. Could you help me, please? Thanks! Btw.. I love your videos! I'm learning a lot!!

Thank you for the video! It's very helpful and gives me a much better idea of how to get started on replacing my pressboard seat correctly.

At about 3:00 you threaded the needles and “did a simple knot” but it was all off camera so I have no idea how to do that. It’s not obvious to me.

Thanks for the demo. Bought blades. Hope to reduce the time spent doing away with the staples used to attach fabric to MCM chair backs as well as the seats. Safety glasses or goggles? Is one left with staple leg fragments that should be hammered into the wood?

For god sakes would you please just answer the question what size compressor

Where would be the best place to find a replacement bolt for the mechanism? Anyone know the exact size. It looks to be tapered.

Could have showed a little more detail on how the srings go

How do you line the side by sides up correctly

Great, thank you, now if I only knew how to get to it without ripping the material off.

I’m at the beginning of learning how to use a soda blaster. I’ve watched so many videos and I’m very confused. I love Harbor Freight, my area store knows very little about what I need. Is there anyway you can help me figure out what I need to get started? Maybe Harbor Freight or Amazon? I really like your videos. I guess I’m having some kind of a brain freeze on what I need to get. Thank you.

I recommend when you get to the sub layer cover, only take 3 sides off and pull it back unless you are replacing the cover, that way it makes it easier to install and in the exact location.

This was great but the Real Problem with all these recliners is the flat forward part of the leg/foot rest, how do you refinish or repair and or replace as it looks flat and non serviceable

Question, I have a series MS17-D1-1015-03 recliner. Once the back is on, the back will not recline without the foot rest open. It this normal? It's very uncomfortable. Thank you for your time.

Do you think you could use that on a plaster statue to take off paint with out destroying it?

Hola, tengo el problema que cuando se reclina hacia atras no se queda fijo, se devuelve...

What is typically the issue if the power supply blinks slowly when pluged in to the sofa, nut is a strong solid green when unplugged? Already checked all the cables for damage and made sure no USBs were plugged in to it. Any ideas? Maybe the switches?

Great job

I have had a power recliner for about 7 or 8 years. Yesterday the chair started making a horrible grinding sound when trying to raise the foot rest. I flipped the chair over and the white plastic part that is on the track attached to the motor was snapped in half. Is there anyway to replace just that plastic part or would i need a whole new motor mechanism?

Thank you for this video. Gave me some confidence also! I have a modular sofa set and bought the metal alligator clips. Since there isn’t any diagramed installation instructions that are clear and concise, might you share some tips on how to measure and place the clips for the best results. I am worried that the wooden sofa frame isn’t thick enough and/or if the wood become damaged over time? How well do these clips hold up over time? Should I reenforce the wood or is there nothing to worry about? Last question…why would a manufacturer Not place clips on the modular sofa? Too frail..etc? Thank you in advance, All the Best!