วีดีโอ

I got an idea, use it for target 🎯 practice for a few week ends, and you have fun at the same time 😊😊😊😊😊😊😊

I normally cut bottom out And punch holes in barrel. I used a claw hammer once to bang holes in barrel. If you dont want dents in barrel, you can just use a hammer to bang dents back out. Have fun guys burning wood this winter

Can you put a screen over top to block hot ashes flying out .. ya that is 1 inch holes, i am sure that size holes will allow for a great burn even with a safty screen over top

"I took something that fit in there". What is the 'something' and where/what is the 'there'.

Thank you for this. The chair I just finished came out great!

I should've read the other post first...thanks again.

excellent!! Can you reset the battery without un-solding it?

6:29 fixed my chain saw 👍

tried the jump-start, fail☹ took apart the battery pack and w/out de-soldering, prying up the small spot welds on (2) of the batteries(not a pretty sight) then using a small flat head screwdriver, pushed caps... "pop" success! my 11month old 20v-battery in now charging again! Thank you!, Thank you!

Ya but don't I need a special tool to do these spot welds on bettery cells?

Wow! That's one great modification. Now to the detailed version and making one. Thanks a lot!

Good video sir. Would you say the Craftsman 19.2 tools have a similar performance level at the Dewalt 20v tools once the adapter is used? I have a ton of the Craftsman 19.2 tools and some Dewalt 20v..

Awesome job. Thanks, real informative and a way to help the ppl🇺🇸🇺🇸👍🏼

excellent video ty

Thank you for this video. Jumpstart did not work. Was able to reset it as well and now it charges just fine. Two cells I heard a "pop" noise when pushing down on the cap. Did not have to de solder. Thanks again!

Thank You Sir!

Hey, great video! thanks for sharing this.. Are you able to reset the CID without desoldering the cell?

You just empowered a woman with a problem

I now have 1,001 reasons for my ⛏️

I haven't tried this, I got an old pick axe around somewhere should I sharpen it first?

Dude…. GENIUS!! I considered buying this crazy cone shaped bit for $60 to make holes. WHY do I over complicate things?!? Thanks for saving me my sanity and $60!

Cool….is it possible to push that cap down without desoldering the end ?

This would be perfect for axe handles.

hundreds of videos on this topic, this is the only one that is worth watching. YOU ARE MAKING A BURN BARREL PEOPLE NOT A WORK OF ART!

What screwdriver bit did you use to separate the battery case ?

This trick worked for me one time. The 2Ah packs are forced to work too hard and that's why they get so hot. I replaced my 2Ah packs with the 4 Ah packs and haven't had any problems since. I thought about repairing my 2Ah packs but (decent) cells would cost more than buying a new 2 Ah pack. Marketing. 🙂

How do you solder that tabs back to the battery? They seem to be spot welded. I’ve not had success getting solder to adhere.

War is accelerating global warming so Canada is accelerating global warming by promoting war.

These things are ridiculously dangerous.

You may want to research HAARP. It’s in Alaska.

vslusble video.

There’s a flatspot on the router body that makes it possible to slip it in without grinding the base. I have the same setup and it fits.

Great way of doing it 👏

This seems like a better option than buying Lithium ion batteries for the Craftsman because you will have Dewalt batteries and buy upgraded tools. I say this after buying 3 batteries for my craftsman set

Wow super ill look into this I did run my pack down I bet it did pop

Tried jump-start method first, didn't work. Just did this and it worked perfectly. Thanks

👍👍

cool!

While this "works" it essentially disables the safety mechanism. If whatever caused the cell to vent the first time happens again it can catch fire or explode (right next to 4 other cells). If you battery pack catches fire while in your garage and burns your house down your insurance company will use this video evidence to deny coverage. Replacing the bad cell with a new one would have cost you a few bucks.

Thank you for this - I didnt even know this adapter existed. I have many Caftsman C3 tools that still work and currently have a good set of Lithium-Ion batteries/charger but its good to knoe about this option for the futhure. Paul (in MA USA)

Thanks for video.I have a bunch of dead cells . I think dewalt are junk but I am stuck with them

Thank you!

Gotta try this with a 60v that I have that will only jump start to 14v. Will not charge beyond that. I'm assuming only 4 cells are functioning.

Promo*SM 👏

Problem.with holes in side the will burn out quick...making it junk

This worked for me. My issue seemed to be that I added the DCB094 USB charger to a brand new Dewalt 6mAh battery for my wife to use a USB LED light. I believe it discharged so slowly that it snuck past any electronic stop and made a cell "pop." Be careful about very long-term low level power drains! I was surprised that I didn't need to remove all the cell connections to test voltage on each cell. I tested each of the eight cells. Each gave 3.66V then two gave over 4.5V - I did the manual reset on one and it started charging again. The charger stops at two of three lights, but hopefully all the voltages settle and I can get to a full charge after using and charging the battery over time. SUPER HELPFUL!!

Thank you. I think that I will do the same

Great Hack Sir. I will try that on a 12V dewalt post battery no longer available. Jump start did not work. Likely not used for years perhaps decade. NiCad. I thought those connections had to be done with spot welder. Becareful when soldering. Minimum heat. Battery inside a pipe.

This help me a lot.. thank you very very very... i search about each piece size price and its a bit expensive i tried this method and kaboooom its works

🙈🙈🙈🙈🙈🙉🙉🙉🙉🐒💩💩💩💩👎